Any insight picked one of these up and no matter what vehicle I plug into the only feature that shows is auto scan. So far a waste of money, not sure if it’s user error or a broken unit.
Codes do not mean active problems. Most of the "MINOR issues" generate codes when a set of conditions fail or go above/below thresholds and stay on ECU's forever until they are manually cleared. 99% of drivers will never know they about them unless they scan the ECU, this happened to you those codes were probably related with old services you did (like the one on your door), even a simple light bulbs replacement in some vehicles can generate one error code. There are other type of codes like brake system related. For example ABS light will show up and a code will be stored on ECU if something is not within threshold when you switch on the car/ignition, if you scan you will find the code. If you switch off the car and switch on again and the values are now back to normal light will cease, the ECU will clear that code automatically and you will not be able to find those codes again if you scan after that. (in most vehicles) This scanner has a great potential, hopefully more like this low budget will start to appear to take down the big overpriced monopolies that we all know about... :)
I just received this unit. So far I love this little unit. My big concern with it is the only way I could get it working was to give the software complete permissions to my whole phone. Very sketch.
I was going to order one but this is a deal breaker for me. I do have an old phone I don't use that has nothing on that I might think about using just for this. Thanks for the heads up!
Do you have to pay every year in order for this OBD reader to work ? If you dont pay does that still work ? Do you need to have internet to used it ? If you don't updates does that still work without updates ? Out from the box can you used it without wifi or internet ? Can this scan for Fuel Pressure ? And can this scan for compression test ? Is this a Complete diagnostic Scan tools ?does it Scan from 1996 cars going up ? How about Toyota Camry 2001 2.2 Liter 4 Cyl or Buick Park Ave 2003 3.8 Liter does it Scan these cars ? Does this scan for battery ignition parameters ? Does it Scan for a bad head gaskets ? Is this the latest version 2024 ?
Nice video, I have a 2014 jeep gc summit and the driver side mirror is opening passed the original set position, it closes fine but open all the way pass the middle mark or should I say the original position, any advice?
there is a "pro" and "lite" version ,, which is this ? Also have a few more "top end" top-don and they don't do a rest on oil service ,, just manual ,i think its a cop out really
Is there a user manual for this thing? What's the secret to getting it to work? It's not user friendly at all and I can't get it to do anything using Topscan. On my Toyota all it does is go to a blank Diagnostic screen that I can't get out of unless I exit the program then it won't reconnect! Seems very buggy plus you have to create an account and login to use the stupid thing!
I reckon this has something to do with the phones internals that relate to ability to run 64bit only apps i had trouble going the other way and sideloading a 32bit app to pixel 7a it doesn't work as i found out later google no longer support 32bit apps on pixels from 7 on sometime in future all apps on playstore will be 64bit only
Does it need to be plugged into the car to connect to phones Bluetooth? Because I’m under the impression that it has a battery built in? Because I can’t connect it to my phone , like the manual says it can…the video I watched showed nothing about plugging it into the car before connecting to Bluetooth
Hi i brought this model after i confirmed disconnect obd and removed went to start car and it did nothing . Tried again and it struggled to turn over can you tell me why it did this did i remove too quick vehicle is a ford focus 2011 hatch back
So sorry to hear that. It’s possible that the battery drained from using this tool with the car off. Hope you get it figured out. Best of luck to you, Dan
Hey, I have a '17 hybrid Platinum. One thing that bugs me is that the car doesn't have a digital speed display on the little screen between gauges. Anyway, can you customize the gauge cluster with "topscan"?
Ha! I haven't caught one of your videos in awhile Dan baby! Did you get rid of your Cayenne? My Autel I used to use won't connect to my phone for the life of me so here I am. Cheers!
I bought one of those last week. Hooked it up to my Mitsubishi triton with no known faults. I did a scan and it came up with seven faults in my ABS. It then set my check engine light, traction control light and ABS. It would not clear the faults and when I disconnect it the lights stayed on. Top Don tech support have been no help. I would not recommend this tool and will not use mine again.
Any insight picked one of these up and no matter what vehicle I plug into the only feature that shows is auto scan. So far a waste of money, not sure if it’s user error or a broken unit.
Codes do not mean active problems.
Most of the "MINOR issues" generate codes when a set of conditions fail or go above/below thresholds and stay on ECU's forever until they are manually cleared.
99% of drivers will never know they about them unless they scan the ECU, this happened to you those codes were probably related with old services you did (like the one on your door), even a simple light bulbs replacement in some vehicles can generate one error code.
