Video není dostupné.
Omlouváme se.
Janome Domestic Overlocking Machine Tutorial
Vložit
- čas přidán 14. 08. 2024
- An insight to the basic functions available on most Janome Overlocking Machines. Please be aware some features may not be available on all machines. Please visit www.tysew.co.uk for our full range.
This is the most useful video on CZcams on how to thread the overlocker. I got a new machine and got horrified to see that the right lower looper thread came out and this is the one which is harder to thread any others.... I had to learn!! It took me over an hour but I now think I can overcome absolutely anything in my life! Bring it on!!! THANK YOU TYSEW!!
This video is possibly the cheesiest and BEST thing I have ever seen. I want this guy to narrate my life/career.
Are you the beehive-type? :)
Same!!
Complete with the dramatic music between sections
hahah
I just watched this for the flatlock instructions, but perusing the comments reminds me of the days before I could consistently thread the machine. I'd spend a hour, and when it finally worked I wouldn't be able to remember what I had done differently that time. Now, threading is a breeze, and I love the Janome serger.
thanks for a clear, understandable PRACTICAL working vid. Janome manual forgot to mention clearing the knife to reset rolling hem chain finger. glad I found you before I took a hammer to it! Once you clear the obstacles, this machine is great. I went from zero to making a sectional slipcover for my sofa. Whole thing comes apart for washing, making it much more dog friendly. Also love the narrator, clear and not cutesy or condescending. will look for more.
I have had my Janome overlocker for many years and never knew how much more I could do with it rather than just overlocking. Thank you for a great video. 22/04/20
I've just bought a 2nd hand overlocker and was looking for the manual online when I came across this video. Absolutely brilliant, clear and easily understood instructions. Thanks so much.
Great help
This is the cd that came with the instructions manual. I lost both not shortly after I purchased my JANOME 7933 serger in 2010…
I just found this video and I am so grateful! I wanted to sew a flatlock seam but my Janome manual doesn't mention it. Your explanation of how to do this on my machine saved the day!
Once you get the hang of threading it, the overlocker makes everything look so professional. Admit to having watched the video lots of times whilst shouting at my machine at the beginning.
I just bought this machine for 50 dollars in pretty much new condition. Fortunately it had a VHS instruction tape with it! The biggest problem was trying to find a VHS tape player😂😂😂. So happy I found this video👍
Thank you. I learnt more from this video than I have learnt from the manual that came with the machine.
Terrific video! I watched a number before I stumbled across this one - definitely the clearest and most straightforward I have seen - answers all the main questions I had
Love the video. I found it very understandable and practical. I just bought a Janome 8002DX today and after watching this video I can't wait for the things I plan to make with my new Janome. I have bookmarked this video so that I can come back to it and watch it again. Thank you
This is an absolute gem of a video. I just got a second hand machine and thought it was defective. Turns out my interpretation of the manual was the problem
We pay lots of money for our sergers and we don't get instructions on how to sew on knits! This helped me so much.
Just bought my very first overlocker, (serger) and this video has been brilliant in helping me understand it!
Yes I agree with Paula Fox. He really speaks so clear n slow that very comfortable to listen too. Thank you so much for this tutorial which I would say the best.
This was an excellent tutorial. I was getting frustrated vut now its threaded and I'm seeing. Thanks
So happy to have found your Janome Serger video. They are hard to find but, I kept looking and am very pleased. Thanks linda nelson
THANK YOU! Narration is to the point and images are clear.
This is a splendid tutorial. I have to laugh at the final bit, 'cleaning and oiling the machine'. My serger never looks like that on the inside!
Please dont ever delete this video
Thank you so much for sharing. You have no idea how I appreciate this. I need all the help I can get. I have Janome Four DLG bought it about 7 years ago and never used it cause I didn’t know how to use it ❤
Saving this video to refer back to when I'm stuck. Clear and easy to follow. Music between sections made me laugh.
Very informative!
Even if I don't get a Janome branded machine this video will still come in useful.
I have been using my Janome overlocker for some time. I used a thickish fleece and was doing well, making a dog bed cover, then it jammed. The wheel will go backwards taking the needles right up, but not entirely up to the top in the normal sewing direction of the wheel. I believe that it jams where the two looper needles meet and won't pass each other as normal. I have regularly oiled the machine, and cleaned it out but hit a seam which caused the partial jamming.I found this exceptionally useful video giving such help on the varieties of stitches! Threading the front overlocker (green) needle through the underneath is always difficult for me. Wish that I had found this right at the beginning, but coped as it was my second serger. I did look at the manual! Never too late if I get it going again. But, it would have been great if this video included just a little on mechanical problems, the solvable ones for someone who is prepared to undo a screw or two. I cannot get to a repairer! Any tips please? Otherwise excellent!
