How to strip down the scuttle on the front of your van and then seal it. This will stop water ingress into your engine and prevent your diesel injectors from seizing.
I couldn't for the life of me get mine off. Then I realised there's one bolt near the drivers side that holds the cabin air filter thing to it. Once I'd got that off it came off easily. Very helpful video.
Great vid thanks, will be doing this today. bought a vivaro a few weeks ago, No 2 injector wasnt sealed, chuffing through, they had stripped the thread out of the clamp, re tapped to m10 fine and made a bolt on a lathe, they had cut the thread on that wonky, i re tapped the thread to m12, and made a stainless insert to take it back to m8, i then found they had cracked a hole in the top of the cam cover while trying to remove the injector and plugged it with chemical metal, luckily i ally weld so cleaned it up, welded it up with the engine in situ, its all back together now and seems fine so far!
Perfect, perfect, perfect. Just done mine this morning (14/07/21). Nice easy job, all finished and cleaned up in less than 45 minutes. Thank you so very much for the excellent video 👍
Great video really easy to follow thank you ...you just made me do a job on my van I’ve been putting off since I bought it 2 years ago the hardest part was cleaning off the old crap seal they put on in the factory...cheers
I knows vids 3 year old but my van just git the injection and emissions come up and the red stop light so this teusday the weather is gona be nice so gona do this to mine before i have any work done. Just had a new dpf fifted but dont think the machanic deleted all the error codes so the new dpf as blocked up again, but hopefully ile get to the bottom of it without too much money spent. Thanks for the vid
If the dpf has blocked in such a short time it might be worth getting your glowplugs checked, as if they aren't working correctly your engine won't go through a self clean. It's a thing that's regularly missed.
Hi on the timing chain, my oil pump chain was quite flimsy, as a recommendation chain that at the same time when fitting the timing chain because if that goes the engine will stop from lack of oil to the top end. Thanks Ian
Thanks for this. Now that I've done this, is there anything else I can do to make the injectors easier to remove in the future? Any sort of oil that I can soak on top of the injectors? I don't need them out now but thinking of the future
Great video..bought an 11 mint vivaro with top broken off injector as day van project..waited for rain and was shocked to see how much water flowed out of the centre into the head..previous idiot owner broke injector top and left it outside for a year with leaking scuttle😢😢 all four look proper rusted...reckon 2nd hand engine be easier 😂😂
Great video, thank you... one thought though... removing the drainage pipes that run down to the inner wings seems like a good idea, however, isn't there an ECU or something almost directly underneath the hole on the passenger side?
Great video. Will get onto this asap after just buying a 2013 trafic 2.0l with 170k… So I understand water gets onto the injectors, but the vans running perfectly fine, are you saying when/if the injectors fail for whatever reason a mechanic will struggle to remove the old injectors to replace? Would you recommend changing the injectors post this mod? And are you still in business for injector replacements?
Thanks Steve. Yes exactly, I offer the removal service exactly because most garages would be unable to remove them. My website is southwalesinjectorremovalservice.co.uk. I am definitely still in business.
Great video - will get mine done! That rectangular hole in the bulkhead to the steering column, did you have something removed or is there normally a hole straight through?
Did you remove the original foam on the scuttle and replace with sealant or did you leave the foam for added protection? Would the foam still saturate and leak?
Hey. Thanks for this video. This was so helpful! With regards to those two drainpipes you said you didn't put back on that drain from the scuttle down in to the front wings, are there any downsides to that? Doesn't increase the chances of corrosion? I'm asking because I've gone to put mine back on but they're rock solid so they actually don't channel the water, they just leak! Thank you 😊
No that won't work. Put grease when outting in new injectors, but if the injectors are already in, there's nothing I've found that will help to release them.
Hi, great video. Just carrying out job now. I noticed when taking everything apart that the second plastic panel you removed is missing from mine. My top plastic scuttle is slightly different to with some holes in showing threads that the second plastic cover seems to sit in with push on covers. My question is are all skuttles the same and am I missing that panel or are there different mods. My van is a 2011 2.0 115. Thanks in advance.
