How To Replace 2013 - 2017 Ford Fusion Key Fob Battery - Change Replacement Remote Fob Batteries
Vložit
- čas přidán 28. 08. 2022
- A DIY video tutorial on how to replace the remote key fob battery for a 2013 - 2017 Ford Fusion. You will need to open the Ford Fusion remote key fob case In order to change the key fob battery.
Replacement CR2032 batteries for your Ford Fusion key fob can be purchased here amzn.to/3GDTLvW
This Ford Fusion remote key fob is:
FCC ID: N5F-A08TAA, N5FA08TAA
IC: 3248-A08TAA
Frequency 315 Mhz
This video tutorial will show you how to change the replacement remote fob key battery on the following Ford models:
2013 Ford Fusion
2014 Ford Fusion
2015 Ford Fusion
2016 Ford Fusion
2017 Ford Fusion
Free keyless entry remote key fob programming instructions available at www.ProgramYourRemote.com/
Free Ignition key programming procedures available at www.ProgramAutoKeys.com/
Find a Locksmith in your area with www.LocateALocksmith.com - Auta a dopravní prostředky
No way! My car has been saying my key has a low battery for months, came across this and happened to have an extra battery and was able to replace it in 60 seconds because of you. Thanks!
You're welcome! Glad it helped
@@PYR-Autois this for a 2014 ford fusion also
Thank you so much! Requested to have my battery "replaced" while in for a service at Ford dealership. Low battery indicator came back on two days later. So I'm doing this myself.
You're Welcome!
Saved me. Thank you. Small videos like this helps so much in everyday life.
Glad it helped!
i dont have a car but thanks
You're Welcome!
Lol
Best comment 😅
Thank you! All the other videos I found (including oe from a repair shop) just glossed over putting the screwdriver in the notch without actually showing where to find the notch. (They just showed the fob with the word "Ford" side up and the screwdriver going into what simply looked like the side of the key fob!) I was so afraid I would break it (because I had no clue where this "notch" was and only saw the seam where the two sides come together) that I was about to give up. Then, fortunately, I found your video, and was able to confidently change the battery in less than a minute!
Great! Glad it helped
This helped me a lot. The car kept saying the battery on the key was really low and I didn’t know how to change it so I went to youtube. Great video btw
Thanks! Glad it helped
Great video. I was only able to find one other video for this and that video made it look like the notches were on the opposite side of where the key goes when it is folded down into place. Once I saw your video, I was able to open my key fob in just a couple seconds. Thanks for the great video.
You're Welcome! Glad it helped
Got my car almost 2 weeks ago and suddenly both key batteries died at the same time this helped so much thank you !!!!!
You're Welcome!
Quick and to the point. Thank you
You're Welcome!
Such a very simple technique. It's not like everyone knows these, including me of course. So thank you very much!
You're Welcome! Glad it helped
That is exactly what I needed, and short and to the point thanks
You're Welcome! Glad it helped
Thank you for this guide! Quick and to the point.
You're Welcome!
Very exact and to the point. Took no time.
Glad it helped!
Thanks for making this video, it helped me out
You're Welcome! Glad it helped!
Very Helpful - THX!!😀
You're Welcome!
You're awesome👍
thank you very much, it worked I am happy.!!!!!!
You're Welcome! Glad it helped
Thank you!
You're welcome!
Thanks!
Thank You so much! We really appreciate it
Thank you!!
You're Welcome!
Once again, CZcams for the win!
Awesome - AND I had a 2032 lying around! Almost got 10 years out of the OEM battery...
Nice!
Thank you
You're Welcome!
Thank-you! It was so easy once I watched you do it.
You're Welcome! Glad it helped
Yazzzzz Thank you!!!!
You're Welcome!
Thank you for this video. I replaced my battery but now my car is not registering my key. I could not remotely unlock or unlock it now is there any way to fix this? I have to use the side code to enter the vehicle now.
I would double check to make sure the battery is good and installed properly
Thanks handsome
I like welcome to program your remote better
I will keep that in mind!
How do you reconnect the fob to the car after?
it does not require programming after just changing the battery
Can we use cr 2016. Instead
no
Is this for a 2014 ford fusion
yes
Does it need to be reprogrammed?
No - it should not need to be reprogrammed after just changing the battery
@@PYR-Auto thank you
So… um… really dumb honest question from someone who knows next to nothing about cars: so I replace my battery and it’ll just work again? There’s no switch that needs to be flipped (like when they change the oil) or repairing? (like with the old school remote starters, when you put a new battery in, there’s something you had to do to re-pair it)
Thank you for this video, I’ve been terrified by the warning of low battery and panicking on what to do. I didn’t want to break my key fob!!!!!!
There is no reprogramming needed after changing the fob battery. It may take driving the car a few times before the fob battery warning light goes off
Why in the world did I have to watch a video to change a battery? Thanks for making this. Ford has poor design on every step of the way for this car!
Mine only works with the new battery if the back cover is off. As soon as I put it on it stops working. Technology hates me 🫠
interesting - I have not experienced that that
Thank you!
You're welcome!
Thanks!
You're Welcome!
Thank you
You're Welcome!
Thank you!
You're welcome!