how to reset filter change alarm in kent grand plus ro
Vložit
- čas přidán 10. 09. 2024
- Continuous beep sound in kent grand plus RO is the alarm for filter change. But irony is that recently i have change all the filters. link is: • how to change all filt... Actually the choke or ballast inside the machine is programmed in such a way that after 700 hours of use it starts beeping. It does not give the exact condition of your filters. A small push button switch is present inside the ballast for reset. After giving power to machine press this switch until the continuous beep sound stops.
Give this man a medal 🙏
Keep up the good work sir.
Thanks a lot
Thank you Bhai...I also changed filter three months ago and I was shocked when Kent Technician asked me to change UV lamp and filter both...Thank God, I saw this video and resetted the alarm...UV lamp was fully functional as it's glowing...You saved me more than 5000.... Thanks a ton brother🙏🙏🙏🙏🙏
welcome and thanks
Works like a charm; did not even need to remove the cover, the small opening on the side can be used to press the button. Thanks bud.
Thanks a lot, very useful. Alarm based purely on running hours does not indicate that filters are indeed dirty, it will only increase sale of filter cartridges and expenses for service technician.
Thnaks, your video helped me to reset the alarm. There is nobody to replace the filter during the
Lockdown.
Thank you very much. I changed all my filters worth Rs6,000 just 6 months ago and had this alarm cut off. You saved me from another Kent scam.
thanks and welcome
Thanks, This was very helpful in this lockdown.
Glad it helped!
Sir your video was like a blessing from above for me during this time of Lockdown.
Only one thing, I had the reset button on the right side, beside light indicator. I think the difference is because of year of manufacturing... For new amateurs like me, the switch is called sw1.... thanks again sir from the bottom of my heart....
You are welcome
I have the same model,but it's not working for me. Can you suggest something else
@@nabinchattaraj1621 If you got the SW1 switch, please keep it pressed for around 10 to 15 sec, that might help
If this doesnt help then my understanding is you need a replacement of the infra thing (my take on what i learned the other day, better that DIY advises)
BTW i had my filters replace about 20 days before i faced this issue
Seems like each time that you replace the filter, this infra thing needs to be reset which the visiting engineer didnt do
sometimes micro-controller of ballast gets defective. in that case resetting won't work. replace the ballast or bypass it. Video link
czcams.com/video/W8kH9ruunP0/video.html.
🙏🙏Thank you so much🙏🙏 भाई सहाब मैं तो पूरे नए फिल्टर componant ऑर्डर करने वाला था..... पर आपका ये वीडियो देखा तो मेरे वो पैसे बच गए.... मैने तीनों फिल्टर one by one चेक किए तीनों सही थे कोई भी ब्लॉक नहीं था फिर भी alaram बजते जा रहा था और केंट पूरा काम करना बंद हो गया था.... आपकी वीडियो से मुझे उसे RESET ट्रिक मालूम हो गया..... Thank you so much 🙏
welcome
after replacing filter beep was still their, though I searched so many channels l didn't get proper guidelines, your was helpful , it got solved, thanks
Glad it helped
Thank you for the useful video. I could reset the ballast switch in my Kent Mineral RO Grand Plus, which had a smaller, round black button than the model in your video and I reset it by continuously pressing against that button. With great difficulty during this CoVID lockdown, I had got the filters changed two days ago and it suddenly started beeping continuously in the middle of the night. Thanks to your valuable content, my device has started working again.
How long you have to press? And how did you got your filters changed during lockdown
Very useful during quarantine, simple solution, easier to find on CZcams than installation manual. Thanks for the effort.
Glad you liked it!
Thank you so much sir for sharing your experience with us..Some how very confusing suddenly happened the situation..👍🙏
My pleasure
Thank you Sir! We have changed filters recently while repairing for some other problem. The alarm went off now. I reset it like shown in the video
welcome
I love description because it's in English , I could understand it, others speak with thier tongue languages so I couldn't ilundersrand anything, thanks alot friend
welcome and thanks
Really helpful... just during this lockdown i could reset it after seeing your video.. although the model of ballast was different , but the concept was same.. very informative.. keep uploading such helpful videos... thanks . ..
Glad it helped
Hi!
Today 24-04-2020 we was faced beep sound from the RO , we tried to call to kent service centre.due to covid-19 effect in lockdown time we had faced water problem.no mineral water service in our area unfortunately i typed how to repair kent Ro on youtube suddenly opened your channel seen,learned and implemented immediately with your support.thank you and thank you very much for your help.
my pleasure
please do video on filters and other parts also
i tried 2-3 times by switching on and off by pressing reset button, finally its working. thanks.
