You have to do the math and geometry... I built this table from the ground up... I'm pretty proud of it, check it out if you don't mind... czcams.com/video/TR-RhxH8wcs/video.html
You need to stretch that felt when you cover the rails and bed.. Otherwise the felt will move around when you place your bridge hand down on the bed, and the rails won’t play properly.. Also, you need at least one shim on each pocket facing to keep the rubber from expanding over time from moisture.. That makes the pockets play phony..
@@2869may It will bow over time, without a shim.. making the pocket play phony.. Now, I’m not an engineer or a scientist, so maybe it’s contracting?.. I don’t know.. That was an assumption on my part.. I apologize.. However, I have plenty of experience in all things pool, and in my experience one shim is best.. Some double shim, but I prefer extended rails and one shim..
Me encantó felicitaciones, si me podrías decir las medidas de las maderas que usaste para hacer las bandas , te agradecería,, excelente trabajo , bendiciones
15 degree dapat sinunod namin. kaso tumatalon pa bola sa banda kaya adjust kami to 20 and then 25. so hinanap ko yung okay bounce ng bola na hindi tatalon. trial and error. May factor din size ng bola at height ng railings. Medyo mababa kasi railing namin below 2inches.
yeah well..you can't..it's impossible..even tables made by engineers in factory can only have % surface flatness to level at best..talking about albastar or whatever slates chiseled by computer driven machines to be as flat as possible..how flat can the surface be in ones made at home up of bendy wood boards :/..you can't DIY a billiard table..
That is hardcore handsaw work. Well done!
Hello ,measurements of the woods for the bands please, thank you
Buen trabajo! Te agradecería mucho si pudieras dar las medidas de la mesa
Ang galing mo sir sana meron kayo list of materials pati sukat 😊
Wish u could explain what you r doing
Ang ganda poh ksi ng pag ka2gawa nyo pang re2galo kupu sana sa anak ko😊
where you bought the bumper cushions?
Hi, can you please tell me where you got all the stuff from? Please. I am building one for my son and so it would be great if you could help.
Hi there, Great JOB!!, could you please detailed all the measurement here?
Show 👏🏻👏🏻👏🏻👏🏻
What kind of plywood
Thank you amazing
Buenas noches no me diirias que medida tiene la madera que va pegada la goma muchas gracias
Where do you find the template for making corner pockets?
You have to do the math and geometry...
I built this table from the ground up...
I'm pretty proud of it, check it out if you don't mind... czcams.com/video/TR-RhxH8wcs/video.html
Any pattern size model for sharing, please?
u skipped the most important part. how u cut the wood bumpers. ?like degrees needed ?
👍👍👍
You need to stretch that felt when you cover the rails and bed.. Otherwise the felt will move around when you place your bridge hand down on the bed, and the rails won’t play properly..
Also, you need at least one shim on each pocket facing to keep the rubber from expanding over time from moisture.. That makes the pockets play phony..
Rubber expands from moisture....?
@@2869may
It will bow over time, without a shim.. making the pocket play phony..
Now, I’m not an engineer or a scientist, so maybe it’s contracting?.. I don’t know.. That was an assumption on my part.. I apologize..
However, I have plenty of experience in all things pool, and in my experience one shim is best.. Some double shim, but I prefer extended rails and one shim..
@@jacobjones5269 No need to apologize brother... Check out the table I built in my videos, turned out pretty good.
@@2869may
I saw the first vid.. Yeah, nice work..
@@jacobjones5269 Thanks man.!
ikaw lng ba gumawa nyan sir sa stick na naka angle cutting pra sa rubber ng bandahan o meron moulding nyan na mabibili?
hola, ¿puedo saber qué es la cosa de goma que pones a los lados que hace que la pelota rebote?
