Raspberry Pi 4 surveillance security system with PIR motion sensor and pi camera
Vložit
- čas přidán 13. 09. 2024
- Raspberry Pi 4 based surveillance security system with pi camera, PIR motion sensor and python 3.
SD card formatter:
www.sdcard.org...
Raspbian OS:
www.raspberryp...
Python source code:
gist.github.co...
Raspberry Pi network configuration steps, after writing raspbian image into micro sd card:
1. create a file named “wpa_supplicant.conf “ with below contents into micro sd card:
country=CH
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
network={
ssid="YOUR_NETWORK_NAME"
psk="YOUR_PASSWORD"
key_mgmt=WPA-PSK
}
2. Create another blank file named “ssh” into micro sd card.
raspberry pi 4
raspberry pi camera
raspberry pi surveillance system
surveillance system
raspberry pi 4 projects
raspberry pi 4 setup
smart surveillance camera
smart security with raspberry pi
PIR motion sensor with raspberry pi
diy surveillance camera
raspberry pi
how to build surveillance system
cctv camera
motion detection
Raspberry pi motion detection
raspberry pi 4 gaming
raspberry pi camera module
raspberry pi camera
raspberry pi camera projects
raspberry pi camera
I'm so stress when I did project. Finally, I can complete it. Thank you so much for detail information!
Great video. Thank you for your excellent explanation.
You've helped me to finish my project with this video, thank u so much!!
Nice to hear that...
@@ASTechWorkshop
Sir I am working on 2 projects for which I am referring ur channel,
I have some doubts related to raspberry pi Ram so please can u give me ur contact or social media I'd so that I can clear my doubts, kind request
Thank you very much for your detailed tutorial. It can be hard, but you made it sound very simple.
Thank you for the video tutorial. Very helpful and was able to make and present our course project.
Thank you so much for this tutorial. It helped me to done my school project very short time .....
thankyouuuuu. i want to give a thousand likes!!!
THANK YOU SO MUCH MAY GOD BLESS YOU... YOU LET ME FINISH MY PROJECT
Very creative and knowledgeable dude! Amazed !!
Such a great video. He explains like a charm!
Very informative nicely elaborated each and every step with detailed explanation
Well done 👍
Awesome description very simple. Good work
Thanks for your comments...
Well documented & presented ..
Wonderful tutorial. What can be done to automatically have automatic light on? Any recommendation on some switches and Light Bulbs which can be connected to Pi? Also, the latest Pi 4 have fan installed, where camera will be connected in that case? Can I still push it despite having fan as long as I see its slot? Is there any impact on the fan?
Sir can you tell how this can be merged with Android app
Great video man. Thanks for sharing.
the hardware schematic shows data connected to ground not pin 11 (which would be 6 from the top)
thank you from sharing a tips surveillance bro
This was a very informative video and a fun project. I do have a couple of questions. I tried to modify the code so that it doesn't send the email, but instead saves the .h264 file. But it will only rename the .h264 once, then every other file afterwards doesn't get saved. Also, does the email part of the code even still work now that Google disabled the allow less secure apps feature?
A very awesome project and commendable. But the issue I encountered is that the camera keeps on capturing videos without even waiting for the sensor to trigger it before capture. Please help me out bcos I supposed overcome it please 🙏
wow am shocked what a project 👏🏻👏🏻😍
I enjoyed the video...thank you for creating it. In regards to discovering what the IP address of the Raspberry PI is, why don't you just open a terminal on the PI and type in ifconfig? That will instantly tell you it's IP address and you won't have to go into your router. Thanks again for a nice video.
If u have dhcp enabled, and u power on the pi, some time it will assign random ip address. If it does then u have to get the rpi assigned ip from router in order to open shell..
Hi, really nice video! thanks. Could you also do a video about a more complex setup involving multiple PIRs, no cameras (or optionally), but other outputs to enable automations? Like when PIR detects motions it activates SMS/email notifications or sounds a buzzer etc. Basically a multiple inputs/outputs setup.
Also, would be great to have insights on how to integrate such a home alarm setup into Home Assistant...
Working on that
@@ASTechWorkshop will be waiting for it!
Good information
Informative and inspiring
Great job! I am planning similar project. May I ask how long is the gap between PIR detects motion and camera starts recording?
Its almost immediate...
How to draw schematic diagram...
Which tool used you sir..
Brilliant
#shanabbasiurdu
Nyc and dn
Can this project can be done with raspberry pi 4 with 1 gb RAM?
Thank you for this rich video, brother for my case I rather have a usb camera would it be possible for me to take over this project? or will there be items to add or install?
Check fswebcam python library for usb webcam
@@ASTechWorkshop Ok thank you very much
@@alainvihumbira8354 have you been successful ?
@@Bismaverdyaadhika Tried researching this but couldn't find a better way to match it with yours, but recently I was wondering if maybe we could use opencv as well, what do you think there- above or can we consider another solution
Is it okay if I dont use the bread board ?
Tq 4 information
Informative
Very informative video👍
Really a great video..!
Very informative
Very nice👍👍
How to supply electricity to raspian module
I’m beginner pls help
Hello I want to talk with you I need your help for my project.
