Classic Mini DIY - Carb Install(HIF44)
Vložit
- čas přidán 26. 08. 2016
- Detailed explanation showing how to install a new carburetor on your classic mini. In this video we will be installing an HIF44 carb on a 1275cc movie.
Kit:
www.7ENT.com/products/hif6-hif...
This is the Seven Enterprise HIF44 carb kit. Comes with the following items:
HIF Carb
K&N Air Filter
Intake Manifold
Manifold Gasket
Accelerator Cable
Accelerator Cable Clip Thanks for watching Classic Mini DIY! Please note Classic Mini DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Classic Mini DIY recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Classic Mini DIY, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Classic Mini DIY. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad. - Auta a dopravní prostředky
Fantastic. Just got a hif 44 and was wondering what all the tubes were. Excellent!
the overflow doesn't "stay open", you at least need to run a pipe off it to somewhere out of the engine bay so if it does start pouring fuel its not going to go directly onto the exhaust manifold and start a fire
Looking forward to your vid on tuning. Great info. Thanks.
Glad to help! Will be coming up in about a week or so.
Hello, do you know where i can find the orange caps you have on the intake pipe ? Thank you
Cant Wait for the next video haha, I have a brand new hs4 on my 998 and i have trouble tuning it, I was lifting the piston way too high to tune it, I have now learnt better, but im still not 100%
The new video will be going live this afternoon. :-) Lifting the piston? You shouldn't need to do anything with the pistons when tuning the carb.
Where can I buy those bonnet hinges from. They are mad
I wish to add a charcoal canister to my 1967 Cooper S to reduce the smell of gasoline while parked in my garage. The canister requires a source of vacuum. Do you think there is a port on this carb that could accommodate it? Thanks. Great informative videos!
sorry, where did yo buy this Carb Abutment Bracket? i need one, but i havent found one so complete! thanks and good proyect!!
Hola. Me podes decir cual es la diferencia entre SU 44 y HIF 44. Otra pregunta es si son nuevos y quien los vende. Gracias.
Hello! I got my brothers 87 mini into my garage and i am just about to explore all its miracles. What is with the connection of the fuel breather? Is there a certain way to connect it? On my project, there is a hose on the breather, that leads all down to the bottom. But when i close the breather, the engine stalls. So i assume it needs to be open. Am i right? The dude who took "care" about the car before was a little bit out of his mind and did some really weird stuff.
The accelerator / throttle lever has a return spring between the carb and lever, it has a lot of tension so much tension in fact that it requires quite a lot of pushing of the accelerator pedal on my 1994 mini.. The extra spring at 13:07 I don`t mean that one as I have fitted one to mine that`s a bit lighter. At 6:10 when you open the accelerator lever in your video one notices the tension and to be honest is there a spring one can purchase that is much lighter as the tension is way to much for that lever and it shouldn`t be..
Hi, great and helpful video. Were du you fing The plugs that you have on your carb and manifold?
The little rubber hole covers? They came with the carb when I bought it.
I've just installed a HIF44 + K&N filter into my mk1.. wondering what you used to cover the center firewall hole behind the binnacle? The induction noise is just a bit too loud for me.
any videos on su hs6?
do you have an issue with the carb hitting the firewall? I need a fix for my one. I've even removed the spacer.
I did initially. I had to use a smaller spacer, get an adjustable engine steady to kind of push the motor forward a bit and then I think I did some knocking on the firewall to make it fit.
I wish you fix my HS4 Carburator LZX1111B Classic Austin Mini SU HS4 wax stat retro fit replacement I need to install i don’t know nothing about mechanic I working Construction
I have a 1992 Mini Cooper (Rover) it has the original carb and I would like to make a change in favour of performance. Any recommendations ?
I think that carb is an HS4 already, on that year. (Might be wrong about that) The HS4 and the HIF38 are really similar and probably wouldn't get much performance gain out of it. I would probably look at the HIF44 if you are looking to upgrade the carb. I don't think you will see a HUGE increase in performance though.
you need a "GUNSON Colortune" for a precise cab tune.
I have another video on the use of that tool. It’s awesome for setting the idle mixture but won’t tune across the whole power band unfortunately.
@@classicminidiy
True. i like your channel. as I did all that as a youth. had many road and race minis for the past 45 years. I had known David Vizard personally. keep up the good work.
Hi Cole,
Where did you get that orange blocker? I live in California. No issues freezing my carb unit here. Thanks!
BTW I just upgraded my suspension and shock by myself with the help of your vids and supports from my local mini shop- Heritage Garage
I'm so glad the videos helped with the shock install. :-) The blockers were included in the kit from 7ent. If you are in Cali you should give them a call. They might post you some for a few bucks if you ask nicely.