THANKS FOR POSTING THIS VIDEO!
This video has saved the use of my serger because I lost the cd manual probably not even a month after I bought the serger…
Thank you so much for this video, I've always avoided the overlocker because I could never thread it right. This video has taught me how to and so much more! forever grateful!! :)
Very helpful and well made - have had this serger for years and am just beginning to tap it's many features. Thank you!
Im so happy this video exists
I am watching this whilst in LockDown #TeamCovid-19
Thank you, I have a 'Brother' but couldn't find any helpful video's but yours was perfect!!
Very helpful video! Beginner, did not know how to sew. This video helped to insert threads properly and get it work 🎉 Whoa ❤
Excellent video. Much better than trying to read the manual. Thank you.
O melhor vídeo com instruções de como usar as máquinas overlock da Janome!!! Profissional! 👏🏻👏🏻👏🏻 Mostra como passar os fios corretamente e como regular os pontos e tensões dos fios! Agora espero conseguir usar melhor a minha máquina Janome 8002D. Muito obrigada!!! 🙇🏻♀️
Best instruction I have seen
Excellent intro... I’ll be sure to keep coming back for reminders.
I appreciate this simple concise video. Thank you!
This instructional video is amazing! It’s the best I’ve ever seen- well done!
The best ever from what i have seen
I've had my Janome serger for 4 yrs. and until finding this video, had not been able to find decent instructions on the "stitch" settings! The manual is a total waste when it comes to helping one know correct setting for the type of stitch one wants. Most books and videos are not for Janome, which leaves one hoping they can adjust from another machine's instructions........NOT GOOD! At least this will help with the basics. I wish Janome would have a reference book that showed the stitches along side the settings! That would make using the machine so much more enjoyable. You could at least make adjustment from there instead of having to make so many changes, wasting fabric and thread.
Sylvia Thomas oh my gosh! Totally agree!!!
Excellent video and easy to follow
great instructions. thanks.
also looking for how to attach new thread to existing and pull it through as an alternate way to thread.
This is a brilliant instruction video - I have been struggling so thank you so much.
Excellent, clear instructions - thank you!
Just found these janome videos hppong will help me. Nearly giving up threading. Lol. An terrified to change the cotton so complex. Hoping after watching vids a few times can get it going.
Wonderful easy quick and understanding
Thanks a lot for this video
Thank you for this great video! 🥰
This video is brilliant and should be available in hard copy, since my Janome 6234XL comes with a blurred DVD and no manual
Thank you for sharing. Now I can start sewing.
I hope you can help.. I have a New Janome 4 threat the seams seem to be pulling apart a little. It hold together but looks yuck. all settings on 3. Re threaded it as per the manual It is also skipping stitches
Great video
Thank you soo much , USEFUL / HELPFUL VIDEO
Perfect! Very professional and easy to understand. Thank you.
Hi, This video was just wonderful. Thanks. My hubby caught his laptop leads up in my threads, so I had to re-thread the machine. (I've only had it a month). Since then, when I use the machine, it keeps snapping the right hand needle. On checking this video, I am now sure that I am threading correctly. So.........can you please offer any advice as to why the needles keep snapping. Not cheapy needles, but Janome, so that's not the problem. I'm pulling my hair out now, because I've snapped the five that came with the machine. Keeping my fingers crossed in anticipation.
Hi, there. I'm sure you have figured it out by now, but I broke 5 right side needles before deciding to just rethread the whole serger as each time a needle broke I would just replace it and rethread the one needle. It worked! Needles stopped breaking.
What other needles can I use for my finess 234 overlocker as the recommended Janome ball point HA-1SP is very hard to find
Excellent - really clear instructions! 😊
Sou do Brasil ótima explicação ameiiii Parabéns os profissionais vcs são top
Thank you this is just what I needed!
Hi, My overlocker is not giving me perfect finish even after fine tuning on only lycra spandex fabric. Can you plz tell what is the correct tension settings. Plz help
Hi
Thnxs fir the vedeo
Could you please explained rolled hem with changing the plate
I have a Janome 234D overlocker
Thnx
Nis
It is NOT clear with the green thread how to get it to the front after putting it back through the lower looper... it magically appears here for her to thread it through the needle... it's so fiddly.. any suggestions please??
I used long tweezers. However, the easiest way that I have found is to cut the working end piece off a plastic plant or cable tie, leaving a three sided rectangular hook, and then catch the thread in the improvised hook, after putting the thread through the hole at the end of the looper, and then push the whole thing from left to right, picking up the thread to put through the looper hole on the right! As it is flexible and not liable to damage the machine, I find it fairly quick and easy.
