IWI TS-12 vs K. USA Komrad-12

Sdílet
Vložit
  • čas přidán 8. 06. 2022
  • 25 round mag dump through each gun.
  • Zábava

Komentáře • 46

  • @irafowlerjr.7492
    @irafowlerjr.7492 Před 2 lety +1

    real life, work through the jams, like those shotguns. thanks

  • @daveme3582
    @daveme3582 Před 2 lety +1

    Liked how you did a real life comparison between the 2. As a proud owner of a TS12, imo, it lives up to its hype.
    I consider it a working mans AA12 being $2k less than a consumer AA12. Also not trying to jack your demo,
    military arms ch, did a great review highlighting the need to lube a new purchasd ts12 out of biox lube. I understand
    how many folks would be apprehensive to buying this new, clearly mechanically complex, shotgun at around $1.4k
    in today's inflation rich $ of mid 2022.... But I assure all, IMO its worth the added $. While not being Benelli level expensive to boot.

    • @308c
      @308c  Před 2 lety

      Having both the TS-12 and Benelli M4, it's heard to choose which one I'd keep if I could only keep one, but I would most likely choose the TS-12. Here's the video I did comparing them like in this video. czcams.com/video/liOOPj2s-0A/video.html

  • @TheGunsNBlades
    @TheGunsNBlades Před 2 lety +1

    Love my Komrad

  • @Vityaz69
    @Vityaz69 Před 2 lety +1

    I have a vepr 12 but for some reason I'd like to get a komrade as well. I don't really need it but... you know how it is lol.

  • @m.danielmills7091
    @m.danielmills7091 Před rokem +1

    I love the komrad. Hard to beat

  • @mauricecohen3830
    @mauricecohen3830 Před rokem +2

    TS-12 all day

  • @stephanieroberts1394
    @stephanieroberts1394 Před 10 měsíci +1

    I've seen many vids where people have problems with the comrade. What's that about?

    • @308c
      @308c  Před 10 měsíci

      The only reason I had the problems, I did have was because of a buffer I added to it which prevented the bolt for traveling fully to the rear not allowing the rounds to eject properly.

  • @UnstoppableYaris
    @UnstoppableYaris Před 2 lety +1

    I'll take my Tavor TS-12 over any other semi-auto just for the ease of loading while on the go. Get a caddy on each side so you can double feed it when tubes are done..

    • @308c
      @308c  Před 2 lety +2

      I feel like my TS-12 is definitely the go to over my Benelli M4.

    • @UnstoppableYaris
      @UnstoppableYaris Před 2 lety

      @@308c agreed my friend, great video by the way!

  • @stephanieroberts1394
    @stephanieroberts1394 Před 10 měsíci +1

    what was your break in period for your Komrad?

    • @308c
      @308c  Před 10 měsíci

      I add after market parts to mine right out of the box in order for it to shoot light loads better, so I really can't say what it took to brake it in factory.

  • @10MMRUT
    @10MMRUT Před rokem +1

    Hey bro, I’m
    Buying a komrad 12 but the version I see is no where near what yours looks like. Is yours a special model or did you change the hand guard on it? Thank you

    • @308c
      @308c  Před rokem

      I put a new handguard and rail system on mine. I also have a light load kit for shooting cheap birdshot loads.

    • @10MMRUT
      @10MMRUT Před rokem

      @@308c what hand guard is that?

    • @308c
      @308c  Před rokem +1

      @@10MMRUT if ths link doesn't work just Google saiga 12 handguard Monstrum Tactical is where I found one. monstrumtactical.com/saiga-12-20-gauge-shotgun-quad-rail/

  • @m.danielmills7091
    @m.danielmills7091 Před rokem +1

    How are you locking the bolt on the catch so easily on the komrad?

    • @308c
      @308c  Před rokem +1

      I added a bolt hold open lever to it.www.carolinashooterssupply.com/Saiga-12-BHO-Bolt-Hold-Open-Lever-Conversion-p/css-modified-bho.htm

    • @m.danielmills7091
      @m.danielmills7091 Před rokem +1

      @@308c Much appreciated 🙏🏾

    • @308c
      @308c  Před rokem

      @@m.danielmills7091 here is the video I made shooting how to install it. czcams.com/video/LvDANsoB5ng/video.html

    • @m.danielmills7091
      @m.danielmills7091 Před rokem

      @@308c So it requires some modifications to get it installed properly?

    • @308c
      @308c  Před rokem

      @@m.danielmills7091 yes! You have have to make a slot big enough for the level to stick through next to the trigger

  • @markanthony6638
    @markanthony6638 Před 2 lety +1

    It would do justice for these tests if you had a carrier of some sort instead of box loading

    • @308c
      @308c  Před 2 lety

      I am going to get a carrier at some point but I jusk putting it off for other things.

  • @madworld1238
    @madworld1238 Před 2 lety +2

    Ghost load your Ts 12. You get 17 from it.

    • @308c
      @308c  Před 2 lety +1

      I just wanted them to have a even amount because I really wanted to know if loading a mag was fast then loading a fix tube.

  • @jillblake3916
    @jillblake3916 Před 2 lety +1

    Hi sir, this is Jill Blake from a gun gear brand. I am attracted by your performance in YTB and sincerely invite you to make a review video. If you are interested, please leave me your email. Then I will send you some products to see. Looking forward to your early reply.

    • @308c
      @308c  Před 2 lety

      Hi Jill, do you have a website I could check out some of you gear?

    • @jillblake3916
      @jillblake3916 Před 2 lety

      @@308c Here is our store: amzn.to/3M4CnSl

    • @jillblake3916
      @jillblake3916 Před 2 lety

      @@308c Hi sir,
      Are you inteerested in one of them?
      Looking forward to your early reply.

    • @308c
      @308c  Před 2 lety

      @@jillblake3916 I didn't get a website to be able to look at you products.

    • @jillblake3916
      @jillblake3916 Před 2 lety

      @@308c I replied the website to you in the comments section five days ago. Probably blocked by CZcams. Do you have an Instagram? Or contact me by my ins account: