Part2 Rivian and Bronco Hollister
Vložit
- čas přidán 13. 05. 2022
- Rivian R1T Owner and Bronco Owner take their trucks off roading in Hollister Hills, Ca and fight the Tank Tramp. Will they get out? At what cost? What will break? Find out in this video.
This video highlights some differences between All Purpose Off Road and Rock Crawl Off Road settings on the Rivian R1T. It also shows the use of MaxTrax to get over a slippery slope.
This video is a continuation of Part 1: • RIVIAN AND BRONCO HOLL...
My suggested gear list, including the MaxTrax is here: www.realidn.com/gear
The R1T needs "locker mode" where all 4 wheels spin at the same rate, no matter what. Should be an easy software addition.
It would be nice to have something to control power distribution, right?
@@rexbriggs3251 Yeah, it is strange it allowed the rear to spin when in rock crawl. Definitely need some software updates (and nice thing that it can be updated).
It has four drive motor’s when you put it in off-road mode it drive’s all for wheels
@@jamesdoesburg6128 That doesn't do what Jay is talking about. It spins wheels that are getting no traction and often isn't applying enough torque to wheels that are. If the software is set so that they have to spin at the same rate it would prevent this issue.
@@curtisbme I’m just telling you what I see every day I work at a proving grounds Rivian is a renter there and I see them up close
It'd be great to see the repair video! Thanks for sharing your adventures with us.
You got it! czcams.com/video/CTl5ab_AbTU/video.html the repair (which only took 15min of actual labor... but a lot more leg work to figure out which clips to order and whether Rivian would get me the parts or whether I'd be on my own to fix it).
major props to you for taking your Rivian out to play. Looks good
Thank you foxy20. Lots of fun!
I see these R1T trucks every day at the proving grounds I work at they’re very capable off-road so much so I’m thinking about buying one myself
If my experience is a indicator, You will have so much fun in the R1T!
From what I've been hearing, you have to stay on the throttle for the computer to try different traction scenarios and find the one that works. As soon as you let off, you keep resetting that action.
Also, if you need "locker" type action, you MUST use Rock Crawl as the all purpose is designed with a rear bias that allows sliding the rear around.
Apparently learning to drive the Rivian is not a simple process as many of the off-road rules don't apply.
The plastic door and rocker plates are a weak point. Cheap and easy to repair, but annoying that they are designed to be sacrificial. Hopefully the after market will see this as an opportunity and come out with some more sturdy alternatives that save the trim.
Really good insights. Are there places to read how the bias is set by mode? I'd love to have an intellectual understanding so I can check it with the visceral feel of the modes when off-roading.
@@rexbriggs3251 Sadly, I don't know of any. This is just my opinion watching a bunch of people's videos and some of the discussions that I've read.
It would be nice if Rivian would produce a guide that explains what the goal of various programming is and how the truck is designed to react to different situations. Of course, the truth might be that the programming is still being fine tuned. You might go out one day and go "WOAH, this works so much better now." The joy of OTA updates.
Most active track systems require a constant throttle. On ice vehicles 1500 rpm minimum. Stabbing the throttle and backing off when you are almost out just won't work. Looks like rock crawl is the real mode you want to always leave it in.
Subscribed. Rivian blue looks so good on this truck. 👍
Am keen for the follow up video for sure
i love this, its real test footage
Rex, great video. It is 6:14am on a Wednesday morning and I am at a loss of words because I actually met you on the road at an EA station near Denver CO (if my memory serves me correct, maybe Edwards?) and we chatted about your journey to Denver! I just happened to come across your video and I was like "I think I know that guy" lol what a small world ! I hope you made it safely to Denver and would love to stay in touch or at least check out your videos! Also, side note, I just took delivery of my R1T yesterday as well...:)
Right on my friend! We made it. Just got home charger installed… now no more random trips to the King Sooner on the other side of town just to get the charge + shop experience. We should get a Rivian crew together for a weekend mountain trail drive.
Looks fun! Tires make all the difference
When I get mine we definitely need to have a meet up at Hollister.
