FINISHING the 300cc Grom Swap!! FIRST START UP!!
Vložit
- čas přidán 6. 09. 2018
- The motor finally got dropped into Dom and we took him for a spin and WOW!!!!
Thanks for dropping by! Don't forget to hit that subscribe button and turn notifications on!
✩ MERCH - www.teespring.c...
✩ INSTAGRAM - / itsjusta6
✩ SNAPCHAT - itsjusta6
----------------------------
✩BECOME A CHANNEL MEMBER BY CLICKING HERE: / @itsjusta6official
---------------------------- - Auta a dopravní prostředky
The Grom is basically wrapped up, which means I'll be trying to focus more on Mustang and Truck videos for you guys! The Mustang has taken a short break to relax but it's about to be back and banging gears better than ever!!
Don't forget to check out our new merch drop on www.6.vision
itsjusta6 and ready to beat a cocky Blue camaro am I right @itsjusta6? 😁😁✌🏼
Good im only here for the mustang
No more banging gears pls
Dude need to meet up over here at Tech! I found you on youtube and then found out you go here
I might have an extra rear sproket. How many teeth is that one
“Look how cute it’s so little”
“I’ve heard that a lot”
I died 😂😂😂😂
Mitchel Mulkey only Daniel 😂😂
i swear thought i was the only one who got it😂😂😂😂
Kobra Ronk holy crap 100 likes on a comment lol I feel famous jk lol
Mitchel Mulkey lmao I got 4 I’m famous
Kobra Ronk I got 185 wtf😂
Twin turbo, nitrous, 300cc Honda grom (and go have the motor bored and stroked out, with custom cams and allthat)
Zac don’t give it away yet....
@@itsjusta6official gg
The turbos are not gonna work
Most anticipated video since I started watching CZcams. Definitely can't wait for you to finish Dom da Grom! See U in the next video.
I’m really surprised how easy that swap is going
Finishes the bike, two weeks later
"I sold the bike"
All these Gavin CZcams jokes got me dying assf cause he would
@@lesbiangirlscout I think he found some characteristics of handling that he did not forsee. Hense, he sold the bike to some Grommie bear. Just buy a CB300R. ..them all of the instability of that oversized engine will be solved.
@@chuckbowen4334 Probably figured the free publicity from gromie bear would make him more money/subsribers long term on top of the profit from his project.
Also, some people just like project cars/bikes/trucks and might have needed the cash for something else.
idknuttin that’s usually how most builds go lol build it play on it for a little while and sell it and start a new one
@@lesbiangirlscout not is a challenge when you buy the install kits and over dramatise the install.
PROCHARGE IT!!!! Lol
ohhhh just wait......
Doubt they make them I’m sure you can figure out a way lol
SOUTHERN PRIDE I’m curious to see what’s in store for it
SOUTHERN PRIDE pulling the motor today!! All the cam install stuff showed up!!! Super pumped to get white lightning back on the road. Still got work to do though. I’ve been racing my daily to kill time lol
Sixgun Sled you going to the callout right?
"I'm sorry if this is gay for a second"
What an awesome video. No bs talking to the camera the whole time, just straight up wrenching on the bike. Keep up the great work
The Grominator
BrianGT was a great uu
Hello, I know you sell the grom but I using the same motor and Wiring Harness for my 300 swap. Can you provide any link or pics on what cable or how to connect the Deode bypass on the grom ignition. Thanks!
"Merry Chrysler" love it
2:20
When I think i have my shit together and then life comes out of nowhere and fucks me over
Now if you could fit a Hayabusa engine to it......
Nah bro... the hayabusa engine on a ruccus! Thats the bike I want :p
saweeeet can’t wait to see it wrapped in that flashy wrap!
4:32 Daniel in the background 😂😂
Put the grom motor on the 300 cc
Why would he do that ?
Stratos Stratos cuz he can sell it and buy the 240
@@greentrdmatters3285 he could sell the motor and the bike separately Wich would make more sense , having a really undepowered bike with wrong gearing isn't something anyone would want to buy
Stratos Stratos but if u buy a bike at least its running
That would be anticlimactic
Now your talking sweet..little monster!!!! Now little welder for the garage 👌all set. Went together pretty slick
bro this is gonna be BADASS!!!
Do u torque things ( like sprocket nuts) off screen??
Bikes vibrate a lot( obvious comment of the year)
Can you do some kind of link to where you got the adapters? And any extra parts?
You should put a steering dampiner to remove vibration on the handle bars
Tr00
Look how cute it’s so little
“I’ve heard that a lot” lmfao 🤣
One of the few car channels that doesn’t get boring, always got something different or some crazy build, I can contribute some of that to your bad luck with them but hey just makes for more content
Love your channel bro!
Awesome swap... can’t wait to see more. Keep up the good work...
If you look around thrift/materials sources you can find used spongy square office carpet squares, they are a yard by a yard or so, the higher they stack the squishier they get. They're awfully good for dropping things on and you can stack them to certain heights.
Lol at 4:29 Gavin said "Look how cute, it's so little" and in the back you hear someone say "I've heard that a lot"
Can't wait till it's fully done
4:33 "I've heard that alot." LMAO 😂😂😂
Maybe I’m high, but this made me realize how much motor vehicles are like people. ECU=Brain. Engine=Heart. Wiring harness=spinal chord.
“It’s so little! ‘i’ve heard that a lot”🤣🤣🤣🤣
Smoothest engine swap ever no frame mods amazing
I can feel a grom video edit coming soon!!🤣
4:30 look how cute its so little! (I've heard that a lot) 🤣🤣🤣
It's a Honda Grom with a Spoon engine, with T66 turbo, with NOS, and a MoTeC system exhaust.
