Best Grinder - 4-1/2" to 6" Cordless Grinder "Head To Head" Comparison
Vložit
- čas přidán 9. 07. 2024
- Purchase these cordless grinders here:
-----------------------------------------------
www.ohiopowertool.com/s-2098-...
[FREE SHIPPING Promo Code: toolboxbuzz]
Best Grinder [Full article:] www.toolboxbuzz.com/cordless-...
Cordless Angle Grinder Lineup
Check out our other Head-2-Head these - all on one page here: www.toolboxbuzz.com/category/...
In order to keep the tools in this Head-to-Head somewhat similar each manufacturer was given a range from 18-22 volts, 4-1/2" to 5" diameter, and battery packs ranging from 5.0 to 6.2 Ah. The following cordless angle grinders were included in the test:
Bosch GWS18V-45 - Bosch 18V EC Brushless Connected 4-1/2 Inch Angle Grinder with No Lock-On Paddle Switch
DEWALT DCG413 - DEWALT 4-1/2 Inch 20V MAX XR Paddle Switch Small Angle Grinder with Kickback Brake
Hilti AG 4S-A22 - Hilti AG 4S-A22 4-1/2 Inch 22V Cordless Brushless Angle Grinder with Kwik Lock
Makita XAG21ZU - Makita 18V Brushless Cordless 4-1/2" / 5" Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS
Metabo WPB 18 LTX BL 115 - Metabo 18V 4-1/2 Inch Brushless Cordless Angle Grinder
Metabo HPT G18DBAL - Metabo HPT 18V Brushless 4-1/2" Angle Grinder
Milwaukee 2980 - Milwaukee M18 FUEL 4-1/2"/6" Braking Grinder with No-Lock Paddle Switch
Ridgid R86042B - Ridgid Brushless 18V 4-1/2 Inch Angle Grinder
Ryobi P423 - Ryobi 18V ONE+ Brushless 4-1/2 Inch Cut-Off Tool /
Grinder
Cordless Angle Grinder Testing Criteria
While some of the categories above are subjective, some tests can be measured to give a relative comparison for each tool. As stated earlier, there are literally hundreds of tests that can be done to compare any tool. For this evaluation two tests were selected to give a good relative, measurable comparison including: run-time and performance (speed cutting). While this is an extremely narrow set of tests, we felt it was a good baseline. Clearly run-time is hugely important with high demand cordless tools like grinders, and productivity is always an important benefit to consider when buying any tool so hence the speed of cutting test.
Cordless Angle Grinder Testing Stations
In an effort to remove as much human user variability in our test results we look to build testing jigs/rigs that provide repeatable and fair test results. This helps eliminate questions about whether or not a tester is pushing harder or holding a tool at a strange angle which might alter the results.
The three testing stations:
Performance Rebar Cutting Sled: The cutting sled removes the human element with regard to the cutting angle, and pressure. The sled was used for both the run-time calculations and the performance (cutting speed) when cutting 5/8” rebar. The sled was designed to hold each cordless grinder with the cutting disc 90 degrees to the rebar.
Removal of Thin Set from CMU Block- Testers used the cordless angle grinders to remove thin set mortar from CMU blocks with a grinding wheel. A diamond cup grinding disc with dust shrouds, attached to a Bosch HEPA vacuum was used.
Steel Grinding - The crew used the cordless angle grinders to remove surface material from a steel angle. Again this gave the crew increased “hands on” with grinding and polishing for further evaluation. - Auta a dopravní prostředky
Such innovative jigs you guys make! Love these comparisons. Thank your entire team for ya!
Awesome Head to Head as Always!! Thanks for the mention and the in-depth coverage you give every comparison you do!
These test are awesome! Thank you for putting in the work to record all the data and footage for us to see.
As a carpenter every day, thank you. Thank you for the effort and measurable stats that you provide us all. You guys are a great review resource that assists in purchasing a tool, done by carpenters for carpenters.
What the fuck does a carpenter need an angle grinder for?
Wait,wait,wait a minute he was cutting rebar!! Hello Ironworkers “” for ironworkers !! Ha, ha, ha, lol 😂 !!
@@makattak88 carpenters often end up doing a lot of everything from what I saw when I worked as a laborer a few times years ago
@@abdomination fr, Im a framer and we use a lot of angle grinders to cut metal anything. When I do demo sometimes it’s actually really useful too.
