Found a free Toro mower on the side of the road! Patreon: / ils360 facebook: / ils360 instagram: / ils.360 #Toro #toromower #lawnmower #mower #giveaway
I learned a lot from your video. Perfect pace and explanations. Sure wanted to clean off that grime. Really good tips on revitalizing the start pull cord. Thanks!
Excellent information Sir! Bravo! Only rubber I had swell up is the Nikki 6 carburetor gasket 😂 I like the method of removing it and then blow dry with air!
Do you have the same model? The only artichoke system I don't expectually care for is the one on the Honda's I've had a lot of issues with those or at least seen a lot of issues.
Are you trying to clean an engine to reassemble or cleaning engine that is being used? It can be used on the outside of an engine If you're just trying to clean the engine up I would get some engine degreaser gel comes in a spray can just be careful with it getting on to paint.
I bought one of those non running. Coil rubbing flywheel. The bolt with stud not tight enough from factory. Coil rubbing. Came with 2 extra coils. No spark WHY? Watch a video Coil on up side down. Who would have known. Turn over Spark clean carburetor, sharpened blade, change oil sell.
I buy carb cleaner at menards. Go to check out with a case. Scans for 1 can. So I go to service desk the total is wrong. It becomes educational for check out personal
It's pretty easy have to be a subscriber turn the Bell icon on and leave comments on the videos from here onward and you'll be entered to win one of the prizes chosen by you guys there is a survey going on in the community tab on my channel for what prizes people would like to see
I am so sorry sometimes I don't realize I'm blocking stuff.. next time I have a similar mower go through I'll make a video specifically on turning up the idle and showing in-depth how to if you would like
Our skin absorbs water and chemicals. Should be wearing gloves while using carb cleaner or any chemicals for thar matter. Good indepth video. Not hating but saftey should be a priority. I havr a friend who got cancer from years of using brake cleaner when he used it cleaning transmissions as he was a teansmission rebuilder. Great video and lots of great info. Thanks for sharing.
Well it's definitely not 10 horsepower. The engine isn't physically big enough and does not have the horsepower when mowing the lawn I would guess it's closer to a four or five horse
I learned a lot from your video. Perfect pace and explanations. Sure wanted to clean off that grime. Really good tips on revitalizing the start pull cord. Thanks!
Thank you so much for your kind comment I really appreciate it and I'm glad I was here to help!
Excellent information Sir! Bravo!
Only rubber I had swell up is the Nikki 6 carburetor gasket 😂 I like the method of removing it and then blow dry with air!
I'm glad you enjoyed the video :-) I'm hoping it helped you out with yours!
@@ils360 Thank you very much Sir! 😊
I just discovered this channel and am amazed at the amazing content you dish our
Thank you I really appreciate it 😊
I simply love your video style, truly refreshing and creative.
Thank you!
Thank you so much for this educational video, I learned so much.
Love this video, I think I’ve watched it four times.
I love how you repair them.
Thanks ☺️
good mowers , I like the auto choke on ours as well ! Starts up easy every time
Do you have the same model? The only artichoke system I don't expectually care for is the one on the Honda's I've had a lot of issues with those or at least seen a lot of issues.
@@ils360 No I have a different model , But the same engine .. Honda has a bad system and many have had trouble with the choke
Just shared this video with my friends and family
Great finds!
Thanks!!
Great finds
Definitely! They where fun to get going again!
Can that carburetor parts cleaner be used on the outside of the engine? Just wondering. I appreciate your video! Thanks!
Are you trying to clean an engine to reassemble or cleaning engine that is being used? It can be used on the outside of an engine If you're just trying to clean the engine up I would get some engine degreaser gel comes in a spray can just be careful with it getting on to paint.
Your works seems easy till I started trying to practice some at home 🤣 seems you are a real expert.
Hey all it takes is practice with some trial and error you will get there! What are you working on?
Am trying to work on my carburettor
It’s hard to believe they just throw them away 😢😢 must be wealthy people up there because it never happened in Texas
Definitely not wealthy It happens everywhere.. 🤷🏼♂️ It was actually in a mid class neighborhood there where 4 or 5 of them
I ground the screwdriver to fit all the full width. If it dosent loosen tap screwdriver with hammer to jar the jet helps
That's a good idea 👍 and shocking it with a hammer is it great tip!
Nice mowers
I would take the all wheel drive
I definitely did I took both of them that all-wheel drive one I'll be working on here in a week or so
good job!
Thanks!
Following your channel, interesting content!
I bought one of those non running. Coil rubbing flywheel. The bolt with stud not tight enough from factory. Coil rubbing. Came with 2 extra coils. No spark WHY? Watch a video Coil on up side down. Who would have known. Turn over Spark clean carburetor, sharpened blade, change oil sell.
My Briggs and Stratton 7.25 OVC Blows a puff of blue smoke from the carb. But won’t start. New gas new plug and I cleaned the carb.
Sounds like the intake and exhaust valves need to be adjusted.
Nice mower
Thanks!
I buy carb cleaner at menards. Go to check out with a case. Scans for 1 can. So I go to service desk the total is wrong. It becomes educational for check out personal
Off topic I saw a channel give away on ur videos how would I join ?!?!
It's pretty easy have to be a subscriber turn the Bell icon on and leave comments on the videos from here onward and you'll be entered to win one of the prizes chosen by you guys there is a survey going on in the community tab on my channel for what prizes people would like to see
@@ils360 tysm
I would have loved to see you bending the tab to raise the idle, but your hand was blocking the view 100% !!!!
I am so sorry sometimes I don't realize I'm blocking stuff.. next time I have a similar mower go through I'll make a video specifically on turning up the idle and showing in-depth how to if you would like
Our skin absorbs water and chemicals. Should be wearing gloves while using carb cleaner or any chemicals for thar matter. Good indepth video. Not hating but saftey should be a priority. I havr a friend who got cancer from years of using brake cleaner when he used it cleaning transmissions as he was a teansmission rebuilder. Great video and lots of great info. Thanks for sharing.
Definitely something I need to take into consideration and will do better in the future thank you for the warning
I've done the same thing for 52 yrs. I'm fine.
@@tonyz6421he was fine until one day he wasn't. Yolo
I think you should wash it before you touch it so you can see what your doing😮😮😮😮😮😮
I like watching them after so if I make a mess with oil fuel or similar I can just clean it once instead of cleaning it twice 🤷🏼♂️
Quart & a half 3 bucks?
Of oil?
150 cc divide by 15 is the hp = 10 hp
Well it's definitely not 10 horsepower. The engine isn't physically big enough and does not have the horsepower when mowing the lawn I would guess it's closer to a four or five horse
Nope
Honda clone?
Something like that 👍