Rewaco RF1 ST rear bushes
Vložit
- čas přidán 2. 07. 2024
- Hi Guys,
Here we have a Rewaco RF1 ST trike, the rear upper and lower wishbone bushes were seriously worn causing a lot of play. I show you how I replaced them, it was a reasonably straight forward job, I enjoyed doing them and I hope you enjoy the video!
www.melsmotors.co.uk - Auta a dopravní prostředky
you made that look easy using the G clamp to press that in, I did this on the ground with a mate and it took 2 hours on one side, wish we thought of using a G clamp. the first side went on no problem in about 30 to 45 minutes to strip and replace giving us false hope but the 2nd side just refused to play ball.
in regards to you getting more and more trikes in, the increase in trikes is most likely due to these videos and possibly because our group BTW UK (Brothers of the Third Wheel UK) has advertised your garage as a place that can work on rewaco trikes, not many places will take on work with a rewaco trikes due to their size and their not common. there will most likely be a lot more work coming your way in future as there is 8 rewaco trikes in our local group Area 23 but over 100 in our organisation so hopefully you dont mind getting the work in :) great video Mel
Is there anything with wheels you don't work on? Enjoyed the video and WORK SAFE OUT THERE! Impressive shop you have there.
Many thanks
Colin
I am very grateful that you answered. Go out to me and try my best to help. Because I am passionate about these Revap tricycles. And I'm trying to build it. I am a dream. It's a dream. I've been trying to do it for many years now, but I just have to build it. So I wanted to copy the chassis and get some ideas from the rival's chassis. And we see the photos of the rival being filmed, but he has a fairing. Then it gets difficult. We have an idea. A maintenance that you were doing. I even took some pictures of a view from below and so on. But It's too weak for
Hi I've just stripped out my wish bones, as per the ST 1 my outer bushes are shot, where did you source the replacement bushes.
cheers
Col.
Hi Colin, not sure where you're based, but I sourced these from the UK importer, www.thetrikeguy.co.uk/
Hope this helps 😊👍
@@melsmotors hi many thanks for the reply I tried the trike guy bearing in mind I’m only doing one side the 2 outer bushes top and bottom and they quoted me £180 inc delivery, so half what you had in your video, but on their parts sheet they’re listed as a Ford part.
Many
liking your you tube video’s
Cheers
Col
@@colinlovelock6616 I paid around £200 or so for a full set, upper and lower bushes for both sides, these are all different, so I wouldn't assume they're all the same.
Hi, I'm a follower of your videos. I'm in Brazil and I intend to make a trike taking some ideas from the Rewaco trike chassis. Could you please help me? I need some photos of the Rewaco chassis without the fiber fairings. can you help me.

Hi, thanks for watching, please fill out this form and I'll see what I can do for you! melsmotors.co.uk/contact-us/
I'm sorry for not being fluent in English. They're using a translator. To communicate with you. I don't want to thank you very much.