@@jeffr.1219 FT011 😊 I tried with that boat it's seems to like a heavy lipo like 4000mah,ones I had only handled well when I fitted 4082:motor and big 6s lipo
@@paulcooper7162 yes I've seen your videos of it, that's what made me think of it. I let my kid rob parts off it, for his arrow. I mainly run my TFL boats. Been building a few arowanas, seen the ft11 hull sitting there, figured why not? I had a 3450kv 2960 in it at one time, which I ran on 5s 4000mah. Spun the metal shaft, broke the black plastic keeper off the back of transom. That's when it got put on shelf and sat
Hi 👍 I custom made a motor mount for the 3126 2200kv motor outrunner ,made it from the white plastic power board and a spare front mount 36mm motor cooler or can buy a wee motor mount with water cooler superglue in to hull and remove the stock mount and fit a 4mm flex cable and strut if fitting this motor
Everytime I get a boat and do mods I think there has to be somebody else and you always beat me to it lol. I modded mine too but she gets really hot. I need to change the prop. What internals are you running? Idea was a cheap fast roll over boat.
Hi 😊 they seem to get hot so I went for a lower KV motor Mitoot 3126 2200kv outrunner,130A ZTW ESC and 4-6s lipo same setup as my blue rigger.Yes prop size can make or break it
Hi,only things stock are battery mount,trim fins,trim tabs It has a 3126 2200kv Mitoot chrome outrunner much same size as Vector SR80 1750kv silver black motor, Mitoot motor loves 6s voltage
Nice, stable 🤤
Thanks man 😊👍
Looking good buddy. She's stable and fast. Kinda wanted to build a cheap boat, to take on my trip to Alaska lol.
Hi,thanks 😊 ,sure is plenty to choose from
@@paulcooper7162 yes that's for sure. I have a fto11 hull, been thinking about building with some spare parts I have laying around
@@jeffr.1219 FT011 😊 I tried with that boat it's seems to like a heavy lipo like 4000mah,ones I had only handled well when I fitted 4082:motor and big 6s lipo
@@paulcooper7162 yes I've seen your videos of it, that's what made me think of it. I let my kid rob parts off it, for his arrow. I mainly run my TFL boats. Been building a few arowanas, seen the ft11 hull sitting there, figured why not? I had a 3450kv 2960 in it at one time, which I ran on 5s 4000mah. Spun the metal shaft, broke the black plastic keeper off the back of transom. That's when it got put on shelf and sat
@@jeffr.1219 That alot of rpm for 5s.I do like the look of the FT011,mine always took in alot if water and I never could find the reason 😊
Fast little thing!
Thanks Steve 😊 it was good to have calm water at 8.30am,normally always choppy here
Rocket 🚀
Thanks 😊does better on 6s 👍I've been watching out for your vids
@@paulcooper7162 haha, I haven't touched any of my rc's for ages I'm been constantly working on my road car lol, i need to get back out with them
@@iLouieTube I can understand that,RC cars are great fun without the danger of drowning 😊
Hey Paul, did you have to buy a new motor mount or did the motor you bought fit on the existing volantex motor mount?
Hi 👍 I custom made a motor mount for the 3126 2200kv motor outrunner ,made it from the white plastic power board and a spare front mount 36mm motor cooler or can buy a wee motor mount with water cooler superglue in to hull and remove the stock mount and fit a 4mm flex cable and strut if fitting this motor
Everytime I get a boat and do mods I think there has to be somebody else and you always beat me to it lol. I modded mine too but she gets really hot. I need to change the prop. What internals are you running? Idea was a cheap fast roll over boat.
Hi 😊 they seem to get hot so I went for a lower KV motor Mitoot 3126 2200kv outrunner,130A ZTW ESC and 4-6s lipo same setup as my blue rigger.Yes prop size can make or break it
I wan upgrade my sr65 motor to sss 3656 2030kv 6 pole ,fly colour 120a , i run 5/6s lipo can i use 4mm flex shaft? It safe ?
Sounds good,yes 4mm is strong as boat is light ,I only used a small lipo about 1800mah
IS IT ALL STOCK????🤔🤔
Hi,only things stock are battery mount,trim fins,trim tabs It has a 3126 2200kv Mitoot chrome outrunner much same size as Vector SR80 1750kv silver black motor, Mitoot motor loves 6s voltage
4mm or 4.76 shaft ?
4mm 👍