Video není dostupné.
Omlouváme se.
WPL C74 Update 2. RES V3 Installation. 1/10 RC Suzuki Jimny
Vložit
- čas přidán 16. 08. 2024
- After the fire in the original ESC, WPL sent me this replacement.
I thought I'd show you the installation and my initial thoughts about whether you should get one or not. This is, of course, as honest as ever!
If you fancy getting either a C74 Jimny, a RES V3 setup or any other WPL products, I'd advise using the official store. The service and support are great. Please visit their store using this link as any purchases will give me a tiny commission to help keep the channel going.
www.wpl-rc.com...
Thanks!
My C74 esc burned up the first time I ran mine. I replaced the esc with an FMS esc and its very nice now.
I'd love to say I'm surprised 🙄
I'm glad you've got it running better, though.
@@rcpie overall super happy with the c74. Love the color you picked for yours!
Good show. Thank you.
Thanks & you're welcome!
If you go on small scale adventures page he bent the pins upwards to clear the chassis
I considered doing that but it would invalidate the warranty, so I decided against it; especially after what happened with the original ESC.
Hi there, I have been following your updates on the WPL C74. I like to check what other upgrades can be make to the Jimny and have some inspiration to change mine. I don't know if you already saw it, the second C74 batch has some changes that were announced on their Facebook page, namely harder spring leafs:
"The axles are now flipped to reduce the drive shaft angle to remedy the drive shaft/axle juddering issue. Some other changes,
a. Steering rate will now be high rate mode as soon as you turned on the C74
b. Throttle rate button now toggles 2 drive modes. Mode 1 : Forward, Brake, Reverse, Mode 2 : Turn on Drag Brake and Reverse as soon as you push the throttle trigger
c. increased stall amp
d. harder leaf spring
e. increased steering rack length to reduce front wheels hitting chassis while turning.
Above updates are implemented in both the White and Bay Blue version in the latest batch released on the 21st."
Thanks for the info. I hadn't seen that.
I'm not sure of how the axle 'fix' of flipping the axles will work. I played around with the idea but found that I'd have to flip front and rear and then the angle on the front would be even worse and it doesn't actually deal with the out of phase drive shafts anyway.
Good that they're addressing the crazy dual rate issue in the steering.
The use of the throttle rate button sounds sensible.
Not sure what the steering rack issue or fix are about, to be honest. 🤷🏼 Especially as they don't actually have a steering rack!
And I wanted softer leaf springs, not harder ones.. unless they are about to collapse. 😬
Switch is for the winch but should be spring loaded as it shouldn’t latch in just sprung
Yeah, I figured what it was for and mangroves it again at the end of the video. Cheers, though! 👍🏻
Can you get a mnd90 update series
I've not revisited my MN99 for quite some time. It's currently sat in a box in bits. If I find the time, I'll try to do something with it and get some more videos out.
I guess you've seen my earlier MN99 videos. Have you?
@@rcpie yes I saw them.
Can you update it with res v3
@@sanuthjayasingha6877 I've not got a spare RES V3, so won't be putting one in my MN99 at the moment.
Greetings from Chile. My c74 ESC also burned up the first time I used it (and this was yesterday). A question: Is the installation of Res-v3 complicated? Is anything necessary to modify? Thank you very much and greetings.
Greetings to you and Chile!
It's not really complicated, no. The only difficulty is that it doesn't fit properly. You could bend the pins but then the warranty would be void.
Thanks for your reply. Excellent videos you make on your channel.
@@sebastianvillalobospasten8196 You're welcome. Thanks for the kind words!
Does the res v3 give you drag brake??
You know, I've been thinking about this and I've got a thought that I need to check.
Res v3 is supposed to give drag brake in low gear and none in high. If you're running a single-speed, then maybe you can just pretend to change great to switch it on and off. I'll have to get the Jimny out and check this idea.