Can I ask why you went from a twin carb setup to a single? I have a hs4 carb on my mini 1000 atm but have got a twin set of hs2’s to put on.
I just got tired of keeping the duals tuned and synchronized. At the time I also wanted to try something new. Dealing with one is generally easier though.
Hey, i'm thinking of replacing my standard air box with a k&n pancake or cone filter, mainly because i want a loud screamy engine noise, will it make alot of difference? and which one would you recommend? thanks
I like the honesty around noise hahaha. You will definitely see a difference it's nothing like putting a big open intake on a turbo car but you will certainly hear more air. I have had both the pancake and the k&n cone types and I vastly prefer the cone filter and it is, in my opinion, louder than the pancake one. Not to mention they can be removed, cleaned, and reused.
@@classicminidiy I've read somewhere that you need to replace your needle if you put a k&n air filter on your carb. Is that true? I would only adjust the fuel mixture again...
Hello, could you help me with a question? I have an austin mini, with a 1380 engine, it is coco or kit to reach this displacement, so I bought it, it has 1 only 1 1/4 Su carburettor, the question is will it improve performance if I put a SU 1 3/4 carburettor .?
I think it will. A bigger carb does not mean more power but every carb size has a range of power output of the engine in which it works well. That means that your carb can cause the engine to get less mixture than it can take so it causes less power. images.app.goo.gl/YwziMYmsGFZrxm3N6
This graphic shows it.
I want a performance carb for my mini 1000, can you give me some names? Thanks love your vids
Hey! I would guess you probably have a single HS2 on there now. My recommendation would be an upgrade to a single HS4. Nice big carb with good flow. You could also go to a dual HS2 setup but honestly a single HS4 will be easier to work on. Link below:
www.7ent.com/products/hs4-carb-single-850-to-1275cc-sie0025.html?af=cmdiy1959
hi... I just bought a hif44, and changed my 850 engine to a 1300... do I have to upgrade the fuel pump as well? Or do the 850's pump work? Thanks
I would recommend updating the pump at the same time. Minispares sells a suitable HIF44 electric fuel pump which works great. Made by a company called Facet
@@classicminidiy hey, thanks for your quick answer!!! And what do you think about the AZX 1817 mechanical pump?
I see you have red rubber caps on the sides of the intake manifold, is there a reason for those? Mine are just open. Thanks!
I just liked how it looked with the plugs on it. Made it look more "finished" to me, but they arent required. :-)
Awesome, thanks! I just got my car a few weeks ago and your videos and your website have been a big help.
Nice vid as always, what are you doing with your old carbs?
I will probably hold onto them. They were solid carbs and working when I took them off. I might do a video on how to clean your carbs really well with them. Then I will have a set of working clean carbs! :-)
Always good to keep original parts with the car if you can.
Is it ok if you can put a link on your next video about your sponsored website?
I usually include a link in the description but the company who sponsors the channel is Seven Enterprises www.7ent.com
Classic Mini DIY Ok thank you!
I don't think that the statement on the overflow pipe is correct... that is not an overflow as far as i` am aware as there is vacuum on it ...its needed for the piston inside /atmospheric air
What would you recommend for a 998? Would a HIF38 be more suitable?
Yeah that would probably be solid for the 998.
Either that or an Hs4
www.7ent.com/products/hs4-carb-single-850-to-1275cc-sie0025.html
thanks
Where can I buy the intake adapter for the pcv valve?
www.7ent.com/products/fitting-intake-manifold-12h1405.html?af=cmdiy1959
Thank you. I appreciate the prompt response.
"The SU is internal" ??? " The looser that screw is " ??? Warm manifold with phenolic (insulating) spacer ,keeps carb warm ?? " Little adaptor" is a quadrant ...
what model mini do you have?
Mine reads Morris Cooper on the back but I don't think they actually made the Morris Cooper in 60. Most likely a Morris 850 originally.
I guess you’re using a black spacer between carburetor and manifold: may I ask you why?
That spacer is required for the HIF44 due to the throttle lever and the clearance required. Without the spacer the lever intersects with the manifold and does not actuate properly.
Classic Mini DIY Alex Pi
Very kind of you. And let me also thank you for your videos: I’ve learned so much about my Mini watching them! Cheers from Italy!
Que veux dire mini diy?
C'est un acronyme pour "Classic Mini do it yourself" faites-le vous-même. Je ne sais pas si cela se traduit directement en français.
SU aka Skinners Union
I have heard this before but what does it mean? :-)
Skinners union is a brand of carburettor en.m.wikipedia.org/wiki/SU_Carburettor
Had no idea that’s what SU stood for. TIL
Well you have learnt something new today
Yo no cacho inglés
Lamento escuchar eso.