How To Use Infrared Remote using Arduino - New Method
Vložit
- čas přidán 7. 09. 2024
- In this tutorial video, I'll introduce you to a new method about How To Use Infrared Remote with Arduino. I'll guide you through the quick setup of an Arduino IR remote control system to operate an LED. Additionally, I'll demonstrate how to replace a damaged key on your remote and register a new one without any code modifications. What's more, you can even register an entirely new remote control with the project if needed. The best part? You can effortlessly expand this project to control multiple LEDs or high-voltage devices using relays, all without making any code changes!
Join me in this user-friendly tutorial, where I'll provide step-by-step instructions and share valuable tips. Start enhancing your remote control capabilities with Arduino today.
--------------------------------------------------------------------------------------------------------------------
Components: Affiliate Links
--------------------------------------------------------------------------------------------------------------------
1. Arduino UNO - amzn.to/3ZWKAz2
2. 38kHz IR Receiver - amzn.to/3O8naDV
3. IR Remote Control - amzn.to/3YJVh7a
4. LEDs with 1k resistors
5. Relay module
6. Push button
7. Breadboard
8. Jumper Wires
--------------------------------------------------------------------------------------------------------------------
Software Used in This Project:
--------------------------------------------------------------------------------------------------------------------
1. Arduino IDE
2. IR Remote Library
--------------------------------------------------------------------------------------------------------------------
Useful Video Links
--------------------------------------------------------------------------------------------------------------------
Home Automation Using ESP32 IR Remote and Blynk
• Home Automation Using ...
Arduino IR Remote Control LED | Arduino IR Receiver
• Arduino IR Remote Cont...
ATtiny85 Relay Control with IR Remote
• ATtiny85 Relay Control...
--------------------------------------------------------------------------------------------------------------------
Social Media Links
--------------------------------------------------------------------------------------------------------------------
GitHub:
github.com/ahm...
CZcams:
www.youtube.co...
--------------------------------------------------------------------------------------------------------------------
Download Code
--------------------------------------------------------------------------------------------------------------------
github.com/ahm...
--------------------------------------------------------------------------------------------------------------------
Disclaimer
--------------------------------------------------------------------------------------------------------------------
Disclaimer: All videos are for educational purposes and use them wisely. Any video may have a slight mistake, please take decisions based on your research. This video is not forcing anything on you.
Warning: I will use High Voltages which if incorrectly or improperly used could result in serious injuries or death. So be careful of what you are doing because I will take no responsibility for any of your actions.
#Arduino #IRremote #ArduinoTutorials
Thank you for the video and code. It worked perfectly.
Hello Ahmed Khan
This program, like the previous programs, is excellent and practical
I am waiting for the program code link
Thank you very much
so nice of you
Assalaam Alaikum Ahmad sir,thanks for the very usefull project,due to limited movement as i m a cancer patient this will help me a lot, ALLAH bless u with all good thing in life. i simple request ,if u can add code to switch off all four relay with one remote botton. thanks
Thank you for a very useful Arduino project!!
thanks
A brilliantly simple process clearly explained and demonstrated. Thanks. (sub'd)
realy very nice
Nice tutorial this project make RF remote control
Super project goodjob
Hello, my good friend, thank you for all the valuable projects you designed with Arduino. If we want to make a 4 relay controller with 433 MHz remote control receiver and Arduino, we can save the codes with the back push of the button and save the codes with another push of the button. delete it, can you put the codes please?
That's great 👍 very informative tutorial.
thanks
Very unique project sir, please also share my request project version 5.
Again, great video, clear and easy to follow. One quick question if I may: I know probably the Attiny85 has limited resources for this project. Which mcu you will recommend in order to satisfied this project?.... The Arduino uno mcu is overkill and it's size is too. I would like to use a standalone mcu in order to make it compact. The reason for my question.. thanks again and great job.
thanks. you can use ATmega328p instead of arduino. or else you can use arduino nano or arduino micro. If you need wifi connectivity then esp8266 is good option
thank you verry good i learn from you!!
Thank you
👍👍👍
Thanks. I have made a home automation project using the same technique. Here is the link. czcams.com/video/V3FjP0ARuBI/video.html
Great project, thank you. I have a question, I tested the code but it only works with one LED. If I expand to four LEDs as described in the video then nothing works. What am I doing wrong? And can you change the code so that the IR signal is only present for as long as the LED lights up?
Thanks for this great video. how can we control let say 30 leds by using this remote?
Sir program uploading problem😢
How to solve it ?
give me some more detail
Thank you for the amazing videos, I got a problem, when I press the config button the builtin led dosent blink, please I need your advice
Good🙋♂️👍very good my friend
thanks
great video
May Allah reward you abundantly ❤
Nice project, more add Bluetooth hco5 opretion
thanks. will try soon
thanks bro its work but eeproom not work last state when power restore all always on
Super
Thanks
How can I have a button to have all the leds on and another button to have all the leds off? thanks for helping
very nice sir.
thanks
Good project
Thanks. I have made a home automation project using the same technique. Here is the link. czcams.com/video/V3FjP0ARuBI/video.html
awsome as always
thanks
@@AhmadLogs Please, my friend, I want to get a code. I have been waiting for you for a long time, for you to respond to me, and you did not respond, please.Please, my friend, I want to get a code. I have been waiting for you for a long time, for you to respond to me, and you did not respond, please.
