How to change a Serpentine Belt on a 2015 Hyundai Sonata 2015 [Complete Guide]
Vložit
- čas přidán 23. 07. 2024
- Find out how to change out a Serpentine Belt on a 2015 Hyundai Sonata SE 2.4-liter 4 cylinder engine.
Tools:
1. 17mm Combo Wrench - amzn.to/3jrwqCS
2. Flathead screwdriver - amzn.to/2RAjTlU
3. contenital serpentine belt 4060397f
00:00 Intro
00:07 The Project
00:45 The Fix
01:48 17mm to Tensioner Pulley
02:19 Removing Old Belt
02:35 Inspecting Old Belt & New Belt
03:10 Installing New Belt
04:53 The Test
This should work on all the 7th Generation modules - 2014-2019 on the 2.4-L 4 Cylincer.
If these instructions helped you, please "like" and "subscribe." Have a question, ask it below!
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #serpentinebelt #autorepair
Supplies used to record this video:
* GoPro Hero 7 Black - amzn.to/3f3ALtb
* 256GB Flash Drive - amzn.to/33pAueG
* Vlogging Frame - amzn.to/33tajE0
* GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu
* Youmic Lavalier Lapel Mic - amzn.to/2R55sWX
* Boom Stand (tripod) - amzn.to/3bdkQaw
* 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM
* Portable Battery Powerbank- amzn.to/3vJQc0q
* 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH - Jak na to + styl
Very good video, liked how you described everything in detail from where the hood latch was to how to angle the 17mm wrench.
You are welcome!
Those belts aren't too bad to get off, but getting on can certainly be a challenge. Thanks for this informative video on how to take it off and put it back on a new one!
You are welcome. Thanks for watching and commenting!
Mine snapped yesterday during this Wisconsin storm, fixing myself today because of you. Thanks man 💪🏾💪🏾
Glad I could help. Thanks for watching!
what happen when they break
Thank you!! I had a heck of a time getting the wrench to stay on the tensioner. I had to use the other side of the wrench and then it went right on. ✅
Glad it worked for you!
It worked perfectly for me I did this job by myself in 15 minutes thank you very much I already have 96,000 miles on my sonata the belt was already very damaged
Congratulations! Thanks for letting me know!
What year was your car?
@@nardcore661 2016
@@MCFIXITI have a question please. My belt was broken so it was replaced. Everything was fine for 2-3 days & now my lights are starting to flicker & power steering light came on(same symptoms a few days before belt broke). Could it be one of the pulleys even though so squealing sound is coming from then while car is on?
I had a squeaky noise come from mine@@tlynn609
Very good, thank you for your help. Took my son and I 30 min or so to fix his car. I am not a fix it guy, but you made this very understandable.
Glad you were able to accomplish this fix! Thanks for watching and commenting!
Thank you! Thank you! Thank you! I will say you made it look easy haha but definitely good direction! I was able to get it done with your help! Hardest part was getting the new belt on 😭 ! I have never done it before but definitely won’t hesitate to do it again! Thank you 🙏
Glad you were able to do the project yourself! Thanks for commenting!
Best video I’ve seen. Very straight forward. I changed it in literally 5 minutes by myself. Thanks
Glad to hear it was helpful!
Good fix. Keep the vids coming
You are welcome. Thanks for watching and commenting!
Thanks got it done in 10 mins
So glad it was helpful. Good job on doing it yourself!
Worked Perfect thank you🙏🏾
You are welcome. Thank you so much for watching and commenting!
Im about to try this right now. Goin step by step with you. Same model car as well.
How’d it go?
@@MCFIXIT Man you helped me big time bro... Went almost to easy lol!!
That’s great news!
Very helpful thank you!
Glad it was helpful! Thanks for watching and commeting!
Awesome video👍
Thank you for watching and commenting!
Thank you, Sir! Once I got the right wrench (same one from video), it took me about 20 min to put the new belt on (Walmart wrench kept slipping 😅)
Glad it helped. Thanks for watching and commenting.
Thanks brother!
You bet! Thanks for commenting!
Thank you!
You are welcome. Glad it was helpful!
Thanks. Blessings
You are welcome! Thanks for watching and commenting!
Thanks!
You are welcome! Hope you have a great day!
Thank you
You are welcome!
Thank you!!!!
You're welcome!
Thank you. I was trying to pull the belt over the alternator pully lol
You are welcome! Thanks for watching!
Would the tension ever need to be adjusted when doing this exact car? Or should it just slip on with the same tension as before?
It shouldn’t. Your tensioner might be busted if it doesn’t work like this. It should hold it in place once the belt is properly lined up.
hello so the the water pump pulley need its own seperate belt if so whats it called? im going to replace them and i want to make sure i get the right ones both are mine are torn.
Accessory belt. Sorry, this was on my parents vehicle and my dad just wanted to serpentine belt done. So that's what I did. They no longer own the vehicle. I'm sure there's a video on it though!
I know this was 2 years ago but do you happen to know the length of the wrench you used?
I don’t but it was a standard size (not extra long). Sorry! Thanks for watching and commenting
Is this the same steps, for the 2.0 turbo model? Or extra steps.
