How is the plow holding up? The push plates holding up ok that you installed underneath? And do you remove the push bracket for riding season to prevent any damage and leave the first plate on? And where did you order the plow from? Thanks…
exactly right, its a two part plate system, the one that sits fairly flush with the skid plates has threaded holes that you bolt the actual push plate too. so far so good!
Just installed a 72” kFI poly on my 900s. Rzr. Plowed once. 4” of heavy wet stuff… I added a pvc pipe to the cutting edge. So nice all my plowing is on dirt. I was impressed on how well these machines do!!! Thanks for your video and input. Happy New Year!!!
Did you have to beef up the suspension at all?
How is the plow holding up? The push plates holding up ok that you installed underneath? And do you remove the push bracket for riding season to prevent any damage and leave the first plate on? And where did you order the plow from? Thanks…
exactly right, its a two part plate system, the one that sits fairly flush with the skid plates has threaded holes that you bolt the actual push plate too. so far so good!
Just installed a 72” kFI poly on my 900s. Rzr. Plowed once. 4” of heavy wet stuff… I added a pvc pipe to the cutting edge. So nice all my plowing is on dirt. I was impressed on how well these machines do!!! Thanks for your video and input. Happy New Year!!!
How do you adjust the angle of the plow?
There is a spring loaded hand that you pull when the plow is raised. Simply pull the handle and push the plow to the angle you desire!
Lock tite not required on the bolts?
That is correct, comes with nylon lock nuts!
🤓