Foam Fabricating a Mr Knight Mask
Vložit
- čas přidán 7. 04. 2022
- When your superhero has multiple personalities, which one do you start with first? In Disney's new Marvel series Moon Knight, I decided to start with the dapperly dressed Mr. Knight alter ego. For this build, I used: 6 mm EVA foam, 10 mm EVA half dowels, contact cement, Mod Podge, super glue, Plasti Dip, and some Plaid FX acrylic paints. You may also need the following tools: a heat gun, a Dremel with various bits, a wood burner, and an Exacto knife or box cutter. Let me know in the comments below if you would like to see more like this one, from shows, video games, or whatever. Please smack that like button, dropkick subscribe, and share with as many people as possible.
AMAZON AFFILIATE LINK
This link brings you to my Amazon shop page, a portion of your purchase through this link helps out my channel. I have put some of the products and tools that I use in my videos on here, hopefully, this makes it easier for you to buy similar materials for your builds:
www.amazon.com/shop/muchprops
MUCH PROPS MERCH
Show your support for the channel and get your Much Props gear today. Your purchase helps me to continue putting out content:
teespring.com/stores/much-props-merch
You can follow me on the following social media sites to get updates on projects I am working on:
PATREON
/ muchpropsstudios
FACEBOOK
/ much.props
INSTAGRAM
/ muchprops
TWITTER
/ muchpropsstudio
TIKTOK
/ muchprops
ETSY
www.etsy.com/shop/MuchPropsSt...
TEMPLATE
static1.squarespace.com/stati... - Jak na to + styl
![SIFU: Moon Knight Brutal Combat & New Modded Moves in Arena Mode [4K 60FPS Cinematic Style]](/img/n.gif)
Enough watching it is TIME TO BUILD!!!!!!!!!!
Agreed. Get busy and let me see what you come up with.
great build. thanks I used some sand in black gesso to give me a nice fabric texture and then painted it.
Smart idea. Thanks for sharing
So thankful for this template. I made a few mistakes because angels are hard, but the finished mask looked great in pictures.
Glad I could help
Was literally thinking as soon as that reveal hit that a Miss Knight would be so cool to do. Thanks for making it all that much easier to follow through on the thought!
Glad I could help. If you're gonna use the template you will definitely need to scale it down. My head is 24 inches around my forehead
@@MuchProps Thanks 😊 I've had to scale your templates down before so all good there!
It might be a little while as I'm halfway through a saiyan armour set and hoping to do a hylian shield after it but I think this might be a quick fun one so maybe for Halloween 🎃 😁
great build, i have used a few of your patterns in the past. they are easy to follow and well marked. this one could also be used as a good base for other characters
Already have one built and working on another iteration today. This pattern will definitely be put through its paces.
Very nice! Now I'm all caught up again. Yes, I can see this being an awesome template for many many things to come. Thanks, Thomas!
Just wait until you see the next hero
Made one for my neice, then I had to make one for me!
Glad it could help
Awesome build, you really pulled off the skin tight material look. Glad they said D.
I.D when it was probably written when still was MPD.
Glad you enjoyed the build. It is by far the best fitting helmet I have made for sure
Another fantastic build Thomas! I love the way you do your video's, including the fun facts and your great sense of humor! Much love from your fans across the Pond!!!!
I appreciate the positivity. Just having fun doing what I do. Much love and a big howdy from Texas.
I love Friday. LOL you should watch the show it's pretty good. I want to make a khanchu mask. It's big and creepy and would be very cool.
We rotate between the streaming services. It will definitely be on the watch list when Disney is back in the rotation. I'll have to take a look at that mask.
Amazing template. Many thanks for providing it for free!
I only had a problem getting the nose glued to the neck but other then that, very amazing template!
Let me know how it turns out. Tag me if you post pics online. Always love seeing the templates put to good use
Pretty awesome base. the trailers for moonknight look crazy.
The premise looks pretty cool
This template will be making another appearance pretty quick
My Mr. Knight costume for this Halloween is ready. I wanted thank you with a photo of the final result, but none of your social media accounts are active. Anyway, Thank you Thomas for the tutorial! Your creations are very creative and amazing.
I don't know why my links are not working. Just go to any social media and search Much Props or Much Props Studios. Would love to see your project
So cool love it 🔥🔥🔥
Thanks 😁 👊
That's so cool man 🔥🔥🔥
Thanks 😁👊
Another across the pond fan here. Wicked build AGAIN Thomas. That is a great template. Not sure what I am going to make with it yet. But will do something 😀 thank you !
Wait til you see what I am working on with it . A good one from the 90s. Hopefully this build gets plenty of use. So many possibilities
I've been searching for this template even before the release of the series 😅. This video is beginner-friendly and so helpful.. and the instructions and the template is so helping.. tysm for this..❤️
You're welcome 😊 hope you have fun with it and let me know how it goes.