Resharpening pencil?
I haven't found anyone else with this level of commitment to fair (and often extensive) testing, transparency and impartiality. You're the one-stop shop for both discovering pros and cons of potential new tools, as well as gaining a more thorough understanding of the ones I already own. Keep it up you legends.
Project farm does great comparison videos also
@@dylantarrant8659 Agreed (David here). I don’t think I had discovered them at that point, but now I love project farm also.
"trust the pro"!!! best message ever.
greeding,
a carpenter from germany
Great info though. I am in the process of converting all my dewalt to cordless. I started out with Makita 9.6 volt back in 1977 ish when a skill saw could make 2 cuts through a 2x 4 and that was about it. Amazing progress!
Thanks
It's as if you new what i was thinking. I researched grinders all weekend and today, I get the notification about this video! I'm in deep on the Dewalt 20V max line so it's a no-brainer for me! Thank you for such detailed reviews...best resource for tools online. Have a great week!
The Tool reviews you guys do are second to none if someone were to rate tool reviewers you guys would win. The depth of the analysis line by line the information/length of video and the extra variables that you put on the table for us to look at top shelf guys !!
Great review! Thank you guys for taking the time to make this video 👍🙏❤️
I bet this test pissed off the Next-door neighbors. LOL
they all do - I donate tools to his cause - he's understanding
A Concord Carpenter / ToolBoxBuzz Good for you!
Ron
Sean Smith HAHAHA FIRST THING I THOUGHT ABOUT
the song of my people
Hi have you ever had any angle grinder battery drop off? My new DeWalt angle grinder battery at work vibration causes battery to unlock and drop off?
Great video
We here love and trust your Head-To-Heads. Just a shame they take up so much of your time and we don't get to see more. Cheers guys, much appreciated
Awesome video and informative as always, thanks for all the hard work!
I loves these kinds of comparison videos as they give me so much information on the tool I'm buying. It just irrates me that at the end of the day I always buy the same brand of tools I always get. Simply because I'm so deeply invested in their ecosystem.
you guys have the best tool reviews, keep up the great work!
In reality it doesn't matter, had contractor's use my Ryobi multiple times when the DeWalt goes missing and surprised when they hear how much I paid and it still works. They keep using it in the shadows because contractor's don't use Ryobi. still can use the shop corded Hilti but want cordless. Had put a tracking device on it because all good expensive go missing.
Love these videos. Very in depth and informative. Thanks guys!
I love the Way these guys do the testing,
Completely impartial, honest and to the point,
Keep it up 👍🏻
Thanks
Great comparo, thanks for all the hard work you guys put in!
Great review and I specifically bought the Dewalt 6 tool combo kit to get the grinder. I did end up buying a couple of extra 6 ah batteries but it runs great. I love it. We are remodeling a house and it is great for cutting off nails and other tasks and so much easier to grab out of the kit for those jobs. I do have a corded grinder but it gets to rest up now because I have found nothing the Dewalt can't do for me so far. I would also recommend the battery-powered Dewalt skill saw. That thing is a beast with the 6 ah battery in it. We cut subflooring all day with one battery and no recharge. I got that in the same combo kit. I think we picked up the entire kit around Christmas for less than 500 bucks.
Nice video kinda solidified what I had as a general opinion already. I do a wide variety of grinding both corded and cordless as a welder fabricator so seeing extensive tests like this really helps on future purchases and what other might want suggestions on. Alot of folks think that a grinder is a grinder but the proof is obviously different.
What a phenomenal, no-nonsense tool review. Thank you!
amateur reviewers take note. THIS is how to do a proper unbiased comparison. Straight to the point, accurate, and detailed. I now can make an informed purchase!
Excellent tests and comparisons! Thank you.
That was an absolutely awesome head to head video fellas, thank you for doing it. I own both the Dewalt and the new Milwaukee, and both are great tools, and I also like the Dewalt a little better!!
Great video as always guys!! Thanks for paying so much attention to the details.
Caleb LaChance thank you sir! Please subscribe
I have the Dewalt and Milwaukee and they're both totally fine and work great but I definitely like the feel of the milwaukee better so I tend to use it more often.
