DIY E53 BMW X5 Door Handle Carrier replacement

Sdílet
Vložit
  • čas přidán 22. 11. 2020
  • Join this channel to get access to perks:
    / @zeiten
    Hey guys, very common issue for some reason exclusively on e53 x5 door handle carrier failure, here is a guide on how to replace it
    Thank you for watching
  • Auta a dopravní prostředky

Komentáře • 47

  • @cyclonus01
    @cyclonus01 Před 3 lety +8

    Your x5 is so clean especially for 235k miles. Amazing.

    • @Zeiten
      @Zeiten  Před 3 lety +4

      Aged pretty well, mileage still counting with no end in sight😁

  • @stevenwreyford4570
    @stevenwreyford4570 Před 3 lety +4

    Great content again Tim. I’ve got a E70. I love the car, but it disappoints me that they are so badly engineered that you need a rocket scientist to fix the door, and that the plastic disintegrates when you work on almost any part of the car. You are very good at what you do because that wasn’t an easy job.

    • @Zeiten
      @Zeiten  Před 3 lety +1

      Thank you, well e70 has its issue but i would say built pretty good

    • @stevenwreyford4570
      @stevenwreyford4570 Před 3 lety +1

      @@Zeiten That makes me feel better!!!

    • @jonc2914
      @jonc2914 Před 2 lety

      Welcome to BMW ownership, I have 3 and I never learn my lesson, they all have very cheap quality plastic everything that breaks

  • @martinamadsen812
    @martinamadsen812 Před 4 měsíci

    Excellent how-to video, thank you for sharing your skill and knowledge.
    Stay safe, regards Niels 🙄💕

  • @marcocorreia1984
    @marcocorreia1984 Před 5 měsíci

    Very clean E53, support for your work and video but unfortunately destroying door vapor barrier acoustical membrane was unnecessary with some care and planning. BTW, new replacement vapor barrier is available if needed. As far as the doors panel, a two part epoxy can restore to like new condition, broken clip holders can be recreated but need a bit of creativity

  • @seanboyle885
    @seanboyle885 Před 2 měsíci

    Thanks for the help. Great guidance

  • @alanm5697
    @alanm5697 Před 2 lety +3

    Thanks for the video, mission accomplished. But, I have to disagree with your assertion that the failure is caused by people incorrectly opening the door. It is a design flaw, pure and simple. And yes, opening and closing a door SHOULD be tested 100,000 (or more) times and should not fail. BMW makes cars that look great on the showroom floor and drive great, for a while. Then the oil leaks, electronics issues, and sub-par engineering start showing themselves. BM(trouble you).

    • @Zeiten
      @Zeiten  Před 2 lety +3

      Oh absolutely a design flaw but since we can’t change the design we better change the way we use those handles so they can last longer that’s all i wanted to point out😉

  • @ImStep-by-Step
    @ImStep-by-Step Před 2 lety +1

    How did you get that much leverage to push the wire in place? OMG I’m struggling with that step 😖

  • @petercantremember253
    @petercantremember253 Před 3 lety

    @Zeiten LLC hi Tim,just an FYI for you , l had to purchase the door handle carrier from FCP euro $50 AUD for the part and $40 AUD for shipping..so $90 but still cheaper than buying anywhere in Australia, here they're asking between $150 - $200 and thats if they have it in stock..all of them had no stock due to covid is the blame..so there ya go..thanks again Tim and open your ebay store fast..Australia needs a good supplier :)

  • @simplelangperorock
    @simplelangperorock Před 3 lety

    hi
    can you do DIY how to access/properly clean the throttle body of 2007 X5 il6 3.0si?
    thx

  • @sparkden
    @sparkden Před rokem

    Great video can you please list the hexagonal sizes

  • @Frencheee76
    @Frencheee76 Před 6 měsíci

    Thanks for this. Very helpful you spent some time showing how to align the back alan key fixing and how tricky this is. I spent hours and then found removing all of the lock cable rod connectors, it went it first time. Just fiddly to reconnect the cable back on to the lock but not as annoying as trying to allign that bolt. It was about 1mm out before I removed the cable. Thanks so much. Random unrelated question. Do you have the problem of the fuel tank sender reporting half a tank when its empty. I changed the sender a year or 2 ago and its been fine. Then its stopped again. Do you think its stuck on cables or failed again?

