huge marketing/merch thing you stumbled on at 11:16 in the video. you need a puddin's fab shop coloring book of all the projects. this is something no one else has and lots of adults and kids would enjoy.
Your color change decision on the dash was helpful to see. I have a blue Jeepster that I'm building and my interior will be spice brown, you definitely swayed me from trying any lighter color version for my dash.
Can't say enough about how much I love this build... you need to drive both trucks to some old barn and take some killer photos of those ole' girls . Will you be bringing back the shoebox you were working on &/or do you have other projects lined up for the channel ?
👍👍😎👍👍....... “I recommend rigging’ up ‘lectricity like that..... in a big metal structure.....to absolutely nobody”😳🤣. Take care and thanks for going the extra mile so we can see. Clever lighting 👍
Hi Puddin, Some friendly advise for storing your spare cornell. Remove the shipping blue off the white wall. If you leave it on for an extended period of time it WILL stain the whitewall. I've had it happen to me and is very disappointing.. It is only meant for shipping and short term storage before it is sold and installed. Just thought I would mention it ;)
Does the steering tie rods need to run parallel with the bottom swing arm on a early about 1964 Mustang II front end? This has the single swing arm on the bottom and dual tubular swing arms up top. It's on a pro-street car I bought that has bad bump steer starting at around 20 mph if the road is a bit bumpy. If I feather the throttle very slow it will go fine on the freeway and not bump steer but the second, I hit the throttle hard it wants to pitch the car off the road very violently. Just driving it does not pull and goes straight so very frustrating need to get it figured out and use the car. Took the front coil-overs off and tires then ran the swing arms up and down by hand and the steering wheel went back and forth .
A lot of people use boiled lin seed oil in their patina trucks, I don’t like the shine, I think I’d do a matte clear on my own truck, probably after some phosfuric acid to make it bite
@@PuddinsFabShop ours had dual tanks and if you had full tanks gas would slosh out when you had to stop all over the front tires it was like it driving on ice .
Edna was very lucky you came along n gave her the surgery. I do love your upgrades on her👍
Thanks Buckeye!
Can't wait to see the new interior. With all you've done up to this point, we know it's gonna be nice.
I’m ready too!
Subbed a few months ago, been watching this build series from the beginning. You really put a lot of heart and soul into this project. Great work!
huge marketing/merch thing you stumbled on at 11:16 in the video.
you need a puddin's fab shop coloring book of all the projects.
this is something no one else has and lots of adults and kids would enjoy.
If ya liked Detroit Axial's rack & pinion, you'll LOVE, their Stainless Steel drilled/slotted rotors and loaded (ceramic pad) calipers
Your color change decision on the dash was helpful to see. I have a blue Jeepster that I'm building and my interior will be spice brown, you definitely swayed me from trying any lighter color version for my dash.
I’m glad it helped!!
It's still coming along nicely 👍👍🇨🇱
Thanks Shane!
Coming along nicely
Enjoyed, thanks for the update.
Progress is progress whether it's a little or a lot, it all has to be done.
Yes sir!!
Sweet patina looks cool
You sent that tap for sure! Good job we certainly did enjoy the video!!!
I always send them! Lol
Such a fun series of this build. Your work is beautiful. You get better and better!
Looking better every video! Keep up the great work and thanks for sharing!
Will do!!
Can't say enough about how much I love this build... you need to drive both trucks to some old barn and take some killer photos of those ole' girls .
Will you be bringing back the shoebox you were working on &/or do you have other projects lined up for the channel ?
I definitely will!!
I bought those exact bags for my half ton. The 3rd time i went to air them up one had busted from top to bottom. Hope you had better luck with them.
Coming good man....keep it up!
Thanks!
looks great! I have a lot of videos to catch up on looks like, take care and stay safe!
Well get to catching up!
Looking great!
Thank you!
Looking forward to patina sauce vid👍
Me too!!
👍👍😎👍👍....... “I recommend rigging’ up ‘lectricity like that..... in a big metal structure.....to absolutely nobody”😳🤣. Take care and thanks for going the extra mile so we can see. Clever lighting 👍
😂😂thanks for the support as always!
I like that brown leather for the seats!
Hi Puddin, Some friendly advise for storing your spare cornell. Remove the shipping blue off the white wall. If you leave it on for an extended period of time it WILL stain the whitewall. I've had it happen to me and is very disappointing.. It is only meant for shipping and short term storage before it is sold and installed. Just thought I would mention it ;)
Hey thanks! I’ll clean that this morning!
That dark colour on the dash is sweet, it's giving me ideas for my F100 build. Looking forward to the next vid bud
Awesome!!!
getting there!
your gonna have to start wiring pretty soon. keep it up, nice job
The wiring almost sounds relaxing at this point!
You got a baby diarrhea brown going on there.. LOL The expresso will look great with that vinyl. I wanna see how your vintage air vents work out.
😂😂 ya I like the more adult darker solid poop brown cooler myself.
Love it
Does the steering tie rods need to run parallel with the bottom swing arm on a early about 1964 Mustang II front end? This has the single swing arm on the bottom and dual tubular swing arms up top. It's on a pro-street car I bought that has bad bump steer starting at around 20 mph if the road is a bit bumpy. If I feather the throttle very slow it will go fine on the freeway and not bump steer but the second, I hit the throttle hard it wants to pitch the car off the road very violently. Just driving it does not pull and goes straight so very frustrating need to get it figured out and use the car. Took the front coil-overs off and tires then ran the swing arms up and down by hand and the steering wheel went back and forth .
👍
Good video.
Follow you instincts and it will turn out amazing
Seems like solid core would be a more permanent solution than zip ties for something up in the dash.
A lot of people use boiled lin seed oil in their patina trucks, I don’t like the shine, I think I’d do a matte clear on my own truck, probably after some phosfuric acid to make it bite
I like the shine. But don’t want overly shiny. This darkens it more or less
Sweet petunia debut
Im putting those Air Lift air bags in my Ram 1500. I work not for from their facility in Michigan.
Sweet
Just ordered sweet patina but it didn’t have a section for the promo code.
I buy my tires online at Walmart now, up here they are cheaper than anywhere else, even for the Michelin’s XPS’s I run on my truck
I buy most off eBay.
Yes I would use zip ties.
I like them!
That PBR @ 7:20!
I my opinion the cosmetic choices are always the hardest.
Definitely!
watching this after his latest episodes he has totally changed his act
🤪👍👍
She looks badass
Thanks buddy!
Does the travel all have the dual gas tanks just behind front wheels?
I believe some do. Mine had a single tank on the passenger side.
@@PuddinsFabShop ours had dual tanks and if you had full tanks gas would slosh out when you had to stop all over the front tires it was like it driving on ice .
Haha well I’m glad mines relocated!
🤙🤙🤙💪💪💪
👊🏻👊🏻
"Torque it to sonofab..." Haha!
👊🏻👊🏻👊🏻😂
It’s needs to be flatter to like the new cars
I guess I haven’t paid attention to newer cars.
You should watch the Johnathan W channel, he does a faux Burle wood technique he calls dog crap, as a joke of course
😂
Hey Puddin
Hey!
What I’m the peanut brittle!!
Made my teeth hurt just looking at it.
Torque it to son of a bitch!! Lmao! Thanks I needed that!!
😂😂😂
What's the conversion from "Tighten to Son of a bitch" to how many "ugga duggas?" lol
😂😂
The first brown on the dash is what I would call baby poo Brown It looks like 💩
👍
👍
👊🏻
👍
👊🏻