Waarbkan ek n Jenome 234 Overlocker se bo lem te koop kry. Bly in Bothaville. Vrystaat. Suid Afrika
I wish there was a video on threading the jaome 744d lower looper as I cant open the side to thread it.
Thank you ! this really helped me!!!
thank you very muchs,
nothing speeking english,
pero todo muy bien,
muy buen vídeo y se entiende perfectamente
This is a first rate video but I am still struggling to thread my Janome 6234XL.
Hello Im from Ecuador .I dont speak perfect english please tell me every stitch must use de cutter
Thank you 💖
Excellent video - thank you.
A great video but I have a problem. I have replaced a broken right needle and have begun to rethread from scratch. However I am unable to move the balance wheel forward to to continue with threading. I have inspected inside the cover and also connected the power but despite all this the wheel will not move. Does anyone have any suggestions?
+Celeste Greeves Just a thought, but did you retrieve all the broken needle? any chance part of it dropped into the machine & is jamming it & preventing movement?
trying to locate a B throat plate for Janomelock JL 603A. Apparently I need this for a rolled hem on fine material .Really need this,or a loan of one, Tessie
My Janome serger isn't a JL 603A, but I shorten lots of prom dresses with the ordinary rolled hem settings and no special attachments.
Very helpful for me. Thank you
I have janome 5002... is there any boday help me to understand it completly
I have different server but still this video is very helpful for me I still can't understand about the blade to disconnect im scared that I might do something wrong and fail in doing my project
Just push against the spring on the left hand side, underneath the cover that you slide to the left, and it will go out far enough to then pull the blade out of the way and tuck it down.
can someone PLEASE help me!! I have rethreaded my machine OVER AND OVER and the lower looper keeps breaking. I have tried better thread, different needles, threading in order...threading out of order. everything I do seams to fail. sometimes it will work for maybe 5 minutes and then snag and break again. I have no idea what I am doing wrong.
***** I think what is happening is that the lower looper thread is not going over the upper looper (the looper that does not need to be pushed out so that it can be threaded more easily). If the upper looper thread is not in the right place, your thread will break and you won't be able to serge. Look carefully how the person in the video sets up the two loopers. I find that putting the upper looper thread in first works better for me.
I am Harriet Allen, not my husband's name. I have to figure out how to get my name and google address up.
David M. Allen M.D. Hi David. Thank u for ur comment. I actually FINALLY figured out that I wasn't using the correct needle size. It was a real duh moment for me. Needles are an important part of a machine operating correctly. I NOW know this. Lol. I appreciate your time in your comment.
David M. Allen M.D. Thank you Harriet!
"Safety first! Do not switch on your machine!! Do everything manually and when you think you've most of the threading basics when you finally do switch it on, make sure your feet are well away from any operates!!!
I have looked everywhere on line to find where I can get an instruction book for my Janome serger model #888. So far I have had no luck. If you could help I would appreciate it.
Is yours the Compulock 888? If so, Google Janome 888 manual or click here (if this works...): www.janome.com/siteassets/support/manuals/retired/serger/compulock888.pdf
Which tension must be while threading please
you are great! thanks for sharing
upendo zachaia y
This is not clear how to thread the green thread. The thread is now winding round and round.. hope I haven't broken the whole machine. :\
This was so helpful
will only stitch the top of fabric and not the bottom.HELP!!!!!!
Thank you
Thanks, very helpful.
I take it serger is another name for over-locker?
David Marks I have the same question!
Yes UK says overlocker. USA calls it a serger.
Which tension must be the machine while threading please
The presser foot should be in the raised position which will release the tension while you thread it, so it shouldn't matter what your dials are set to.
that was awesome!
thank you
5:19 beehive type
I was thinking of buying this type of machine but after watching how you had to thread it, it is so not happening.
It's not as bad as it seems. And once you have done it once there is a trick you can use to "cheat" doing it again. You cut the thread near the spool and tie it to your new spool. then you gently pull it through the machine until the knot ends up at the needle. Then you just need to cut off the knot and thread the needle. No need to remember the thread path!
you made laugh coz I went reverse I bought the Magnolia 213 on a sale n now I'm having sleepless nights threading it no help at all with manual or youtube gosh for the love of serging someone please help
brat46 don’t buy it , it’s a nightmare. You have to be a contortionist to thread the green looper. I’m going to take mine to the thrift shop, so sick of it.
awesome !!!!!!
Muy bueno, pero seria mejor en español
Very helpful🙌🏽
Prix de la machine
Syper 👍🤗
i just thred my mums over-locker & found the prob useng this vid & all it was. was a damm needle that was not put in properly there bloody fussy things
I mean serger
Suomeksi
Poor camera work No too helpful at all. Please cut to annoying music.
Pat Yake