Guy above said they're nothing but junk and at his job they had 8 of them and only have 2 now. What's your experience with them?
Excellent comparison review. Non-scientific, purely hands on, just what a skillsman needs! Keep it up boys
Excellent H2H video. I have the DEWALT 20v version and is excellent but recently got sucked into the DEWALT Flexvolt line and the Flexvolt grinder blows them all away and smokes my DEWALT and Milwaukee corded grinders away as well. I wasn’t going to use the Flexvolt system until the they came out with a Flexvolt 10” dual battery system tablesaw. The dumbest thing DEWALT has done in a while is to not design a 10” tablesaw around the double battery Flexvolt system the 10” dual battery and adapter system they came up with for the sliding miter saw! Such a bad miscalculation!!! I only got into the Flexvolt system because a friend loaned me his DEWALT Flexvolt worm like circsaw to try while he was on vacation and feel in love with it. He also had the DEWALT Flexvolt sliding mitersaw and loved it as well. In 3 days of framing a 4,000+ square foot house the first battery lasted 2 days and 7 1/2 hrs into the 3rd day. I used the 2nd battery for 20 minutes. Tried the first battery again and it had cooled enough to finish the last 10 minutes. I bought the worm drive like DeWalt Flexvolt saw that evening and bought the Flexvolt grinder a couple of weeks later.
Can you post the link to the test on your website in the description? I didn’t see the link
Thanks.
Ron
I professionally use the Dewalt. It's great! Low vibration, strong, thin. Very comfortable!
And ugly.
Ridiculous how accurate and unbias these tests were, absolutely all about what the tool can do. Perfect evaluation.
huh? what are you talking about they have a bunch of worthless categories and give them equal weight to performance and speed....that tells what the tool can do not price and the other subjective BS values......obviously if it was just about what the tool could do then Metabo should have won. first in performance and second in runtime....enough said.
@@kenpoman1 Not really bs categories. Most people would take slightly slower cutting for a tool that is more comfortable to hold, doesn’t vibrate as much and is lighter. But most will just buy the tool based on their existing battery platform anyways.
I’m over here just now finding this channel. Damn, this is good stuff! Keep on keeping on please.
You guys do a great job with your reviews. You're unsurpassed.
Thank you guys for your time and energy.
you guys are thr best and really do a good job at demonstrating which is the over all best equipment in the market thank you very much .
SO well done, so thorough. Excellent video.
Thanks for the test on the grinders ; as a Ironworker, ya DeWalt seems to be the go to tool , we use the drills for the holes for post tensioning, cables, grinders for cutting the rebar, and snail that holds the ties together, we use the band saw actually for cutting the rebar on the job thanks!!
Bosch has x-lock mechanism grinders, which is probably the quickest one, but require a different type of blade-mount.
you can still use classic discs on the xlock machine
Top notch.
I like having all the stats. This way a DIY guy like myself can better choose for ‘my’ needs where cutting time, number of cuts Is less of an issue.
Gosh, I wish I had cordless tools when I built my house in the early 80’s. Then again, my dad built his with hand tools.
My DEWALT 20 v has been put through some heavy use and it always produces the work without complaint. The key is to have good batteries. One on, one charging as with all battery tools.
As an aside I also have a corded DW which I use mainly in the shop. It’s a beast and flattens welds in short order.
Ton of work and fantastic informative video. Thank you!
Great review and also the web review. I just get the DeWalt one a few week before you announce this review and I was waiting this for long time. Great work! Thanks for the info!
Thx for the handy comparison! keep up the good work!
I enjoy the reviews rob does great job thanks👍
Great comparison, really helped making a decision on which angle grinder to buy, you guys rock !!!
Great detail , great video ... really helped me decide my next tool I will buy
That you for you do. You guys make it very easy to see what we get for our money.well done!
Awesome video. Was a little dissapointed with the 2980(Milwaukee)'s run-time but I appreciate the video nonetheless.
Also, I'm a testing engineer and the conviction you guys have to removing human error from these tests is awesome. One of the best tool testing channels out there
Great!! Long time waiting grinding H-H.
Thanks guys this was super helpful...cant thank you guy enough cheers
Great testing!! Thank you!