Milwaukee cordless tools are the best tools. Good call on that m18
That motor gave Daniel a lap dance.what a savage
Love the new beast!! It riiiiipppssss!!!
Motonosity is currently going to swap a 300cc motor on his grom too. Maybe you guys should race once both builds are finished
DAMN that first ride was WILDDDD!!!~!~!~!~!~!
but for real this is pretty cool lol nice job
I wont lie, im loving this build series
Nice job! Where did you get the engine support adaptor from?
AWWW THE LITTLE INTAKE
Last time I was this early he was saving some people from a exploding truck
lmaoooo I remember that im starting to think he stages his vidZ #trololol
One hint for dealing with so many small screws and bolts .
Use egg cartons and egg trays .
You can mark the carton with a sharpie to note where each bolt or screw goes.
The other trick is where possible put them back if you take a side cover off once the cover is off put the bolts back in their holes.
You won't have so many mystery bolts .
You'll save a lot of time .
you end up with a tray with 12 and 24 spots to hold the little buggers.
Also should your project be apart for a long time you can put some paper towel in the 12 egg carton so nothing moves then tape the carton closed.
With the 24 tray you can stack another tray on top and tape securely keeping things in place till your ready to start working again.
That's so awesome man, also its a good thing ur take ur mind off the truck for a lil
Was at school when the vid came out and then went to my girls house. Best part of the day was this video.
Awesome. You should build a set of drag bars for it before you head to the track?
I always click so fast on your videos I am in school right now and I don’t care I love all your videos and I have to say you are the best automotive CZcamsr on you tube
Bad ass put a turbo on it cant wait to get a grom
Badass man. Can't wait to see the complete finished from.
Dom the grom is looking mighty clean its gonna be super fast can't wait to see the bike when it's finished & the truck & mustang big bad racing
Love the head cam. Nice to have it back
Grom looking is turning into a beast!
Good build so far 👍 good choice on brand for the cordless impact will last a long time and tell em tools at ain't cheap lol good video can't wait for more
4:30"Look how cute, it's so little." 😂💀
Did you say Merry Chrysler. When you handed him the motor. 😂😂
Now this is epic😎
Sooo start to finish how many hours do you have in this swap?
Great video man, where did you get that mount adapter from please?
So just was curious what was the diode for and where did you get the info for that from .. I'm asking cause I looking to do the same swap on my 17 grom ?? ... Good video
This looks like it’s going to be a boss!!
If possible can you talk in your next video about how you got started with your CZcams channel and what you started out with? Wanting to start a channel similar to yours but wanting advice for success.
Just don't kill you're self. 👍👍😁😁that has to be most insane thing I have ever saw crazy fast .
Where did you get the bracket etc from?
The Grom Reaper ☠️
The grominator 300 🤙🏼
Buying a quality impact was the best thing I've ever done working on cars. Also this swap is fucking awesome.
Dankweelie’s friend, is going too make a groom with a 1000cbr engine, so you need a bigger engine then that one you have there 😁👍
😳😳😳I’m so jealous!!! Sweet build dude!!!
Is any Frame Strengthenings needed on the Grom frame for 300 swap?
Is the Grom motorcycle dirt and Street mostly Street? What makes the Honda Grom better or different than the other bikes? I thought someone said the Grom was a Honda.
in Brazil it has been a long time since we transformed 125cc into 300cc, or even into 400cc with cylinder, piston, etc. modifications.
You need to turn the Milwaukee to a 1 on the switch above the battery because it can break a screw thing
What is the bracket you used to mount the 300cc engine? Thank you
William Miller I would like to know as well
Definitely me too....
Yeah where can we get the motor bracket to put 300 motor on grom
You just need to reinforce the hanging frame.
I know this is a late comment but, can you tell what additional parts did you bought and where? Thanks its gonna help me a lot
so little *i heard that a lot* lol died there
If you want to have the fastest Grom put a 450 motor in it or a 1000 motor in it. There is a 450 Grom somewhere on CZcams and it is absolutely insane
This the nicest grom on CZcams 😍
Nice bro. my wife is currently on life support but I will eventually catch up with your videos if you can send some prayers our way they will gladly be appreciated
David Build Vlogzz what’s your Instagram?
ChrisShea1988 mmagnetic2016
God bless you and your family david
ChrisShea1988 @mmagnetic2016
Jesse Hernandez Thank you I appreciate it
Use the grinder and grind the break lever!
That pipe makes that thing so loud but loud is good
Where did you get the 90 degree hose and filter for the throttle body?
The grom,looks nice as is
“4:34” I was rollin 😂
I have a grom fram and really want to put a new motor on it. How do I get a motor mount, so I can install a different motor?
Take the GROM motor and make it into a go kart!
day just got so much better!
What kit did u buy for the swap?
Get exhaust tube expended to match the muffler pipe. Rear break longer bolts and small spacer
Wouldnt be easier to swap some 250 two strokes from CRF or so ? More power less weight
You put your master link clip on in the wrong direction. The opening in the clip should always face to the rear, or it will pop off under torque.
It's so cute and little, "I've heard that a lot" 😂😂😂😂😂😂
Noticed you skipped the master link clip. Those are always fun without the right tool! :)
That subtle “ive heard that a lot”
I promise to like this comment
Well you promised 😂😂😂
Lol
Btw I liked :)
You got me
Nice job copying other people for attention.
Promises are meant to be broken 😘
@@jordanlazarus7345 whoever made it first didn't say it's only for him to use
" I'm sorry if this is gay for a second " LMAO quote of the video
I’m in class rn but fuck learning ur vids are more important 😂
Where did you get that mounting bracket and exhaust pipe from?
Great build