  • @petercantremember253
    @petercantremember253 Před 3 lety

    Watched again Tim , carrier arrived from FNC and it actually cost $122 aud l forgot about exchange rate..so here goes lol

  • @steveochry4047
    @steveochry4047 Před 3 měsíci

    Could you please tell me the name of the auto parts you're referring to for that carrier unit I cannot understand what the name is that you are saying please thank you

    • @Zeiten
      @Zeiten  Před 3 měsíci

      Febi bilstein

  • @petercantremember253
    @petercantremember253 Před 3 lety +1

    Good video Tim..l watched it all and mine is still broken..so that didn't work..l couldn't understand the brand name you said to buy..could you type it here please or post the link..Cheers on another good and very instructional video

    • @Zeiten
      @Zeiten  Před 3 lety +2

      Febi bilstein is the brand, we will have our ebay store set up soon and all the links will be in the description

    • @petercantremember253
      @petercantremember253 Před 3 lety +2

      @@Zeiten Nice one , hope it goes well for you Tim and thank you for brand name

  • @stanisawr.454
    @stanisawr.454 Před měsícem

    Za długa linka zamka...przerobić na 2 uch2yt i skrócić zatrzask..

  • @JUANTorres-cs9oj
    @JUANTorres-cs9oj Před 3 lety

    hey a go 2008 bmw 750 li 4.8 engine crank no starter please k you can to new orleans

    • @kuli433
      @kuli433 Před rokem

      Brilliant video. Thanks for the step by step guide 🙏

  • @petercantremember253
    @petercantremember253 Před 3 lety +1

    Wow Tim..my rhf (drivers door) went kaaputt 2 days ago..So if l watch all this video , will mine be fixed?

    • @Zeiten
      @Zeiten  Před 3 lety +2

      There is a rumor if you watch this video 5 times that your issue will magically resolve😂😂

    • @petercantremember253
      @petercantremember253 Před 3 lety

      @@Zeiten yeah sure...and Santa is bringing me a 2020 X5M for xmas 👍✌

  • @MrJuan67
    @MrJuan67 Před 2 lety

    My 03 X5 front drivers side door won't open from the inside. Will this fix the problem? It opens from the outside.

    • @Zeiten
      @Zeiten  Před 2 lety +1

      No, check wire from inside door handle to actuator

    • @MrJuan67
      @MrJuan67 Před 2 lety

      @@Zeiten Thank you so much for a quick response.

  • @harvrindrsingh
    @harvrindrsingh Před 3 lety +1

    Hi from dubai. Thanks like always best information videos. Like to know are you having fb and instragram

    • @Zeiten
      @Zeiten  Před 3 lety +2

      Thank you, have other social media with the same name but haven’t been posting anything there for a long time, only youtube is relevant

  • @moonraccoon1388
    @moonraccoon1388 Před 3 měsíci +1

    After doing this job my window and mirror control no longer works from the driver side switches. Still works from the door itself. no way to control the mirror though. Also the lock actuator does not work from the center button nor the driver side. any suggestions?

    • @Zeiten
      @Zeiten  Před 3 měsíci

      Check wiring to door lock actuator

    • @moonraccoon1388
      @moonraccoon1388 Před 3 měsíci

      @@Zeiten Would that affect the windows and mirror control from the driver side as well though?

    • @Zeiten
      @Zeiten  Před 3 měsíci

      @moonraccoon1388 yes

    • @moonraccoon1388
      @moonraccoon1388 Před 3 měsíci

      @@Zeiten I did check it so far as looking for wiring that was not connected.. It all seemed pretty snug and seated. You think maybe unplug it and check the terminal closer in that case? Perhaps a bent pin on the actuator? Can you explain how the connection to the actuator can affect the passenger side mirror and window from driver side switches?

    • @moonraccoon1388
      @moonraccoon1388 Před 3 měsíci

      @@Zeiten Do you know where I can find a wiring diagram of the door?

  • @ronaldslager1714
    @ronaldslager1714 Před 3 lety

    What brand did u say u recommend???

  • @ronaldslager1714
    @ronaldslager1714 Před 3 lety

    Where are u located?? My car needs fixing!! Maybe u can help!???

    • @Zeiten
      @Zeiten  Před 3 lety +1

      We service Los Angeles area

    • @ronaldslager1714
      @ronaldslager1714 Před 3 lety

      @@Zeiten ohhhhhh Im in NYC... My car has a fuel pressure issue and also the DSC inactive/4x4 light came on... NO mechanic knows whats wrong.. 2 weeks of this:(

  • @kawarthakenny1077
    @kawarthakenny1077 Před 8 měsíci

    Hey, what’s the carrier company name please?

    • @Zeiten
      @Zeiten  Před 8 měsíci

      Febi bilstein