Removing Broken Nozzle Threads From an Airbrush
Vložit
- čas přidán 25. 06. 2020
- Thanks for clicking on QuickTech.
Removing broken nozzle threads can be intimating. We show you how to remove broken nozzle threads safely with just a masking knife and a few easy turns. Then you’ll be ready to install your new nozzle and get back to painting.
Airbrush nozzles are made from soft metal to ensure air tight metal to metal connections. Small fixed nozzles have delicate threads and can occasionally break. Take care when removing nozzles for deep cleaning or replacement and always make sure you have a spare.
The technique shown here will work with any airbrush which has a small, fixed nozzle. Please note that airbrushes with compression fit nozzles, like Iwata Eclipse CS, do not need to have their nozzles unthreaded. Compression fit nozzles are considered a single piece.
Be aware that some airbrush parts, like needles and nozzles, wear out over time and will need to be replaced. Think of these parts like the tires on a car.
Why QuickTech? There’s no shortage of how-tos and tutorials on the internet but airbrushers are still searching for solutions to common problems. That’s why Iwata created the QuickTech Experience. We’ve created videos that get right to the point so you can fix your problem and get back to painting. No intro to skip, no banter to mute, nothing to speed through. Just the content you came for from the most trusted name in airbrush. Be sure to subscribe to our channel so you don’t miss the next QuickTech release!
***
Before disconnecting your airbrush from the air hose:
1. Make sure your compressor is off.
2. Then hold down the main lever to release any stored air.
***
- LINKS AND RESOURCES -
Products used in the video:
Neo for Iwata Neo CN airbrush: www.iwata-airbrush.com/neo-fo...
Need help finding a new nozzle?
Visit our Airbrush Parts Finder: www.iwata-airbrush.com/airbru... - Jak na to + styl
Boy, you saved me from a mental breakdown and panic buying a completely new airbrush. You, sir, are a godsend, and have my eternal respect.
Once you know how to do it, it is pretty simple to fix. Thank you for the feedback!
@@iwatamedea1I have an iwata neo cn, I have bubbling in the cup but I’ve tried everything to fix it. It only bubbles when I put the needle cap on, can you help me?
@@idofivethings6222 On our website we have a list of common causes for bubbling. Here: www.iwata-airbrush.com/blog/troubleshooting/
I thought I've lost my airbrush forever! Thanks for this! ❤️
Brilliant! I broke a nozzle off a year ago and it would cost more to have it fixed than what I paid for the airbrush. This worked perfect! Thank you.
Thank you for saving my life
You actually saved me… thank you so much.
This really helped I could get the old thread out and put in a new nozzle. Thank you.
Don’t over tighten, or it will break. The nozzle is made of a soft metal and is very delicate!
ca n confirm lol
Why not make it out of hard metal
yep found that out the hard way more then once
@@KenwayTheBonker A good thing to keep in mind is that most airbrush nozzles are manufactured from brass and other soft metals that allow for a better metal to metal connection when threaded into the airbrush. If a harder metal were used it would be more resistant to breakage but would not create a good seal, and this would dramatically affect performance. Because of the nature of the metal, nozzles are subject to wear and tear on all airbrushes, much like tires are subject to wear and tear on a car; but you raise an interesting question. If we do not see cars as defective because we must change the tires and we don’t consider airbrushes defective because we have to replace nozzles occasionally, then how can airbrush users measure quality? Quality can be found in the feel, consistency, and smooth handling. Also, in the longevity of the brushes, which for Iwata, can be decades. With varying preferences, people decide for themselves. To learn more about why airbrush users choose Iwata see us at our Instagram page, iwata_airbrush where user comments tell our story well.
@@iwatamedea1A good analogy since a new nozzle costs as much as a new tire
Thank you! This video was incredibly helpful!!!
Glad it was helpful!
thank you so much. this video is still saving sanity 🙏
Glad that it was helpful. Happy painting!
thanks a real life saver
You are a GENIUS! Thank you! 🙏
Thank you for watching! We intentionally made these QuickTech videos quick and to-the-point. Visually focused, with no language keeps them accessible to people everywhere. We are glad that you found the video helpful!
@@iwatamedea1 very-very helpful, and it was so easy to understand. Great idea from you guys, thank you!
Another reason why Iwata deserves every dollar they make. Saved me from having to throw a perfectly good airbrush casing.
Thank you for the feedback! Almost everything can be fixed
omg i love this video!