As a steamfitter I've used a lot of grinders. Dewalt and Metabo are my favorites even in the cordless. But the last two jobs that I've been on have used the Milwaukee cordless grinders and they are garbage. We had about 8 of them on the job and after a month or two we were down to only 2 working grinders.
metabo and Bosch for me, absolutely beasts, made in Germany grinders
What are wrong with the milwaukee grinders? In project farm tests the milwaukee grinder destroyed the others. I know his tests aren't long term but. Did the milwaukees burn up??
@@marcowens3522 I was on a job were the company had bought 8 new grinders, I don't have the model number. By the end of the 2 week we only had 2 that would still work. There was only 2 of us welding and they weren't overworked at all.
@@jeremycurran4488 we're they fuel?
@@jerrelCbanks Yes they were Fuel M18 grinders. Lately I have used some Milwaukee grinders that have held up over light daily use just fine and I hope that they continue to improve their products.
Kind of disappointed in Makita. They usually fair in the top 3. Oh well, probably still choose that platform. Thank you again for the best tool reviews.
I really love all your head2head
Y’all have the best tests, hands down
Thank you for all the detail you give in your videos I'm definitely a makita fan I know there not the best but I really like there tools
Great in-depth testing 👍
im 19 now i remember when cordless grinders were gutless and had less than 1/5 the runtime before their hours long recharge. boy technology sure moves fast
Viper Strike sure does! I remember when I was 19! ;)
Great job guys you actually seem to cover any questions that. I could possibly have.
nice review Rob and crew!
Îm glad to see the result, I’ve just bought a dewalt brushless 20v (im on dewalt plateform) before I saw this video!
It looks like it is in fact more efficient with the brush-less motor. Not just marketing BS
So what do you think of it? I'm considering going out and picking one up. Not sure if I want the 20v or 60v though.
I bought one the around Thanksgiving for 125 -130? Bare tool.. Awesome grinder smooth super strong and cool running. Of course it's awkward because of the battery. I'm using 6 ah battery and it's great to get so much work from it with just that battery I have plenty other batteries but that 6 ah is seriously noticeable how much work you can get done before you need to swap in another battery.
The coolness of the tool after using up the 6ah is like what the hell? NO noticeable heat buildup. I can see at least one more grinder like this so I no need to change the wheel whatever that maybe such as flap disc to grinder disc. So I can spend more time welding.
The 60v wound be great for lots of hard digging and deep grinding for opening up cracks for weld repairs for my heavy equipment. At least that's what I'm thinking that 60v wound be best for.
The 20 volt grinder is real nice for the lighter cutting and grinding. After seeing this review I'm very happy with this grinder!
Hell it's the only grinder I've owned and first thing never put on the shroud!
It really well thought out even that shroud is easy to adjust. And smooth I mean comfortable holding and using it for 15 to 30 minutes at a time. Ive got arthritis in my hands so I can get pretty miserable using tools that make me work longer and less efficiently. But what do I know. Have fun!
Wow I appreciate what you guys did thanks for the info
Great video and I appreciate all the work put into it but I don't think tool-less lock nuts should really be considered an advantage. I have been doing metal working for over 15 years and almost never (unless a wheel gets jammed when cutting but doesn't happen often) need to use a spanner wrench to change wheels. Simply press the brake grab the wheel and turn the wheel itself. Put the new wheel on and do the same thing.
My only problem with this test is including price in the rating. If you have all of one type of tool then getting a battery and charger for another will greatly impact your price point. If you already have an eclectic mix of tools and don't mind switching it up, then price matters, but if you already own Milwaukee or Makita, then buying Dewalt will become more expensive. So the price shouldn't be a final factor, more just a matter of noting.
I bought a Bauer angle grinder and I really like it good balance and not to heavy. So far so good 👌👍
Thanks for another great review!
Excellent VIDEO. Thank you.
Once again a thought out test and review. 👍
Amazing reviews and info!!
Wow never had one thanks for the knowledge, really want one now 👍
I just found this channel today and I’m impressed with the level of detail and quality that these tests offer. That being said, if I had to critique the test at all I would say I wish there was a way to prevent the person testing the tool from seeing the brand while conducting the subjective tests. This is probably nitpicking at its finest but was something I thought of during the video that might introduce some unconscious bias because we all have brands that we gravitate towards. Other than that great vid! Thanks for the valuable info
thanks for sharing a lot of hard work
This video need to be updated, there's been so much innovation in this space.