That is cushion or cushion rubber
Boss kailangan ba straight Yun butas sa gilid
what magic happen from @14:42 to @14:45 ?? Where did the staplers go?
they turn upside down first before stapling
They are cousins of legendary efren bata reyes, and yes they also have magic😅😂
What kind of plywood you are using ma'am/Sir plzz reply God bless you po❤️
Hello👋🙋♂️ there🌻👍
Amazing and very interesting project video🎥👍👍👍
Super like👌👌👌
Do keep posting
Warm regards and best👍💯 wishes
The UnknownManCub 👍😎👨🏭
list of material please
God job
Me encantó felicitaciones, si me podrías decir las medidas de las maderas que usaste para hacer las bandas , te agradecería,, excelente trabajo , bendiciones
Thankyou
Hi sir subcriber nyo ako ano mga size ng ball at yung rails paki details sir ang ganda ng gawa nyo
Why don't you specify the lengths of the pieces?
Sir saan mo na bele ung material neyan
BOSS PWEDE MHINGI BILL OF MATERIALS NYAN, TSAKA MGA SUKAT.. SALAMAT PO.
It took several hours to complete.
Boss Ang ganda Po NG pagka gawa mo tanong kolng boss magkano Po lahat lahat n gastos nyo Po Jan salamat sapag sagut
Written instructions please
Buenas noches me podrías apoyar con la medida de los orificios para las buchacas plis
Sana mga sir meron kayong measurement ng billiard table,saan po sir nkkabili ng mga accessories like bouncing rubber
Boss lagay mo din sukat ng lhat
Boleh bagi ukuran??
Magkno po magpagawa ng ganyan?
Anong sukat ng bola nian boss?? Salamat! 😇☺️
MAG KANO PO BILI NYO SA BANDA??
Ask kolang po sana anong size ng table and ung billiard ball pati ung guma sa banda?☺
42x74 inches size ng table. 2inches ball size. Goma is standard size
Como faço para saber essas,medidas dos pés. Por favor.
Boss anong mga sukat yan boss
Yung kapal ng kahoy sir ano sukat Ang ganda ng pgkagwa
3/4 Marine Plywood sa top base at mga support/paa. 2x3 and 2x2 sa Top rail at bandahan.
Ano po ba sukat Ng circle Ng biliaran po ?
Magkano boss ganyan kalaki
Good day sir . ano po size ng pocket ?
ano tawag sa goma na banda lods?
Billiard Rubber Bumper or Cusion po
anong po pangalan ng ginamit mo na pangdikit sa rubber sir??
Greco. strong adhesive. Sa shopee or lazada maoorder boss
Anong kapal ng legit na ginamit mo boss sa bandahanmo
2x2 lang boss hinati ko lang gitna 25 ang angle. Yung Top rail naman 2x3 good lumber yung tama.ang sukat hindi undersize.
Salamat sir Ang gnda ng pgkagawa
magkano kaya po nagastos nila?
Salta mucho la bola pierde rebote
At least Sana may measurements sir para ma estimate yong materials na gagamitin especially sa Plyboard..
Palagay naman ng mga sukat..please
Boss pwd ba magpagawa sayo ?
🎱🎱💶💶💶💶💶💶
boss pede pa share ng size ng billiard table at mga pockets tnx sa reply
pwede po pa share mag kano po lahat ng nagastos nyo?
Sir mag kano pagawa ng mini billiard sa inyo
Anong size ng bola mo sir?
42x74 table size. Ang ginamit ko po 2inches size biiliard ball.
How about ung angled wood rail for cushion? Ano size wood and angle sir? Or tancha lng? Haha
15 degree dapat sinunod namin. kaso tumatalon pa bola sa banda kaya adjust kami to 20 and then 25. so hinanap ko yung okay bounce ng bola na hindi tatalon. trial and error. May factor din size ng bola at height ng railings. Medyo mababa kasi railing namin below 2inches.
Sige sir. Thank you. 🤗
The details of measurements and type of wood and tools needed are all given in the music 😒
Pwdi malaman mga sukat nya sir salamat
Sir may materiales na ako pero di ko alam ang sukat pano mg start..junior billiard lang po..thank you.sana matulungan nio ako
pwede po ba malaman dimensions niya sir
Bat hinde marble gamit
yeah well..you can't..it's impossible..even tables made by engineers in factory can only have % surface flatness to level at best..talking about albastar or whatever slates chiseled by computer driven machines to be as flat as possible..how flat can the surface be in ones made at home up of bendy wood boards :/..you can't DIY a billiard table..
Are you blind? 😂😂😂😂😂 Wtf
@@MrErickMesquita lol filter