Glad I could help
Was yours not reseting when you pressed continuously?
Thanks bhai.
Worked like a charm.
Also i did not have to remove the cover. I USED A L-key to reach the reset button in hard to reach area. There was an opening in the cover for the reset.
great
DIY Repairs thanks for liking and higlighting
👍
Thanking you. I reset the switch. Now it is working.
thanks and welcome
Thanks, its very helpful, I've changed UV tube and reset filter alarm switch on my own. Now its working fine. Thanks again 😊
Glad it helped
It really works....I reset in first attempt..... Thanx for great help sir.....
Welcome 👍
It really works. Give this man a medal 🥇
Thank you so much bro. Perfect guidance to reset alarm of Kent grand+.
Happy to help
Thank you Sir. It worked for my RO. This is helpful & money saver.
welcome
Thank you. U saved our 5000 rs. 🙏
welcome
Thank you bhai.
Very helpful.
In new models of kent grand +
Reset button is just beside ON led indicator, no need to open blaster.
Thank you bro it worked for me KENT excel plus..
Thank you so very much mate, we were struggling to get a mechanic in this lockdown. I was able to reset my alarm 🙏🙏🙏
Glad it helped
Very informative and helpful.. thanks for the video
welcome
Thank you so much you saving my 1000Rs
Thank you. This helped to solve the issue by myself. Just a tweak is that instead of opening the blast box, unused a small wire to insert on top hole to reset.
How...
Great tip!
Thank you very much Sir. it helps in this critical lock down period i am able to restart my RO.
Glad it helped
Lots of thanks...
Thank you so much, it's very useful on my correct situation ...
glad it helped!
Thank you so much! This was amazingly useful during the lockdown. This worked even though we had a different RO model.
Glad it helped!
Thankyou for all the help, your videos are very informative and helpful!
Thanks a lot !!!! its very useful .. My filter was giving long beep and its working now :) :) :)
Glad it helped
Is water quality same. I'm not change filters just reset ro
Thanks so much! I was able to fix my RO and save technician visit cost!
Glad I could help!
It is really helpful, I am able to reset the button now. Thanks for sharing 👍👍
Glad it helped
My RO switch was quite inside but I managed to reset that..
Thanks brother...
Glad it helped
Thanks jii..just now sort out the same problem ...
Great 👍
Pressing the reset button for a continuous period of time didn't work for me. However pressing it n then releasing it quickly for like 10-20 times worked for me. I have the model where there is no cover for this alarm and you can directly access this button after removing the main transparent cover.
What model you have ?
Fantastic information , worked for me. Very handy in emergency.
Glad it helped
Thank you so much. We struggled a lot in this lockdown. This video was very helpful.
Glad it helped!
Thanks a lot sir...Your video like a blessing for me in this lock down...This is my first comment to any youtube video since I have been starting to watch youtube
its my good luck that your first youtube video's comment goes to this video.
Thanks for this information, i was going to buy another RO.. u saved us🤗
Glad I could help
Many thanks. Video helped us to reset the alarm on the Lockdown times...
Glad it helped
This did not work for my kent RO. But when I interchanged the negative and positive terminal of the main supply of RO, the beeping sound would stop. Finally it's working 😂. Now I don't have to pay 3700 (i.e. RO technician was telling) for just this small kind of repair.
Interesting!
Thansk a lot we had this issue and water stopped and in this lock down this is blessing Thansk a lot we did exactly how you said and it worked Thansk a lot
welcome
Yeah man You really deserve 1Milion thanks
welcome
It is really helpful sir ji
Glad to hear that
U r great, Prabhu
Fixed it
Thanks boss this solution helped 🥳
Glad it helped
Thanks! Saved rs 2500.
welcome
very thanks. At the time of lockdown your video helped mea lot
Glad it helped
Thanks sir...it worked like a charm. It was great help during this lock down situation.
Glad it helped
Sir I tried resetting ballast by pressing button from hole of ballast but the alarm doesn't turned off what should I do?
Thanks. Thanks a lot. Solved my problem. Thanks again.......
Glad it helped
Thanks man you saved my 150 rupees
Great 👍
God bless u boss.... in all tat u do...
thanks
worked like a charm, thanks ! very helpful in this time of lockdown
You're welcome!
Sir maine resetting kiya then off kar ke on kardiya..
Then problem solved..
Thanks
welcome
Very helpful vedio thanks a lot
welcome
Thanks for the video 🙏🙏
Thnaks for Video , It helped.