Variable speed and pricing are my top deliverables in seeking out this versatile tool. I want to be able to cut fabric, wood and steel with the same tool. ✅💪🏽👌. GREAT AND EXTENSIVE REVIEW. It sounded like the host was literally salivating at the mouth with all the information he was dying to share. 😱👌
Very informative and specific. thank you for the time, info and details. Best comparison video I've seen. Much appreciated. :~)
Like how detailed you do all your tests
Great review again 👏🏼
Been using a Milwaukee when the Fuel first came out. It rocks and I really work it. Your test ranked it in the middle so I would be dumbstruck to try the others as I’ve never faulted the Milwaukee.
Good job and thanks from Land of Oz
I've used many cordless grinders and the only one that comes even close to a corded model is the DeWalt flexvolt. Surprisingly even the Milwaukee fuel comes up short with their grinder.
And as good as the flexvolt is, the run time isn't practical for it to be a replacement for a corded grinder. I really feel the technology isn't ready for cordless grinders just yet.
Ranking them without taking price into consideration Dewalt and Metabo tied for first and Milwaukee came in second. We use 6" grinders on the jobsite all day every day. I've not switched to cordless yet but I'm on the Milwaukee platform for everything else.
Not doubting the test results but with my use, batteries nor power has been questioned with my long (many years) usage of the Milwaukee grinder. Never faulted it (used a Makita cordless grinder prior to that and was extremely disappointed but that was when these first came out).
My Milwaukee has done everything and more of what I demanded. Following this test when (if) it dies looks like my options will only improve. For what it’s worth, the toolless blade change and brake is what picked this for me.
Really nicely done and simple video. I already have some bosch core 18v tools so it looks like this grinder is next.
Maybe you have done it but I'd be interested in a battery platform evaluation of brands like Hilti and Metabo relative to a more common brand like DeWalt. I know that's one advantage DeWalt and Milwaukee have is just the shear availability, even in rural areas.
well thought out and fair tests.
Very informative. Thank you.
Old video, new to me (LOL)... Same excellent video quality (for content, besides the excellent picture). I will repeat myself saying that you are my most reliable resource of tool evaluation in the entire YT environment. Usually I do my own homework before making a purchase and this time I was looking into the DeWalt DSG 415B (not shown here, but an upgrade over the shown model). I was saying that I do my homework and I make my purchase and after that I look deeper into what people have to say about it... In this case (again) your findings overlapped perfectly with my choice. Stay safe and have a good one; cheers!
Thank you
In my opinion Ryobi wins for best value.
It takes 3rd place in performance and is half the price of most of the competition. Considering its price you would have expected it to be dead last in performance. That is impressive. Even though it doesn't perform the best in run time. It still tied with the Makita at 35 minutes and batteries for Ryobi are much more affordable.
Seriously, just add the $20 and get the Bosch. It's got way more features, it's lighter, more ergonomic, better control with variable speed + 3 settings, better runtime, battery level on the tool, better build quality (German made), better warranty (Ryobi won't honor the 3 years if used on PRO/contractor duties). It's surprising it only costs $20 more than the Ryobi and about the same as the Ridgid despite all the extras.
Great job, thanks for sharing. I was looking to buy a brushless 4.5" grinder so this info is very useful. BTW I have Ryobi, DeWalt & Milwaukee batteries so I might have bought a Milwaukee. I'll probably go with the DeWalt grinder after seeing these results so thanks again. Keep up the great work.
Best grinder is the one you have on you.
Daniel M better yet, the one that completes the task needing to be done
So your cellphone? and the Grindr App?
@@ViolentKisses87 oh no hahahahaah
Or the one I can actually afford cause that’s the best I can get
@@ConcordCarpenter could you put the winner up against metabos 600606421
WEPBA 17-150 Quick RT DS.
Cause grinders fit into two categories small to zip something so insignificant an attachment on a drill will do the job or everything else. The metabo is barely more in weight than a 41/2" but is a 14.5amp so 9" grinders really aren't something I see continuing into the future very long.
Professional and transparent. Best!!!!
