How To Carbon Fiber Vinyl Wrap Car Interior Trim | Exterior B-Pillar

In this video, I'll show you how to use carbon fiber vinyl wrap to add subtle accents to interior trim pieces and the B-Pillars of your car.
**The carbon fiber vinyl wrap was provided by HTVRont.**
Get the vinyl at this link -- watch the video to find out how to get a 10% off purchase code of this carbon fiber vinyl (only 15 codes available!) www.amazon.com...
Check out HTVRont's Summer Beach sale 21-27 June 2022 featuring summer bundles with discounts up to 30% off: bit.ly/3n5CYJe
Check out my Instagram: www.instagram....
Instagram handle: @color_change_customs
Get the tools you need for your vinyl wrapping projects at these affiliate links:
REV Brand Heat Gun: amzn.to/2Hm955P
3M Blue Squeegees: amzn.to/3mHuI0C
3M Gold Squeegees: amzn.to/3mNQeAO
Monkey Strips felt buffers: amzn.to/3v2feaQ
Banana Buffers: amzn.to/3stHH7H
Ehdis Fabric buffers: amzn.to/3ecInt0
Micro-squeegees: amzn.to/2Sofkbn
3M Finish Line series Knifeless Tape: amzn.to/32N6Ctd
3M Design Line series Knifeless Tape: amzn.to/3ckvGuW
Vvivid Utility Knife: amzn.to/35WVZ99
Olfa Stainless Steel Body Utility Knife: amzn.to/2RKAgsQ
NT Cutter A553 Yellow Plastic body knife: amzn.to/3alSUkh
NT Cutter 30 Degree Snap Off Blades for Utility Knives: amzn.to/3cfTiRf
Olfa 30 Degree Snap Off Blades for Utility Knives: amzn.to/3kM1Brd
Back Slitter / Body Guard Knife: amzn.to/3kiesmf
Vvivid Wrap Gloves: amzn.to/33KfBe2
Benzomatic Torch Head: amzn.to/3qxCfAJ
DeWalt 9’ mini magnetic tape measure: amzn.to/2P4pOyG
Stanley 12’ tape measure: amzn.to/2QB6jxY
Tool kit pouch: amzn.to/3mXj8yG

[@businessentreprenuer4174]

Best carbon wrap video I’ve seen … needs 100k view!

[@ColorChangeCustoms]

Thanks, and thanks for watching! 🙏

[@SnowYKitteN]

the best informative video, thanks!

[@ColorChangeCustoms]

Thank you and thanks for watching!

[@joshgrant8854]

That's funny I got the exact same carbon fiber wrapped and squeegee for 6 dollars on amazon

[@darrenmetal3338]

I want to do my B pillars like that. Dang that looks awesome! Thanks for showing how you did this 👏👏👏 Subscribed!

[@ColorChangeCustoms]

Sure thing! Thanks for watching! B-pillars are pretty easy to do...definitely go for it!
If you want a "dry look," I'm a fan of this version: amzn.to/3M7HJQ0
If you want the glossy look, I like this stuff: amzn.to/3K5N4Vc

[@roberthenry9319]

Why do you want to make your B pillars to look like a Tinker Toy car?

[@darrenmetal3338]

@@roberthenry9319 because I like it?

[@matthewchristeson6589]

For the alcohol/water mixture, what's the ratio on that? 1 part alcohol to 5 parts water?

[@ColorChangeCustoms]

I typically dilute 99% alcohol in a 80/20 ratio alcohol/water

[@gam3rhashtag]

Good job looks easy to do, is this cold resist like rain frost if you use this brand outside ? is it good sticky ? i had some other brand 2 years ago but it was a bad job and didnt work so i spray it black :(

[@ColorChangeCustoms]

Thanks and thanks for watching. The vinyl i used is automotive vinyl, so it's resistant to the environmental elements, to include cold and rain. The vinyl is sticky enough, but the surface you apply the vinyl to affects how well the vinyl will stick. If the surface is smooth and glossy, the vinyl will hold well. If the surface is matte or textured, the vinyl will not stick well.

[@TheDryLife]

Can you warp a dash in vinyl wrap

[@ColorChangeCustoms]

I've never tried, but you probably could.

[@alanburns9466]

What if there is texturing on the surface? Should primer be used?

[@ColorChangeCustoms]

You can use primer, however, I recommend not applying to textured surfaces, as the vinyl does not tend to stick well, even with primer. Additionally, with primer, when the vinyl is removed, it tends to leave a lot of glue residue that could be difficult to remove.

[@michaelknight2897]

Not on vinyl is the same apparently. I have some brushed aluminum I tried to use but it is very rigid. Is there a name for the softer kind?

[@ColorChangeCustoms]

Sorry, I'm not sure I understand what you are meaning with a softer kind or not on vinyl.

[@michaelknight2897]

@@ColorChangeCustoms the brushed aluminum is far more rigid than what you were using in this video.

[@joeyconnor5182]

What kind of adhesive gets left behind after removal?

[@ColorChangeCustoms]

If you use a quality brand automotive vinyl wrap, little to no residue should be left when you remove the vinyl.

[@lana6335]

Scary to use the cutter. Might cut the car interior...

[@jesscabrown8240]

Can you put this on leather parts of you car

[@ColorChangeCustoms]

I wouldn't, as the vinyl will not stick well, if at all. Vinyl wrap sticks best to smooth, glossy, hard surfaces.