Add this project hc05 Bluetooth registration
Hi everybody.
I'm currently having a problem and need your help:
When receiving the remote's external signal, the VS1838B module only displays 0xFFFFFFFF
How to fix it?
Thank you
Sorry that my English is quite bad
Thanks, but mine only works with one LED. Or it doesn't work. Like when I press the config button, it blinks, then when I press a key in my remote, the light on the Arduino shuts completely, and does nothing, can you please fix this?
Молодец ! 👍💥
thanks
How can I make a gps with esp8266 and sim800l but that the data is uploaded to firebase and not by SMS
not possible with sim800l, you need 4g gsm module to work with firevbase
Ahmad Logs do this using an external EEPROM, not the Arduino EEPROM, thanks for the video I really like your channel
I'm glad you enjoyed the video, and I appreciate your feedback! can you please give me some more detail about your suggestion
@@AhmadLogs Instead of using the Arduino memory, use this Modulo Memoria EPROM At24c256 I2c to save the code of the button that was chosen in the control
@@deathnote7943 My question is that, eeprom is enough to store the entire keys of the remote control then why we use other hardware such as At24c256?
@@AhmadLogs the electronic garage door has hardware with an external memory, which saves and compares the signal sent by the control, the idea is to use this same logic, having a record button to send the control code of the key that was pressed to an external memory At24c256, suppose that key 3 of any control was stored, if key 2 is pressed, the code goes to the external memory At24c256 and checks if there is the code for this key, if there is nothing, it does nothing, and if an output is turned on or off on arduino
@@deathnote7943 ok it is great for staring. I have very little knowledge about the external eeprom. I will try to work on this project soon.
Hello Ahmad, a quick question if I may please: Do you know how much eeprom memory will take to store just 2 buttons? I have a remote with 2 buttons and I was wondering if I will be able to store the program and the 2 buttons in a attiny85 mcu. Trying to make it compact. Let me know if is it possible please. Thank you for your videos, I enjoy learning with them. Best regards....
The ATtiny85 microcontroller features 8KB of program memory, which should be more than sufficient for the program you are discussing. Additionally, its EEPROM has a capacity of 512 bytes, providing enough space for data storage.
For each button hex code, you only require 4 bytes in the EEPROM. As a result, you can comfortably store "512/4=128" (128) button hex codes within the EEPROM of the ATtiny85. This allows for a significant number of button configurations to be accommodated in the microcontroller's memory.
@@AhmadLogs Thank you very much for your reply.... I see great potential the projects you bring in combination with the attiny85, very useful and practical.... Again thanks for bringing those real life solution's.....
Add the power failed eeprom state update
you to control 4 relays; You used the TV remote control; Please use 433 MHz radio remote control and RC switch library instead
I suggest you to watch this czcams.com/video/V3FjP0ARuBI/video.html
ESP32 SIM800L GPS Tracker | Vehicle Tracking System using ESP32
THE PROJECT NOT WROK FOR ME PLEASE HELP
tell me the issue. also comment below the video you have issues with
@@AhmadLogs when send get location the message show in serial monitre but sim800l not send location
When using 4 leds, don't you need 4 buttons for registration
I Am Arshad Khan From KPK Mardan.
Dear Ahmed Khan
Please Make A Display
Moon Rise Moon Set Time..
That Are Not Available In Internet Nor CZcams.
can you give me some more detail about the project
Do you have E-Mail for Contact ?
Code Pls Sir
uploaded. I have made a home automation project using the same technique. Here is the link. czcams.com/video/V3FjP0ARuBI/video.html
Where is the code download link
check description. I have made a home automation project using the same technique. Here is the link. czcams.com/video/V3FjP0ARuBI/video.html
👃👃👃
Hello, my good friend, thank you for all the valuable projects you designed with Arduino. If we want to make a 4 relay controller with 433 MHz remote control receiver and Arduino, we can save the codes with the back push of the button and save the codes with another push of the button. delete it, can you put the codes please?
Yes, you can
Hello, my good friend, thank you for all the valuable projects you designed with Arduino. If we want to make a 4 relay controller with 433 MHz remote control receiver and Arduino, we can save the codes with the back push of the button and save the codes with another push of the button. delete it, can you put the codes please?
not understand. please give me clear instructions what you want to do.
@@AhmadLogs hi🙋♂️Let's do the same project you made with a 433 MHz remote control
@@eerrfanshayyestehh2069 I will try. can you suggest me some best 433mhz receiver module compatible with arduino.
@@AhmadLogs Bravo ; My good friend ; Relay control project with radio remote control and receiver; It is excellent and professional