Great question! I’ve not worked on the model of it. Let me know what you find out!
Great video! We have the same car. May I ask how many drive belts does our car have? The dealer quoted me for Qty. 2 serpentine belt replacement for $450.
Sorry, I can’t remember. I did this on a friends car a while ago and just got to editing the video. It might have a second belt for accessories.
Its 2 belts
Thanks, this helped me out a lot. I thought I was going to have hire an election to fix my issue.
You are welcome. Thanks for watching and commenting!
Hire a what? You mean mechanic?
Love your channel, fellow Ridgeline owner. 🖕 Great info thank you. I need to do the serpentine belt on the Ridge, next possible video? Cheers. 🙏
Thanks 👍. I will need to do the belt in about 40,000 miles so it might take some time before that one is filmed. It’s a pretty easy process. Make sure to get a serpentine belt tool (long, thing tool with a 3/8 drive on the end) and a basic mm socket. I’m sure there are other CZcams videos on it. Thanks for watching. Hope you can successful change out the belt.
@@MCFIXIT Thanks so much for the tips! Great channel, trying to watch all the Ridge vids. Great content! Cheers and thanks again.
Thanks so much! I appreciate the positive feedback. I love my Ridgeline and hope to have for many more years to come!
DID THIS TODAY! USE A SHORTER WRENCH SO IT GOES UNDER THE MOTOR MOUNT BRAKET AREA AND ARE ABLE THE MOVE THE TENSIONER MORE ITS A BREEZE AFTER THAT YOU DONT NEED 2 PEOPLE
Thanks for the tip!
Shocking the white paint isn't missing. A lot of them do
Yes that happens for sure!
استخدم كماشة الاشتراك لتثبيت الحزام على بكرة الدركسون وكماشة اخرى على بكرة الكرنكcrank ثما قم بالتركيب الثنيتين الصغرى بين البكرات الصغرى وايضا تحتاج لسلك تربيط البلاستيك لتثبيته مع قاعدة كرسي المكينه اذا كنت لوحدك تعمل😅
For clarity, you started at the crankshaft, then ac, then alternator and then lifted the tensioner and slid the belt under?
That will work. You just want to be sure to leave room for the tensioner and be around each part correctly. There are many ways to do this with what part you start with going around.
Thanks for watching and commenting!
@@MCFIXIT copy that! Thanks for the response and this video!
You are welcome. Best of luck on your project!
How did yall get it on I’ve been doing this for 3hours this some bs
Were you able to get the belt on? There is some difficulty due to the tight location
@@MCFIXIT Yeah i was able to get it on, i flipped my wrench to the open side instead of the closed circle and I had to buy a shorter length to get enough clearance to fully extend the tensioner making it easier to put the belt on
15 minutes 😂😂😂!!!! You funny bro!!! You must got munchkin hands!!!
My hands are actually pretty large I’m 6’3’’. Did you get it work?
@@MCFIXIT I was replying to one of your followers who said he did the job in 15mins!😂 There's NO way you can get that done in that amount of time especially by yourself! I tried to do it by myself for an hour and a half, and until I asked my wife to help me, I wouldn't of been able to do it. YOU do need another person to help you, for sure! Yes, your video was very helpful. Thank you. Now, I might have to change the water pump belt later. How do you do that?
I have not done it in this vehicle before. Not have done them numerous times. This was my parents vehicle but they sold it. So I won’t have a video on this.
I changed it car still not starting with jump
We’re you having starting problems before the replacement? Was your belt broken or thrown off?
What size belt?
I used a Contential belt 4060397F. Hope this helps!
ماهو رقم قياس السير او الحزام
6pk1007
If someone isn't smart enough to know how to open the hood, they shouldn't even attempt this.
I like to full instructional videos. Each vehicle has different locations for the hood latch. So it can be helpful to some. But I get what you mean!
Also helps if you actually have the right tool 😅
Were you able to fix it yourself?
cant believe the dealership wants to charge me $350 for this job, while they already are doing a factory engine replacement.
That’s crazy sauce!!! It’s so easy to change out. It would take probably less than 1 min if done before the engine was installed
Just put it on the pulley first and alternator last
That’s def an option!
Why is it that whatever task they are showing you how to do, looks simple and easy in the video, but in real life, you find yourself beating the car with a hammer because your so frustrated that the belt didn't go on as easy as they showed in the video .....lol ..my tensioner was tense and it took a lot of force to release that tension in the first place, and you have to be careful becaus the air conditioner line is right where your working and its easily dented or damaged on the process....I spent literally 2 whole days trying to get my belt on. Maybe it's just me and I'm a bit mentally retarded but that sucker was hard it even broke my long tool designed for the job...uhgg never again
Sorry the project was more difficult than you expected. I try my best to show exactly how I did it. Were you able to eventually finish the project?
Bruh, i cant even fit my hands down those holes. I dont get how this dude puts his whole arm down there.
I’m not a little guy by any means. This was done on a 4 cylinder. Is yours maybe a v6? That might explain the difference in size.
i Hate Hyundai with a passion its every month this car gives me problems
Sorry to hear that. All cars have problems but some of a lot more than others. Best of luck on your repair