THANKYOU SO MUCH
I would've never thought that this was so common that there were videos about it.
Nozzles are delicate little pieces made of various metal alloys. The softer metals create optimal metal to metal seals and are delicate by nature. Meaning, they are subject to wear and tear under normal usage conditions. This is increasingly so when frequent and/ or aggressive cleaning practices are employed. So, it happens. We recommend not over tightening (a common mistake) when placing a new nozzle. Depending on frequency of use and cleaning practices, it is normal to replace a nozzle. Some people experience broken nozzles frequently, others go for years without a replacement. It really depends on all all the variables. We recommend having a spare on hand.
Thanku so so much
Great video! Would of never thought to try this..anyone know part number? I have same NEO..
This happened to me and this works. I won’t use that small wrench that comes with my airbrush ever again though
Sou do Brasil fui eu quem deu assessoria para pessoal da anest Iwata do Brasil, eu amo os aerografos da Iwata um dia queria muito ir ao Japão
What if the brass piece the nozzle screws into is broke? Can't find a replacement piece anywhere
I love you so much, nearly had a panic attack
Glad this video could help!
I broke my tip n I didn’t kno how to take the broken tip off so i took the brass tube where it goes screwed off too n now i need the tip n the tube with threads where can i get it?
BEST VIDEO EVER!! I truly thought my airbrush was toast. THANK YOU ON STEROIDS!!
Iwata airbrushes are meant to last so virtually everything is fixable!
Scalpel didn't work when I tried it, but a dental tool did. Thank you.
Thats how ive done it too
Used a toothpick in the past, but I like the x acto knife idea more...
What if the actual thread inside the airbrush has been damaged. Is it that possible to repair? I think we damaged the thread while removing the broken nozle from the threads inside the airbrush.
So easy. I am ashamed that I did not come up with it.
😅
What’s the red material on the threads of the nozzle
that's an o-ring on that particular nozzle
New nozzle kaise le plz link de do
To find product in Europe info@anest-iwataeu.com
A tooth pick also works!
I just bought mine, and it literally broke while removing for cleaning before use.
I love youtube 😀
Dunno why mine snapped but i thought i had to buy a new one thanks
Airbrush nozzles are made from soft metals so that they form a tight seal that creates the performance needed. Nozzles are considered a wear and tear part like the tires on a car. As a normal expectation, they may need to be replaced from time to time and most people keep a few on hand
common sense would have me try that but if over tightening is the cause chances are an x-acto will not be sufficient
Just drill out the broken peace with a very small drill bit it worked perfect for me.
i actually just used my xacto after over tightening. it works just fine
Then what would be? I still have chunks of the nozzle screw in my airbrush. An X-acto picking away at this just made it so that my nozzle head got all beat up.
Hp-c is so small, it didnt work. Must buy a new one
i had this problem with my CM-B today, i jammed a tooth pick and twisted out
I would have thought with the price tag of IWATA Airbrushes they would have sorted these quite obvious defects that even the cheaper brushes have! To me this just says "made the same as the cheaper Airbrushes".
OVER PRICED OVER RATED.
Thank you for taking the time to comment. Our goal with QuickTech is to give airbrush users solutions to common problems, whether they use Iwata airbrushes or another brands. Broken nozzle threads are an issue that many new users run into when taking apart their airbrushes when they use too much torque when unthreading the nozzle. A good thing to keep in mind is that most airbrush nozzles are manufactured from brass and other soft metals that allow for a better metal to metal connection when threaded into the airbrush. If a harder metal were used it would be more resistant to breakage but would not create a good seal, and this would dramatically affect performance. Because of the nature of the metal, nozzles are subject to wear and tear on all airbrushes, much like tires are subject to wear and tear on a car; but you raise an interesting question. If we do not see cars as defective because we must change the tires and we don’t consider airbrushes defective because we have to replace nozzles occasionally, then how can airbrush users measure quality? Quality can be found in the feel, consistency, and smooth handling. Also, in the longevity of the brushes, which for Iwata, can be decades. With varying preferences, people decide for themselves. To learn more about why airbrush users choose Iwata see us at our Instagram page, iwata_airbrush where user comments tell our story well.
@@iwatamedea1 I agree with Andrew Smith. I've only had the HP-CR a few weeks and already have to replace the nozzle. If it will not turn when the wrench is first used then there is no option but to use more "torque." (And the documentation that comes in the box is poor, proper use of the wrench is not explained, or even it's purpose.)