Looking into dewalt grinder and I do have flexvolt batteries. Price isn’t a problem as much as is the flexvolt better or not worth it. Which one do you recommend?
I must say, I'm impressed! I like this video!
Its a shame you couldn't get hold of a Fein CCG 18-125 BL or BLPD. I have heard they are very smooth and powerful. Limited videos or reviews on them
True! I almost bought a 110v Fein recently until I discovered it too, was made in China . I guess that is where we are with battery tools today. Hell even most of the corded tools, who am I kidding. I just had to replace my last USA manufactured 110v Bosch 1347A that finally died. I ended up buying the one, and only, new in box, German made, 4.5" Bosch left in the store! My 2nd choice was the Chinese Fein. It was not super powerful tho. The Hilti is chinesium too I checked. Oh well ,here's to the good old days before the chinese power tools 10 yrs ago!
There is a "Fein" number of people who use them (pun intended.) There are tool brands like fein potentially or specific types of tools like the dewalt flex volt grinder that always beat the competition. Sure its powerful and smooth... the price isn't so smooth at $499 depending on sourcing. Alot for one tool, one battery platform, availability, customer support etc.. etc...
Metabo makes the smoothest and most powerful grinders in the world and its really not close.
Great video. Keep them up! Thanks
Glad you like them!
Flex would be a serious contender in the 5" category for this
Great video!
This channel is a "BOSS" when comparing tools !!
Well done !!
I'll go with the nr 2 winner -----> The Bosch Cordless Grinder !!
I really like that " LED WORK LIGHT " feature !!
Comes in very handy when its a bit dark @ ur working area.
I have the 5 inch version with the normal switch. I'd go for 5 rather than 4,5. It's okay, but not super-fantastic.
Is a 4.5inch and 5inch cordless angle grinder the same exact tool just a bigger guard?
Another great video...
Thank You
One of the best tools review on youtube! Well done lads and greetings from Europe !
thanks. I figured after hours and hours and hours of looking at the " technical data" and the pictures of the grinders to scale that the brands...... of interest to me.... ranked very similarly to the results in your testing. its good a wonderful thing to have proofs. c:
Excellent!
Love your videos! In this video I do realize it's an older review; however, at the time Metabo actually had a 6" cutting version (slicer wheel) that is specifically designed for metal cutting in lieu 1 does all thar probably wouldn't be more fair to specifically target discipline w/ best tool for application. Personally owning a mechanical company that predominantly supports process piping in automotive manufacturing/pharmaceutical/food/beverage plants, we have years of data supporting the Metabo brand is far superior to other brands when metal fabrication is one of your core disciplines.
Hilti is known for concrete; however, has tools to accommodate most disciplines. Metabo is known for metal working; however, like Hilti it accommodates most disciplines in their product line. In this i wouldnt put Metabo against Hilti's rotary hammers or core drills because if we are setting anchors for columns on a pipe rack crossing an egress, core drilling for a floor penetration, confirming there's no structural members inside concrete we use Hilti because thats who they are. Dewalt does make solid tools and personally I have many at home; however, Dewalt targets mostly commercial clients and more specifically wood working. Industrial brands such as Metabo's German made product line or Hilti's line shouldn't be compared to commercial/residential tools that in a year won't be functioning nor pass weekly/monthly safety audits nor are rarely seen in industrial environments.
Again i do see value in this
test for most consumers and truly appreciate what you/your team does. This feedback is only based on experience, year end numbers spent on small tools/consumables, site experiences of other contractors. All tools have a specific job they do well and most manufacturers have a discipline they target; therefore, I feel comparing tools that target all should be compared but not getting elite manufacturers and comparing their core discipline against the ones that target all markets, example Festool/Wood, Hilti/concrete, Metabo/metal when comparing Metabo to say Ryobi or Makita compare wood working. Just my opinion here. I would love to see a review based on manhours used after a year of cutting 4" sch 40 CS or 316 SS with same test.
Thank you again and interesting perspective and great video as always!!
Your channel, always a thrustworthy one. 👍🏻👍🏻
I appreciate that!
I have the old DeWalt brushed 20v grinder that I give to people I hate, and the DeWalt 60v which is my best friend. I put on a 7" diamond wheel and can cut through concrete block or 4" cast iron pipe with a metal cutting disk.