Awesome as usual! Thanks Thomas....Now do the fabric wrapped Moon Knight! LOL
I might have to
awesome :D
😁👊
Awesome job buddy!
Thanks my friend
i might reuse the base for a deathstroke mask
Would love to see it
Pretty good for an Aggie fan 🤣🤣 Also the mask looks like it could be Bane from Batman and Robbin
GIG EM. Aggie graduate, class of 2007. This could make a great base for a lot of superheroes and villains.
Marc:Steven What the hell are we wearing???
Steven:I don't know, Go ask Much Props about it
😀 hopefully Marc, Steven and Jake approve. Or at least mind their business cause Mr. Knight is looking dapper
Looks super cool Thomas. I think I'd be claustrophobic in it though. I might have to try making one anyway.
It's not to bad. There is just the tiniest bit of wiggle room in it for me to pop on and off Lots of potential for other uses
@@MuchProps I can definitely see the potential! Lots of ideas churning in my brain
I like this mask, I would love to see a Dr. Doom build
That's a cool one too. The problem with building stuff from the comics/movies/TV is there are way too many to build in my lifetime. Won't stop me from trying though😆
@@MuchProps very true
That came out really cool and clean!
Don’t know if you heard of Creators Con happening in Oklahoma tomorrow. I plan on going and will be sporting my new Much Props tshirt! 👊🏼
Thanks. Appreciate you repping the merch too. Hope you have some fun
very nice! I think I might make this and add some LEDs for the eyes but I think I might change the jawline a bit because his is a bit shorter, otherwise great job!
I build things to fit my head. Sorry it's less accurate than you think it should be.
I always watched on Disney Plus
I need to get caught up on some Disney shows
Great build, the templates crying out to be made in to death stroke
This will be getting a lot of use for sure.
Best Mr Knight mask tutorial I’ve seen so far! Would you sell it?
Thanks. I sell most of my stuff on Etsy. Links are in the description of the video
Rey with this template you can take off the suicide squad helmet to the white red hood
You could make a lot of things with this as the base. I made 3 different builds on this same helmet
Ise this is Mr Kingth but I didn't know what tools you used because I don't have any. I gave myself ideas to finish as you say with many accessories 👊 but I can't match you to KING AS THOMAS 🤝
I was just thinking that this mask could be Night Thrasher (from Marvel comics).
It's a good base for a lot of builds
I'm so glad you did this mask.. I was watching last night thinking "well hopefully one of my favorite prop makers makes a pattern
😁👊 template will be up in the morning
Well done.
Any white spray paint gives me problems, even through an airbrush. I absolutely hate using it. I bought white plasti-dip once cause it was all they had at Home Depot when I needed some. It ruined what I was making.
I buy my Plasti Dip in bulk, and have a case of it that will probably never get used. If you want bubbles and splatter everywhere it would be good for that😄
Brasil perfect
😁👊
Hey man, been looking for Mask template and inspiration and this video is really helpful for my another moon knight project, but i have a question, what size of the paper you used to print the cut out template? is it A4 100% scale? or Letter size? Thanks for the help!
It is standard US letter size 8.5 inches by 11 inches. I tape my templates directly to the copy paper and scan it in. So what you see on the template in 100% scale. My head is 24 inches around at the widest point on my forehead.
@@MuchProps i thought my melon was big LOL
Same
Do you have a problem with the barge cement getting thick over time in the can? If so, have you found a way to thin it?
Because I make so much stuff I never really have that issue. But you can buy contact cement thinner on Amazon too
Hey Awesome video thank you so much! if you have a smaller head where would you recommend that scaling down? I have a 1 inch smaller head than yours.
Maybe just a little. This fits almost perfectly on my head. If you don't want to scale it you could always put soft foam inserts on the inside to make it sit right
This is such a great tutorial! I was wondering if you have any tips for scaling down the template (my head is about 22 inches around the forehead)
Actually, I have a video on how to scale it. Here it is czcams.com/video/rfWS8JNyc18/video.htmlsi=3vBPazoIWd4igHvF
@@MuchProps Thank you so much!!!
What do you think about a cardboard face shell instead of PVA foam. Would it work?
You could try, don't know how well it would work as the template is made in as few pieces as possible. This means it relies on the stretching of the foam to get the curves. To do it in cardboard you would need it more segmented to get the shape.
Do you cut the angled line on just the portion of the edge that you have colored green/blue or the entire edge of that piece. Some of these pieces the colored line doesn't extend the whole edge?
You cut the angles only where the highlights are. Some parts transition the angles to adjust for the shape of the part. I try to make my templates with the fewest pieces possible to keep it simpler.
next can u make ballistic mask?