Could water getting onto the engine bay damage that maf? When it rains heavy my van doesn't want to start for a while then has low power untill it's warm
Engine can start without the MAF connected. So, logic tells the MAF shouldn't be the main responsible for those symptoms! ;-) Although your description would lead me straight into earth cables. On battery and specially the earth strap on the gearbox...In fact ANY earth cable being clean and in good condition is a good way to keep things going well! ;-)
Silicone is a much more reliable and long-term sealant in compression than it is just stuck to a surface, so taking it off so that you can squash the seal will be much more reliable in the long term. An external bead will work for a while - maybe even quite a long time if the surface it applied to was nice and clean. These days I only ever use silicone in compression or because I need colour matching. For almost any other case modified silane sealants are better now.
A great advert for your services while also helping us owners.
Thank you. 👍
I couldn't for the life of me get mine off. Then I realised there's one bolt near the drivers side that holds the cabin air filter thing to it. Once I'd got that off it came off easily. Very helpful video.
Great vid thanks, will be doing this today. bought a vivaro a few weeks ago, No 2 injector wasnt sealed, chuffing through, they had stripped the thread out of the clamp, re tapped to m10 fine and made a bolt on a lathe, they had cut the thread on that wonky, i re tapped the thread to m12, and made a stainless insert to take it back to m8, i then found they had cracked a hole in the top of the cam cover while trying to remove the injector and plugged it with chemical metal, luckily i ally weld so cleaned it up, welded it up with the engine in situ, its all back together now and seems fine so far!
Great video, I also put sealant behind the plastic scuttle were it touches the window.
Perfect, perfect, perfect. Just done mine this morning (14/07/21). Nice easy job, all finished and cleaned up in less than 45 minutes. Thank you so very much for the excellent video 👍
Thanks for the video. It's helped me get to my wiper motor to fix it after heavy snow.
Great to hear!
This is my next job on my day off ... can't wait 👀😄
Thanks for the video ! Did the scuttle on my trafic today, great instructions and easy to follow.
Hi Paul, I have a traffic Mk2 what I am going to attempt tomorrow. Was this video similar to a traffic?
It would be the same from 2000 to 2014
@@southwalesinjectorremovals8932 excellent mate. Great video
Great video really easy to follow thank you ...you just made me do a job on my van I’ve been putting off since I bought it 2 years ago the hardest part was cleaning off the old crap seal they put on in the factory...cheers
Excellent just what I was looking for, thanks a ton.
Great video so easy to watch helpfull and instructive
Glad it was helpful!
Brilliant video, done my 11 plate this weekend. Very easy! Thanks 👍
I knows vids 3 year old but my van just git the injection and emissions come up and the red stop light so this teusday the weather is gona be nice so gona do this to mine before i have any work done. Just had a new dpf fifted but dont think the machanic deleted all the error codes so the new dpf as blocked up again, but hopefully ile get to the bottom of it without too much money spent. Thanks for the vid
If the dpf has blocked in such a short time it might be worth getting your glowplugs checked, as if they aren't working correctly your engine won't go through a self clean. It's a thing that's regularly missed.
@@southwalesinjectorremovals8932 I know mate I'me just woried it's the injecters 😱
Brilliant video did my 2008 van this morning no leaking onto engine now 👍
Brilliant video! Thanks.
Excellent video.
Thanks Sam hope it helps
Great video just followed it to do mine thank you 👍🏻
(Just bought Vauxhall ) vivaro Slightly different on the 2008 I'm thinking . Great and easy-to-follow video thanks
Great video, Cheers..... Thats now my plan for tomorrrow. Better that the duct tape stopping my air filter filling up with water!
Cheers for the tutorial, I have a 2014 plate I'm yet to do mine 🍻cheers
Brilliant video, thank you so much.
Very informative thankyou 👍
Nice thanks so much for posting this Ile be doing mine the next fine day we get 👍👍
Perfect video thank you
Very helpful video, thank you 👍
Hi on the timing chain, my oil pump chain was quite flimsy, as a recommendation chain that at the same time when fitting the timing chain because if that goes the engine will stop from lack of oil to the top end.
Thanks Ian
many thanks from France
Great , video , just done mine , easy to follow
Thanks
Awesome help
Brilliant video, doing mine tomorrow 👌👌👍
Hugely helpful, thank you!