Very nicee 👌👌
how can the project work on the raspberry pi without using mobaxterm command
What will happen when we use normal webcam instead of raspberry pi cam
HELLO THANK YOU SO MUCH FOR THIS, HELPED IN MY SCHOOL PROJECT, HOW CAN I ADD AN AC LAMP TO THIS FOR A COMPLETE HOME AUTOMATION SYSTEM?
For accessing ac lamp, first u need to access raspberry pi gpio pins. U can then add a 5v relay to any of the rpi gpio. Set snd reset the gpio pin from the code just like u sending email.
tutorials-raspberrypi.com/raspberry-pi-control-relay-switch-via-gpio/
@@ASTechWorkshop thank you so much, I would do that. then how do I combine all of this to a single webpage whereby I can put off and on the lamp through a toggle switch? I'm very new to programming
Its very helpful
Thnks for sharing
Thank you
Hi how far can the motion sensor detect?
Very inspiring
sir what if we want to add some more machine learning module into this project like object detection or facial recognition
Yes u can extend this project with more modules...
Gd information 👌👌
Hello, thank you for this hard work and good Video. I did everything step by step, but unfortunately that didn't start my pi camera . I have a Raspberry Pi 3 model B +, and i have tested the other code in camera its ok
plz guide me my motion sensor work fine other code, i guess its some problem in camera capture fuction
plz tell me
I would suggest u to test the camera function separately... Write down the basic python code for capturing video first.. if u get the success, then include other module like motion sensor and email system..
nice video, please how did you copy ur python file from window to raspberry pi?
U can use a tool named WinScp.. this an FTP tool, where u need to connect ur rpi and transfer files from local machine.
How the real image compare with stored image
Liked
Subscribed
Thanks
Well done
Hello, thank you for this nice Video. I did everything step by step, but unfortunately that didn't work. I have a Raspberry Pi 3 model B +, can it be that the Problem from that !?
It should not be... it should work on rpi3 as well.
@@ASTechWorkshop it's working now, thanks.
Nice job bro
because if i disconnect mobaxterm from raspberry pi the project stop working
U need to run the program at background not in current shell.. watch the end part of the video for ruuning the python program at background..
have you ever made a GUI for a PIR motion sensor ?
What purpose GUI will serve here?
Ok bro great
Excellent video. You have clearly explained everything ,in easy to follow steps. Thanks. I was able to complete the project easily with minor issues which i faced, but then i referred back to your video i corrected the errors.
I want to make a small addition, wherein once the PIR sensor detects a motion i want to also trigger another python script called warninglamp.py. this code switches on a warning LED connected to a gpio pin and LED remains on during the motion and then should stop when motion is not there. How can i call the warninglamp.py code from within your code to start and stop. your help and guidance will be appreciated alot. Thanks
U can import ur python file and call the start/stop method... as the pir detection is very swift, so it would be good to on the led for some sec, when motion detected....otherwise u will not realise the led was on..
Nice video.
Hi Brother,,,I have a question...If let say i wanna upload that video to my local server (which i created from Flask app) so that, we can login to that server and view it or download the video,,,how the coding will be brother??? And can i use USB webcam instead fr the coding u posted??? Thankss!!!
Instead of sending the video file as a mail attachment, u can copy thie file to an ftp server.. u can use scp unix command from python os library to copy file. For usb webcam u need to use a separate python library...
Good
good job
Good job
Nice
How to add auto notification to telegram ?
Sir, is that MobaXterm SSH Client is a toolbox that we have to download or will it be inbuilt on our windows?
U have to download it...
@@ASTechWorkshop ok sir
@@ASTechWorkshop sir, we are not able to install picamera module, is there anything we can do to so that I can import that module. If so, please let me know sir
what if the camera and my phone is connected in 2 different netwrok?
This system will send u email, so u can see the video from any network..
This system will send u email, so u can see the video from any network..
Good job bro
Hard work
Can I use any pi camera for this?
Yes
can i add an LDR sensor and a lampe on program
Yes u can..
I'm stuck at the last part of this project. Can anyone help me? :((
good :)
Will this work with rpi 2?? Pls reply I am new at this.
Yes
How do i copy the python file to my raspberry pi? Sorry i m new to this.
U can use a software named winscp... this is an ftp file transfer tool.. connect ur rpi ip address in winscp and start moving files from ur desktop.
thank you!
😙👌
Nice video
can I use USB Webcam
Yes
How costly the project turned out to be?
Its roughly about $80
done
Hello sir how to add a buzzer to this
Add a buzzer to any free gpio pin in rpi.. in the code add an action method for triggering buzzer, just like sending email function.. check this link for controlling rpi gpio from python --> www.ics.com/blog/control-raspberry-pi-gpio-pins-python
@@ASTechWorkshop thank you sir
@@ASTechWorkshop Sir can we create with raspberrypi zero w,
For Raspberrypi zero w
Will the pin number, code and os be the same
Thank you
can i use a different OS ?
Yes... u can as far as the logics are same...
please i need help how to copy python code i didn't get it
U can use a software named winscp... this is an ftp file transfer tool.. connect ur rpi ip address in winscp and start moving files from ur desktop.
@@ASTechWorkshop can you give me your e-mail or your facebook or whatsapp acount i need some help
my raspbian has only "legacy" mode for camera interface
7:41
please i need help i'm new here
17:14
sir u given wrong code on GitHub
How did u find it wrong, could u pls explain. I uploaded the same code what I used and worked.
Informative
good information
Good job
Nice video