There are other type of codes like brake system related.
For example ABS light will show up and a code will be stored on ECU if something is not within threshold when you switch on the car/ignition, if you scan you will find the code.
If you switch off the car and switch on again and the values are now back to normal light will cease, the ECU will clear that code automatically and you will not be able to find those codes again if you scan after that. (in most vehicles)
This scanner has a great potential, hopefully more like this low budget will start to appear to take down the big overpriced monopolies that we all know about... :)
I just received this unit. So far I love this little unit. My big concern with it is the only way I could get it working was to give the software complete permissions to my whole phone. Very sketch.
I was going to order one but this is a deal breaker for me. I do have an old phone I don't use that has nothing on that I might think about using just for this. Thanks for the heads up!
Do you have to pay every year in order for this OBD reader to work ? If you dont pay does that still work ? Do you need to have internet to used it ? If you don't updates does that still work without updates ? Out from the box can you used it without wifi or internet ? Can this scan for Fuel Pressure ? And can this scan for compression test ? Is this a Complete diagnostic Scan tools ?does it Scan from 1996 cars going up ? How about Toyota Camry 2001 2.2 Liter 4 Cyl or Buick Park Ave 2003 3.8 Liter does it Scan these cars ? Does this scan for battery ignition parameters ? Does it Scan for a bad head gaskets ? Is this the latest version 2024 ?
Nice video, I have a 2014 jeep gc summit and the driver side mirror is opening passed the original set position, it closes fine but open all the way pass the middle mark or should I say the original position, any advice?
The Topdon scanner is much faster than comparable, well-known scanners that use dongles.
there is a "pro" and "lite" version ,, which is this ? Also have a few more "top end" top-don and they don't do a rest on oil service ,, just manual ,i think its a cop out really
I just got the topscan from ebay...but unable to register the device to my vehicle. Says its already registered. Is there a way to reset this tool?
Is there a user manual for this thing? What's the secret to getting it to work? It's not user friendly at all and I can't get it to do anything using Topscan. On my Toyota all it does is go to a blank Diagnostic screen that I can't get out of unless I exit the program then it won't reconnect! Seems very buggy plus you have to create an account and login to use the stupid thing!
Can you change the measurement unit for differential pressure?
Can it reset tpms?
Mine isnt reading the vin 2005 nissan y11 wingroad
Will this let me service my electronics emergency brakes?
Yes
Bought this and the app will not download to my samsung galaxie a13. Sais app will not work on this device. Tried everything. Sending it back.
I reckon this has something to do with the phones internals that relate to ability to run 64bit only apps i had trouble going the other way and sideloading a 32bit app to pixel 7a it doesn't work as i found out later google no longer support 32bit apps on pixels from 7 on sometime in future all apps on playstore will be 64bit only
Does it need to be plugged into the car to connect to phones Bluetooth? Because I’m under the impression that it has a battery built in? Because I can’t connect it to my phone , like the manual says it can…the video I watched showed nothing about plugging it into the car before connecting to Bluetooth
Of course, every obd reader has to be plugged in in your cars obd port.
Hi i brought this model after i confirmed disconnect obd and removed went to start car and it did nothing . Tried again and it struggled to turn over can you tell me why it did this did i remove too quick vehicle is a ford focus 2011 hatch back
So sorry to hear that. It’s possible that the battery drained from using this tool with the car off. Hope you get it figured out.
Best of luck to you,
Dan
Hey, I have a '17 hybrid Platinum. One thing that bugs me is that the car doesn't have a digital speed display on the little screen between gauges.
Anyway, can you customize the gauge cluster with "topscan"?
Definitely not.
Very nice video.
That's what i needed
Love it!
Ha! I haven't caught one of your videos in awhile Dan baby! Did you get rid of your Cayenne? My Autel I used to use won't connect to my phone for the life of me so here I am. Cheers!
Doesn't connect to my samsung tablet either
@@royanderson1429 I got the Topdon TopScan off amazon and it works great, I prefer the software better as well.
I bought one of those last week. Hooked it up to my Mitsubishi triton with no known faults. I did a scan and it came up with seven faults in my ABS. It then set my check engine light, traction control light and ABS. It would not clear the faults and when I disconnect it the lights stayed on. Top Don tech support have been no help. I would not recommend this tool and will not use mine again.
Disconnect the battery
@@anguslean4058 I cleared them with my launch
Lol your car is broken its not the tool.
@@jaydems2k10 not according to my launch scanner, and the light was not on before scanning nor has it come on again since.