Super, it worked. Thanks for saving me from Kent robbing me again
Great to hear!
What means Kent robbing again? I couldn't understand..
@@anujmb Kent guy changed the filters, but did not reset the alarm, so it will start beeping after a certain fixed time and the machine will completely stop working until a kent guy comes and resets it and changes the filters again, many customers will not understand the trap. Kind of blackmailing just like hackers do by locking the system
@@lifehealthandhappiness5661 so true
It was very useful. But it would be better if there was a clear angle so that anyone could exactly see how the button looks.. I personally had a little wrong idea of the alarm button and was continuously pressing the wrong one for 10 mins😅.So it would be better for future viewers. 😊
Thanks for the suggestion. I will take care of it in future.
Thankyou sir , it helped ☺️
welcome
Thanks a lot
It was very helpful especially in lockdown
Glad it helped
Found very helpful, thank you for sharing this useful info :-)
thanks and welcome
Thank you so much dear ..this was really very very useful. Full day we were trying to connect Kent to log a ticket, but we could not reach any number. Amitabh Bachchan ke daddy kehte hain..Mann ka ho toh achcha...na ho toh zyada achcha.
I think morning could not log the call..saw your video and just few minutes back resolved the problem.
Very good job and all the best for such quick good solutions.
Do let me know if you have some good knowledge on Fridge too or any other links for the same.
thanks and welcome, problem kya hai fridge me?
Thank you so much, our filter wasn't working from a week...
You're welcome!
Thank for the correct information 🙏.
So nice of you
Thanks a ton buddy...that was of great help..
welcome
Thank you so much! I could fix this problem.
You are welcome!
It's working thanks
Thanks...worked for me
glad it helped
Thank you was of great help during lock down
Glad it helped
Great information!..not only helpful in lockdown period ..but even in normal times!
glad it helped
Very helpful.
Thanks a ton
welcome
Very useful, thanks👌👌
glad it helped
Thank you so much.
thanks and welcome
Thanks , this is very helpfull 👍👍👍
Glad it was helpful!
Very helpful thanku
welcome
Thank you sir
Thank you so much, it helped a lot
Glad it helped!
Great help. It worked fine.
You're welcome!
Thanks very much for this tutorial. I found the reset switch but pressing it didn't cut the alarm in my case. I have Kent Pearl model.
The switch should be long pressed until the beep sound stops when the machine is ON.
Thanks 😊 it helped.
Glad it helped!
Thanks..it worked!
You're welcome!
After doing this beep sound stopped. But, UV lamp not glowing. Should I replace the filter?
replace the uv lamp only. how old is filters?
Sir, From our Kent Grand plus PCB an interrupted beep sound coming and red light blinking .Filter not working. How the problem should be solved ? Please make a video on the problem . Give suitable suggestions .
try to reset the ballast two to three times until the beep sound stops. if the beep sound does not stops then check the UV lamp. if UV lamp is good that means the micro-controller of ballast is defective. you have to replace it or you can bypass the ballast.
Video link
czcams.com/video/W8kH9ruunP0/video.html
Thanks soo much help in lockdown!!
Happy to help!
Thanks a lot.
Its working now.
😊😊😊
Welcome 👍
Sir i technician chamged sedimnt filter and carbon filter in august 2019 now in 2021 its beeping again with 4 beeps. Now how to dete t that which fikter to change sedimnt or Ro or carbon?
the ballast does not give the exact condition of your filters. it works on number of hours of use. it only detects the UV lamp fault. if uv lamp is good then reset the filter it will work again. but it is better to change the sediment filter and carbon filter once in a year and RO filter in two to three year.
I have kent grand plus ro. It's only 14 months old. It's making continuous sound. technician is saying I have change all the filter and it will cost 6500₹.
And I have to pay 6500₹ every year to change filter.
Is it true or should I just press reset button and change filter after 2 years
when to change the filters depends upon the input water TDS. if it is 250 to 300 then change sediment and pre carbon filter once a year and RO membrane UF membrane and post carbon filter in two to three years. yes you can reset.
Thank u uncle 😃
Always welcome
Thank you for the video.
You're welcome
Prefect, thanks a lot my dear..
You're welcome 😊
Kent maxx -Green light is always on , filter stop working.All filters are new except UV tube what is the problem.
if no water is coming that means choke/ballast is not working. either replace, reset or bypass it. if ballast is good and UV lamp is glowing then check the solenoid valve.
U r great. Fixed as u said.
Glad it helped