Thanks for the suggestion.
I would love if you could tell me how to measure my head and size the template
Get a tailors ruler and wrap it around the area that a baseball cap would sit above your ears. Then go to my video on how to scale. czcams.com/video/rfWS8JNyc18/video.html
how would one scale this up? its small on my head plus glasses
I'm just gonna leave this right here.
czcams.com/video/rfWS8JNyc18/video.html
Also how do modifi the template for big heads
My head is pretty big as it is. My head is 24 inches around the forehead. I have a video on scaling, and the mannequin head video that I am releasing right now has so pointers at the end of the build.
What thickness is appropriate for this build
The thickness is mentioned in the video, in the description below the video and on each piece of the template (last link in the description)
Hey man! Really good project!! Just one question about the sizes... How to change Them? Cause after I did the mask it can't fit my head :( what do I measure of my head to then change the measures of the assets? Need help :'(
I got the same problem man i made it and then it was to small to put it on
@@howorginal How you fixed that? I need ti resolve this fast cause i need it
I have a video on resizing. czcams.com/video/rfWS8JNyc18/video.html
Measure around your forehead, mine is 24 inches around. I mentioned you may need to resize it on the cover page of the template as I have a large head
You may try cutting off a little in the opening or you may need to size it up. Here is my resizing tutorial czcams.com/video/rfWS8JNyc18/video.html
¿Bro, how many centímetros did you make the photocopy of ?
Im not quite sure what the question is. The paper is 8.5 inches by 11 inches. At the printed out pattern size, this would fit a 24 inch around head
What percentage do you suggest printing it at for a 22inch head? I did 100, but it's huge on me
Go to the link below and enter it in. The pattern is made to fit me, and my head is 24 inches around at the widest point. Plug in my number and your number and it will give you a percentage. www.cosplayapprentice.com/Cosplay%20Calculators/cosplay-pattern-scaling-calculator
I also have a video about how to scale that you could watch:
czcams.com/video/rfWS8JNyc18/video.html
Yep this is definitely the video I'm doing my kids mask off of. Well see how it turns out. Thanks for that prop calculator too, super helpful.
@@nickkrenn891 glad it was useful. Definitely size that template, I have a ginormous head that would make your child look like a bobblehead if built my size.
@@MuchProps Jokes on you, he already does look like a bobblehead lol jk. Thanks again dude
are you considering on making the batman 2022 cowl?
Anything is possible. 😁👊
Sorry if i sound dumb, but to get the templates do i need to click on the patreon link or the amazon affiliate link?
It's the last link in the description
@@MuchProps alrit appreciate it mate
@@MuchProps is the templates free? Im new to cosplaying so i dont know much
@@csgotrollling4 my templates are always free. If I made and used one for a video it will be linked in the description. Just trying to spread the creativity, free of charge. 😁👊
@@MuchProps damnn keep it up king
Update for the template sir pliss
Template is the last link down in the description
Is the mask breathable?
I would not want to wear it for long periods of time. It is "breathable" because of the eye holes and not being a perfect fit around the jaw and neck
10:05 why don't use sponge?
Didn't have one and I think the technique I used worked fine.
Crack the colors of the templates are the side to cut. The blue is on the left and the green is on the right. Please explain to me VOR🥺🥺🥺😢😢😢😢
Or the blue is right for cutting and the Green is left for cutting 🤔
The cover page for the templat explains what the colors mean. Blue means you need an inward 45 degree angle cut on that edge, green means an out 45 degree cut
Thank you king, right now I finish my Mask. I put my profile on my Google account. thank you very much 👊
what is your size if you dont mind me asking?
My head is 24 inches around at its widest point. I try to put that on the cover page of most of my mask/helmet templates for reference. I'm a pretty big guy, 6'3" and 250 lbs.
can i make it with cardboard?
I dont know that cardboard would bend into shape like you nee it to for this template. Would also be hard to pull over your head unless you made it oversized
@@MuchProps thank for the comment
instead of the mask wrapped in bandages?
This could make a good base for the Moon Knight, just have to overlap it with strips. You could also just buy a cheap Mardi Gras mask and cover it with strips.
Why I can't go to the page of the template
It's a PDF. If you are trying on a phone, tablet or chromebook you may need to download an extension or program in you app store in order to read pdf files
No I mean when I click the said this page isn't available right now
@@user-el7gb3lw4s are you on a computer
No on a phone
@@user-el7gb3lw4s then read my first reply. Your phone probably does not have the ability to open a pdf. Go to you app store on your phone and download a pdf reader. Then you can open it
You always surprise me with every new video, well done👍🔥🔥🔥
😁👊 never a dull Friday for some ideas on creativity