Yes! What fun to have a bunch of --0----0-- on the trail.
So strange in the “climb out the side” how it really didn’t want to apply power to the front wheels when that should have been able to get you out. I would have expected it to at least slip the fronts on the maxtracks.
What a beautiful truck
I have a R1t on order. I never got to drive one with the offroad tires on it I hope it is not to loud on the highway what do you think about your tires for road use as far as road noise?
Awesome video props to you for getting it dirty and having fun. How was dealing with getting parts? It’s been one of my biggest concerns
I posted a video about the repair. I had to guess at the clips part because Rivian doesn’t have a process for sending parts, yet.
definitely interested in seeing how you repair those. it does seem like it might be doable as long as you get those clips
Waiting to here back from a Rivian on the clips. I plan to call them on Monday. Will add an update to this channel.
I posted a new video of the repair. Thanks for asking!
Interested in now the repair goes, but also curious if you will be looking for aftermarket rock sliders you could use instead/in addition to? Looks like you will actually be playing with the truck like it was meant to be used, so some extra armor might be in line….even if it would cut down on range.
YES! I would love to hear from you or others on best rock sliders for R1T. I'll be investigating myself and am keenly interested in a light weight (maybe Aero Aluminum) slider.
They definitely need a way to imitate a center locking diff.
It would be interesting to see Rivian develop a beta for what you are suggesting and let me try it on the tank trap vs other modes to see which works best.
Way cool!
Thanks! Glad you liked it. You might also like the latest Moon Rocks, NV three-wheeling in the Rivian.
After this test: Brought to warranty and to the question "what happened" client answered "I don't really know, it just stopped working for some reason, I was just cruising around the city and it broke down" :D
This is quad motors or not ? If this qiad motors is easy to climb
This is possibly why we air down the tires, but still I’m disappointed with the R1T struggling a bit. Each motor is capable of moving the car by itself. I really want to see someone do an uphill rollers challenge on these cars and see how they respond.
Hi, Tell me more about uphill roller challenges. What are they exactly?
Repairs bro go for it :)
Do you then take the truck to a car wash?
Looks like off roading with racing slicks. Put some BF Goodrich ATs would have handled it fine
All they need is some type of mud tires. It has more than enough power . For what these trucks cost they should have that option at no extra cost.
It is hard to show in the video how strange the surface is at the top of the hill. It is the hardest pack clay I have experienced, and with a little bit of water, it is slick - super slick. Very little traction for the front tires. I do wonder how mud tires would do, and maybe R1T will get some more options.
Those motors are SCREWED 😂
I remember going in the water pit searching for my numberplate, because the angle was so steep that the numberplate touched the ground and the car wasn't hit... Real attack angle Hummer H3 35.5% haha
Need good mud tires and lockers.
3:11 pretty disappointing that all 4 wheels did not seem to be going and help him on that bank.
I wonder how much battery was used doing that
Right?
I reset trip A before starting the day, and took a snapshot at the end. According to trip computer: I used 13kWh (about 10% of the battery 135kWh) for 7miles of driving at 3mph, over 2hrs and 0.54 mi/kWh efficiency (vs 2.04 Rivian rates the 20” AT tires).
I guess I could have spent another 20hrs playing off road. When I’ve done trail driving, it’s more around .7 mi/kWh, so the Tank Trap escape certainly brought the average down, LOL.
They need a very simple mode - "spin 'em all" mode.. In a lot of off-road scenarios 4 Tyre spin is a must.. They can program it. Why don't they..
I like it! Rivian, please add this. I’ll volunteer to test it :)
Cool dirty video
Must change the tire
The Rivian need’s all-wheel drive.
Looks like they need to work on the programming. One will spinning, one will stationary, add more power to the stationary wheel. Seems simple but I am sure there is a lot more to it.
Check out my latest Moon Rocks, NV video. It shows a lot more of how the wheel spin action seems to work. Still figuring it out, but agree, more control to driver on wheel power would be nice!
