This video was my inspiration for my turbo. I built a 60/67/12 out of the stock hx35 I had. Tried it out today. Sounds exactly like your's. Best sounding turbo I've ever heard. Also 250* cooler egt's, less smoke and more powerrrr!
@@jonathonlesko3554 fenley precision doesn't fuck around. I will be getting their HX-35r as my high pressure charger in my compound setup and probably put it over a S480. I haven't quite decided between the 475 or 480.
@@austinwlock I have a HX35 & S475 setup and I love it! Just make sure not to boost over 60psi unless you fire ring the head and install ARP or Xotic head studs
I’ve got a 1990 ve pump with an hx35 on it right now. No pump / fuel mods - what it cost for me to grab one of these? I’m auto trans built hughes converter (swapped in Chevy)
This was a gen 1 hx35-r.. we have replaced it several times over making it better. It’s more quiet now. The loudest charger I have is my 60/67/12 over all
Fleece Cheetah turbos make that sound. I have an he351cw on my 2000 with turbo labs 67mm exhaust housing/wheel-shaft and it screams like that. Not going to lie, I did it entirely for that beautiful sound
@@Doicus.dreams to get the sound you need to go to a bigger exhaust wheel. You could keep the factory inducer but foe the amount you will spend in machining and the turbine might as well go bigger on the inducer to create a more balanced turbine assembly under boost.
It’s very close yes! My closest unit sound wise to this is my 60/67/12 with race cover. I need to post videos of the 67/67 r. I will start working on that :)
I used to burn this video up listening to it. I finally got to build a cummins powered truck a modifiy my own turbo. This was the result 😂 czcams.com/users/shortsL1U4iVWWa3I?si=ktjLTvdJq48VkgfV
Who needs a radio when u got a 12 valve?!
Every time I turn my radio on I end up cutting it back off to listen to the truck 😂😂
Facts brother
True
Who needs a woman when you got a blow up doll ? Lol
Or a 24 valve
nice to see one of these trucks running clean and actually pulling something
Mine does dude.. I got a 00 Dodge diesel and doesn't smoke it all, not even at full throttle.. that's what I like
@@ricardojuarez291 your truck must not be running then
@@blaynespires3638 hahahaha
@@ricardojuarez291 what do you have done to it? Most of the pre-common rail trucks will blow some smoke even 100% stock under the right conditions
@@wyattlewis8671 mine doesn’t either
Hx35, 5in straight pipe, S&B intake, TS MVP Tuner and Fass 165GPH
This video was my inspiration for my turbo. I built a 60/67/12 out of the stock hx35 I had. Tried it out today. Sounds exactly like your's. Best sounding turbo I've ever heard. Also 250* cooler egt's, less smoke and more powerrrr!
Right on!
Damn that truck sounds just like my old 12 valve
I know this is an old video man, but what size goose is that and are ya happy with it? Any complaints?
I drive a 95 ford f250 7.3 powerstroke I don't ever listen to the radio much I love hearing the engine and turbo
How much was the whole set up sir?
How much boost does this setup make? Also what egts do you see towing? Sounds awesome.
C Wag 63psi at the manifold. Egts stay in check towing.
@@gmoney1948 Is this a setup that you created?
@@gmoney1948 out of an hx35?? Damn!!
@@jonathonlesko3554 fenley precision doesn't fuck around. I will be getting their HX-35r as my high pressure charger in my compound setup and probably put it over a S480. I haven't quite decided between the 475 or 480.
@@austinwlock I have a HX35 & S475 setup and I love it! Just make sure not to boost over 60psi unless you fire ring the head and install ARP or Xotic head studs
Where do I get one of these turbos?
Sounds like a jet engine
Is that a 60/67/12?
What’s exhaust setup
Is it just the turbine wheel that’s been replaced? I’d love for my cummins to whistle something like this
1996_12valve this is a custom t4 6cm turbine housing. One of only two that I know of. I will have it’s second twin up for sale very shortly.
@@gmoney1948 What do I have to do to put it on my 12v and sou d just like yours?
I sell chargers. Check out my Instagram Fenley precision inductions. I can get you setup for sure.
@@gmoney1948 cool thanks for responding. In a few years ill do that. Don't have a 12v yet but saving up!
@@gmoney1948 and how much money are we talking too
I’ve got a 1990 ve pump with an hx35 on it right now. No pump / fuel mods - what it cost for me to grab one of these? I’m auto trans built hughes converter (swapped in Chevy)
Is it still non intercooled?
@@gmoney1948 Yes sir
Yo, 3.65 a gallon for gasoline. Say it ain't so! Nice video by the way!
Which model HX35 is this?? Looking at the HX35r to replace my compound setup. Sounds mean!
This was a gen 1 hx35-r.. we have replaced it several times over making it better. It’s more quiet now. The loudest charger I have is my 60/67/12 over all
What set of wheels are you using
Vision 19.5”s
Where are you in the 209? I'm in Turlock.
Modesto
@@gmoney1948 Good deal. Your turbo and exhaust note sounds awesome. I have two 6.0's, both running 10 blade turbos.
@@andrewb9708 I’m in turlock too and looking into a 6.0, what years are they and how do you like them?
@@shanep7027 An 05 F-250 and an 04 E-350 van. I love them
Where can I get this turbo built for my cummins?
Checkout and PM Fenley precision turbos on FB or Instagram
What’s the size/specs of the turbo I want one just like it
Fleece Cheetah turbos make that sound. I have an he351cw on my 2000 with turbo labs 67mm exhaust housing/wheel-shaft and it screams like that. Not going to lie, I did it entirely for that beautiful sound
Its the 67mm exhaust turbine that gives it the whistle
Can I get this sound on my 91 d350 without going to a big turbo. I dont want more boost just efficiency and the sound
@@Doicus.dreams to get the sound you need to go to a bigger exhaust wheel. You could keep the factory inducer but foe the amount you will spend in machining and the turbine might as well go bigger on the inducer to create a more balanced turbine assembly under boost.
@@Garfieldcrf450 knew i wasnt the only lol
Is this the stealth turbo?
No, this is a Fenley turbo. Not stealth, not fleece.
Does this turbo have the race cover?
This was a generation one hx35-r. It did not have a race cover.
@@gmoney1948 what are the benefits of a race cover on one of these turbos
Sound like a Peterbilt!
😂
Cummins sounds like a cummins
Peterbilt actually use Cummins too
Will their 67/67 hx35-r
sound like this?
It’s very close yes! My closest unit sound wise to this is my 60/67/12 with race cover. I need to post videos of the 67/67 r. I will start working on that :)
@@gmoney1948 I was gonna order a turbo but it wouldn't ship to Canada:/
@@TheCrowsRoute shoot me a message on my Instagram @ Fenley precision turbo I do, however I have to invoice them different.
@@gmoney1948 does fb work I don't do Instagram
@@TheCrowsRoute yessir
I used to burn this video up listening to it. I finally got to build a cummins powered truck a modifiy my own turbo. This was the result 😂
czcams.com/users/shortsL1U4iVWWa3I?si=ktjLTvdJq48VkgfV
Any turbo will whistle like that if you remove the silencer ring just like in the video that's all they did is remove the silencer ring
no stock hx35 is going to sound like that
Removing a silencer ring wont get you that crisp of a whistle out the exhaust, it just makes more of an intake wooshing sound up front
no it will not