Very helpful! Good job 👍🏼
Great video, very informative
Thanks. Great video
Thanks for this. Now that I've done this, is there anything else I can do to make the injectors easier to remove in the future? Any sort of oil that I can soak on top of the injectors? I don't need them out now but thinking of the future
I gather this is Vivaro/Trafic/Primastar/Talento vans 2001-2014, but what does 'TVP' stand for?
Trafic-Vivaro-Primastar
@@mattnewfoxred Doh!
Dziękuję
Great video..bought an 11 mint vivaro with top broken off injector as day van project..waited for rain and was shocked to see how much water flowed out of the centre into the head..previous idiot owner broke injector top and left it outside for a year with leaking scuttle😢😢 all four look proper rusted...reckon 2nd hand engine be easier 😂😂
They're a nightmare to be honest, 2010 onwards injectors are made out of the same material as Ford Transits you can literally watch them rust.
Thank you!
Thanks a lot!!!
Great video, thank you... one thought though... removing the drainage pipes that run down to the inner wings seems like a good idea, however, isn't there an ECU or something almost directly underneath the hole on the passenger side?
Yeah I thought that. Did you remove yours?
@@gingers1united I ended up keeping my drainage pipes, but check them for blockages regularly.
Great video. Will get onto this asap after just buying a 2013 trafic 2.0l with 170k…
So I understand water gets onto the injectors, but the vans running perfectly fine, are you saying when/if the injectors fail for whatever reason a mechanic will struggle to remove the old injectors to replace?
Would you recommend changing the injectors post this mod? And are you still in business for injector replacements?
Thanks Steve. Yes exactly, I offer the removal service exactly because most garages would be unable to remove them. My website is southwalesinjectorremovalservice.co.uk. I am definitely still in business.
Great video - will get mine done! That rectangular hole in the bulkhead to the steering column, did you have something removed or is there normally a hole straight through?
The blower motor unit had been removed that why you can see the big hole
Did you remove the original foam on the scuttle and replace with sealant or did you leave the foam for added protection? Would the foam still saturate and leak?
Hey. Thanks for this video. This was so helpful!
With regards to those two drainpipes you said you didn't put back on that drain from the scuttle down in to the front wings, are there any downsides to that? Doesn't increase the chances of corrosion? I'm asking because I've gone to put mine back on but they're rock solid so they actually don't channel the water, they just leak! Thank you 😊
Sorry about the delay. No there's no downside to leaving them off at all. The water channels away from all the essential parts.
Great video cheers. Is it worth putting some wd40 or something on the Rocker cover to lube the injectors up for the future? Cheers
No that won't work. Put grease when outting in new injectors, but if the injectors are already in, there's nothing I've found that will help to release them.
Hi, great video. Just carrying out job now. I noticed when taking everything apart that the second plastic panel you removed is missing from mine. My top plastic scuttle is slightly different to with some holes in showing threads that the second plastic cover seems to sit in with push on covers. My question is are all skuttles the same and am I missing that panel or are there different mods. My van is a 2011 2.0 115. Thanks in advance.
Yes they are all the same if you don't have the second panel then it is missing.
@@southwalesinjectorremovals8932 thanks for letting me know. Appreciate it.
Great video. Is this fault only on certain models? I have a 2005 1.9 vivaro will I need to seal ?? Thanks
It is a problem with all tvp from 2001 to 2014
"intercooler flap has broken off" lol what? You mean EGR flap?
This the same procedure on a 2016 ducato
Could water getting onto the engine bay damage that maf? When it rains heavy my van doesn't want to start for a while then has low power untill it's warm
Engine can start without the MAF connected. So, logic tells the MAF shouldn't be the main responsible for those symptoms! ;-)
Although your description would lead me straight into earth cables. On battery and specially the earth strap on the gearbox...In fact ANY earth cable being clean and in good condition is a good way to keep things going well! ;-)
Where are the glow plugs on 2007 vivaro
Front of the engine behind the throttle body and egr
Sorry, but why take it off? just seal along the top job done
Thats all I did, bead of sealant between metal part of scuttle and van body
Silicone is a much more reliable and long-term sealant in compression than it is just stuck to a surface, so taking it off so that you can squash the seal will be much more reliable in the long term. An external bead will work for a while - maybe even quite a long time if the surface it applied to was nice and clean. These days I only ever use silicone in compression or because I need colour matching. For almost any other case modified silane sealants are better now.