Locker mode 2000 software addition....🤔😂
Lower tire pressure
Those clips are probably standard parts you can get by the dozen from Amazon.
I found a very close version and did the repair (czcams.com/video/CTl5ab_AbTU/video.html) but I'd like to know the vendor and part so I can get the exact right ones. Hopefully, Rivian will get the common parts available in their store, or share the details with owners.
Seems like rally mode woulda worked. Give you more wheel speed.
Interesting suggestion. I wouldn't have thought about Rally at the low speed, but maybe you are right. I will try it next time to see how different modes handle the situation.
@@rexbriggs3251 Yeah really they need a mud/deep snow mode.
i think logan is right. that scenario is not about precision at low speed. it’s just all about slinging mud, dirt, water. rally mode and then punch it after backing up to opposite side to get a little steam going. bet it would’ve been totally different.
Flip the Max Trax meatballs
What does that mean? Do you mean use the other side of max trap, or rotate 90 degrees? Something else?
@@rexbriggs3251 Put the spikes down,The weight of the truck will push the spikes down and they won't slip as easy. I was surprised after the 3rd fail they didn't try it.
Rivian wearing Pirelli Scorpions? and Bronco with KO2s not a good comparison.
Both are stock, though. We are both interested in after market tires. What do you recommend?
You see you have the wrong type of tires all season tires don't work in mud
Seems like EVs don't allow wheel spin.
Le hace falta potencia
I’ll keep my V6
Thats not tank trap. Tank trap is a 3 diamond this is just at the obstacle course one of the easiest things at Hollister hills
I wonder how the r1s would handle that
R1S would do better, I think. It has a better break-over angle, so it probably wouldn't have lost the door trim. It also has better departure angle, so it might have been able to drop in where the Bronco dropped in - I wasn't about to try it in the R1T (you can hear me say, "that's crazy, but OK" when my Bro-in-law drops in, but maybe R1S can do it even better.
can't believe you did that with 100,000 dollar truck. what are you thinking omg
Fair comment. But, man, it is so much fun to see what this thing can do.
You need better tires. Maybe with a better set you wouldn’t have trouble
That’s the mud pit not the tank trap
I guess I read the map incorrectly. When I get back to the area, hopefully you will show me the tank trap. I'd also like to check out the stairs and Truck Hill.
You should go in slanting way in straight it will not go
Was hat ihm das Auto denn böses getan ,das er es so behandelt ?
Interesting they cant keep up with orders. they have only produced under 400. And your out there tearing it up. Same for the Bronco. Then we see locally people selling these 2 models in the area same color. So beware it might be these that were trashed out there.
Neither my brother-in-law nor I have any plans to sell anytime soon. Too much fun. Both vehicles are made for this kind of adventure.
It's a Ford what do you except
This is why they make mud terrains…
Get rid of the broken parts and fab it
😂
Not with those tires guys.
R1T tires are good, but slippery mud on hard clay is not easy for any tire.
That plastic trim looks cheap and flimsy. Why even add it? Would look much better without those bits and just see the nice painted metal like any other truck.
Buy Rivian stock while it's still cheap. They have over $17 Billion in cash to make more of their trucks and SUVs
They have plenty of cash to plan and execute for the long game. I agree.
I’d like to see them by more responsive to my request to buy a full size spare, and a call back on if Rivian will let me order clips and mail to me to install.
They offered pre-order holders the ability to buy stock at ipo price, and, full disclosure, I did. I am more of a buy and hold kind of investor, and this was a relatively small purchase (about the the same cost of all the recovery gear and options such as ppf I added).
That Rivian is just too heavy for mud. That's why literally no one has reviewed it in that environment.
That’s an interesting observation. Once we have a winch, I’d like to test it in the mud. I did have the experience in mud on and up slope where it just spun and I had to back down. Some of that is tires, I suspect.
🤦🤦🤦🤦
NOT IMPRESSED..
Toyota surf can easily get of this pit
👎👎👎👎🤬
🗑️
If he'd had better tires he'd gotten out of there easily