How to fix a noisy Kenmore Dryer - Step by Step
Vložit
- čas přidán 22. 08. 2022
- Does your Kenmore dryer sound like a rock tumbler? Well this video is for you then! In this video I will show you step by step in detail how to repair a noisy Kenmore dryer. We disassemble the dryer step by step, clean everything up, inspect parts and replace the drum rollers, belt and idler. Why pay a ton for a service call when you can do it yourself for less than $40
Please be sure to leave a comment for any new content you might want to see also.
If you find this video useful, please hit that Like button and make sure to click the Subscribe button so you don't miss any new content. Thanks for watching!
Tools used in this video:
Phillips Screwdriver or bit
5/16" bit or nutdriver
Impact driver
Thin Putty Knife
Parts Used:
Part # 4392065 Dryer Repair Kit from Sears Direct (link below)
www.searspartsdirect.com/prod...
Thanks for Watching!
Follow me on Instagram: @the_guyofalltrades
#dryer #kenmore #repair - Jak na to + styl
I'm a stay at home mom with little background in appliances, whose husband has physical disabilities, so this helped so much in teaching me to fix my noisy dryer. It runs like a dream now. Thank you!
That’s great to hear! Glad you were able to use my video to help.
@@theguyofalltrades
Thank you, got mine fixed by watching your video! Everything was exactly as in the video. Mine is electric.
Welcome! Good to know the electric version is the same
Same here with an electric version. I just went to my local parts shop and gave them the model number and received a repair kit. I too struggled a bit to get the triangle clips on but managed. Also installing the new belt was a little difficult as it tended to flip so a second pair of hands with that would of helped.
The belt is definitely the hardest part of this whole rebuild.
Really good step by step and great explanations of what you are looking for as you go and even how to put it all back together!! (Many how to videos just tell you to "put it back together!") Appreciate the details that you present from start to finish! 😃 Giving it a shot!!
Thanks and thanks for watching! Good luck
Thanks! Best video I found that I could actually follow along with. Appreciate it!
Thanks for watching!
Thank You... saved me $500 at least!! (Wife wanted a new Dryer!)
Welcome!
I was going to make this repair and showed my mom your video- she was hesitate because you ran out of breath:D Great video thanks for the education! thumbs up!!
Welcome !
Me an my father just replaced our support rollers an belt for Kenmore series 500 very similar very helpful !! Thank you for this suppeeerr helpful step by step video, much appreciated !
Welcome! Glad I could help
This video saved us hundreds of dollars - thank you!
Welcome!
Great job! Details on every step. Thanks.
Thanks and welcome
Thanks for this video, I found it really helpful. Step by step was on target. Good tip to use a magnetic drill to unscrew and screw in the screws. You don't want to lose those (especially when putting the dryer back together!!). The thing I (and most people from what I can tell) found to be the biggest struggle was putting the front panel back on. I recommend getting someone else to hold up the drum then attach one side then the other. Thanks again!
Thanks! Yeah front panel was a pain to get the bottom clipped in and staying in place while attaching the screws up top.
Thank you this really help very good step by step 😊
Welcome!
Thanks for sharing 😊 great vídeo.
Welcome. Hope it helped
Good Job, Great explanation, Thanks
Thank you! Very welcome.
This helped a ton! Thank you!
Welcome!
Thanks Man By far the best video on how to repair the roller wheels💯👍🏼 Dont forget "camera falls" 😂
Lol. I started adding all the fails to my news videos at the end
Good video, thanks for this!
Thanks! Welcome hope it helped
Be sure to use gloves or use caution when taking apart as edges of panels are super sharp. *Speaking from experience 😂
Great video though definitely helps a lot of people!
Oh yeah those punched metal panels are sharp. Thanks for watching!
Very good video. Just a couple tips. WD 40 on a cloth does great job cleaning shafts .the shafts can accumulate a sheen of burnt rubber from wheels. Great point you made to vacuum out unit and while you’re at it clean or replace dryer vent. #1 cause house fire. Last is take the time to be sure belt not twisted and channel side it flat on from and drive pulley. A twist in belt doesn’t always self correct and belt can get stuck slipping on the drive wheel. Great video
Thanks for watching
great video. thanks for making it.
Thanks for watching!
Very helpful video, thanks man! Luckily ours just had something lodged in between the front panel and drum, but with your video I felt totally prepared (same model) lol. I would recommend beginners use gloves, those parts are sharp.
Thanks for watching! Glad you got it fixed
I will be doing this repair, thanks
Welcome. It’s pretty straightforward. Mine is still running great since I made this video
I owe you a case of beer! My dryer is now purring. You're a lifesaver!
Awesome! Glad I could help
Thanks a lot for your video,I got my dryer fixed and my wife off my back.
🤣 only thing louder than a noisy dryer is a nagging wife
I found out what the tiny tabs are on all 3 sides of the triangular plastic clips.
Once you get 2 sides on, using needle-nose pliers makes it easier, you grab the tiny plastic tab on the 3rd side and gently pull up, it then goes right on.
I also thought about putting masking tape around the first groove in the pins. That way the clip should slip right over it with ease.
Thanks for making the video !
Those things were the hardest part of the job. Good tip I’ll keep that in mind if it ever fails again.
Nice job !!
Thanks!
perfect vid, thanks
Thank for watching!
Excelente Job
Thanks for watching!
Awesome
Thanks brohan good video
Welcome thanks for watching!
Thanks man
Welcome!
Thanks
Welcome! Hope it helped!
Nice thank you 😅
Welcome. Thanks for watching!
Great post brother, you made my life easier and now I can impress my girlfriend :) I just subscribed to your channel, looking forward to future posts.
Thanks! Garage door opener install/replacement video coming soon
We’ll explain thanks!
Welcome!
What’s the end of cycle signal sound like this dryer
I don’t believe there is one now that you mention it. That might be worth me looking into. Normally the older dryers had a buzzer.
Anybody know where to get the shaft from? I can’t find this model number online
Check Amazon maybe. There are parts breakdowns if you google the dryer model number
You don't always have to replace the rollers. I just vacuumed out the inside of the dryer, removed and cleaned the rollers, added some graphite powder, and reinstalled and dryer is very quiet again.
True. Did you see the rollers in the video though. Smoked
Where I can buy the roller
You can get from sears parts direct or Amazon. Just need the model number of the dryer
Thank you for at least showing us why and the noise it was making before doing the repairs. Most videos. Say hey, look at me replace this. And then we are left wondering what the noise was.
Welcome. Thanks for watching!
Do you trun off the gas
You can but don’t have to unless you need to work in the valve in the dryer or pull it out further than the gas hose allows
Do these need any kind of lubricant?
Nope the bushing is oil impregnated bronze I believe
@@theguyofalltrades good ol ampco. Thank you sir for the quick response. Subscribed.
Mine is good, just needs to replace the belt and done
Should be pretty straightforward then. Hope the video helps
those triangle washers are a pain to deal with
You know it lol
What’s your dryer model number?
Type: DWJR-NAT-1206006-FM22
Also has a mod number of 110.71402311
Having a hard time reinstalling the front panel
It’s tricky you have to make sure the hooks are engaged. I definitely cussed it into place lol
why didnt you run it so we can here the problem maybe we can relate to it??
Sounds like a rock tumbler. Metallic noises. If yours is broken you’ll know
He did let us hear it at the beginning of the video. Would have been a good idea to listen at the beginning
@@byrdathletics8354thanks for the backup lol