Making a Rope Lounger Chair - Bent Lamination
Vložit
- čas přidán 16. 10. 2019
- I started by drawing a chair outline on plywood board and cutting the mould pieces from leftover wood pieces. Pieces are attached to the board with wood screws. I cut 2.4mm thin veneer sheets from 4x12cm spruce boards, 40 layers all together. Sheets are then cut to length and sanded down to 2.2mm. Sheets are bent and glued together using two component melamine glue with open time of 45 minutes. After 24 hours in the mould, laminated pieces are taken out and planed. Main piece is cut lengthwise into two identical pieces. Each one is planed on the cut side. Main pieces and round pieces are conected together with small 12mm thick walnut slats held together with acetate glue. Everything is sanded first with belt sander then with orbital sander and finally by hand. Holes are drilled on the outer edge of the lounger sides with 2.5 cm spacing in between . Beech dowels are then glued into each hole. For seat and back rest I used nylon rope braided between the dowels..
Thank you for watching and don't forget to like and subscribe! :D
webpage: www.lignum-art.com/
instagram: lignum_chan...
facebook: / lignumchannel
Music: anno domini beats- Distance
anno domini beats- Sailing
anno domini beats- Steps
anno domini beats- Awaken - Jak na to + styl
I really liked the chair you did a while back, but this lounger is on a whole other level...just...Wow!
:D And thanks again ;)
This is a valuable addition to my woodwork collection czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
Its a pleasure to see a masterpiece being made with such care and attention to detail. I like how everything is planned and sanded and polished to get that perfect finish. Great work.
I like how he lays the whole thing out with a compass.
Oh God!! You have blown off my mind brother! Can't even make 1% of your skill and architecture .
This is true knowledge, involving everything from calculations to artworks !
Lignum videos are never a disappointment. That's why I try not to miss a single one, sadly I feel very few people are really doing anything 'new' on CZcams. Lignum however never ceases to provoke such deep thought. Love it.
Thank you very much! I Try not to recycle existing projects.. Although getting new ideas is getting harder and harder.. But I don't worry yet ;)
Awesome and inspiring as always lignum! Your shop and projects are second to none on CZcams!
Thank you very much, I appreciate it! :D
I am truly impressed. You are a man at the top of his craft. I hope to someday have your ingenuity and skill. Well done, as always!
Thank you Nate so much! :)
This is phenomenal beautiful work! You've done it again!
Thank you very much Mike! :)
You make it look easy!!! Even with this edit! Nice work!
Very impressive! Thank you for the video.
I love your collection of industrial machines and how you put them to work!
Thank you Justin!
I love that machine that does multiple rips at once.
Must feel like Drilling a Million holes... Very beautiful chair, especially I like the stripe used.
Thank you Sergio! It sure felt like that;)
Beautiful and functional! Simple design yet skilled execution delivers just pure art! Love this, hats off to you!
Thank you Heather! :D
What a great project! Rope idea is genius. You always amaze me lignum!
Thank you Eli! Always really nice to see your comment!
Once again, beautiful work on both the project and the video! I really love the look of the spruce and the lines of this lounger. Unmistakable 'Lignum' style. :)
Thank you Bruxxus! There is something about this curve..
I watched this and thougt "I wish I had the shop and skill to make that." Then you marked for all those dowels and I thought "I wish I had someone to do that." :D
Very nice work.
:D especially if you mark it all wrong and have to repeat it like I did.. Thank you! I'm glad you like the project!
@@lignumchannel beautiful workmanship ,very inspiring.
@@bobkelly3944 Thank you:)
ensen89 - Well watch more videos like this, learn all you can about having and maintaining a wood shop, If you learn all you can without hands on experience and you feel like it's something you'd enjoy, look for woodworking classes in your area, or someone who could have you as their apprentice. Woodworking is slowly coming back so I'd say the more the merrier! Personally I don't have a workshop but that's something I'm striving for as I see this as something I'd like to make my living
Remember, experience is invaluable
Mistakes are moments for learning and are precious!
Admire where you're at with you skill but never stop striving to improve!
and last but not least, find a job you love and you'll never have to work a day in your life
@@lignumchannel I'm glad you got the courage to say it ;)
I learn so much from watching your videos. Thank you!
Thank you for watching! :)
Always a pleasure watching your videos!
Thank you Tom! :D
absolutely amazing.really nice!
Amazing work. looks super comfy.
You do amazing work !! Thank you again for this video
Your chair looks like something out of the future. It has transversed the time barrier. This chair should be the model for chairs in the Mars rocket. UNBELIEVABLE !!!
:D I'm glad you like the design!
Inspiring, beautiful work.
Love that you changed planes/dimensions curving one way and then in a different direction for the top and bottom loop. 👍🏻 beautiful work as always.
Thank you, I'm glad you like it!
Man, your work is so impressive. I wish I had more time to do these type of things.
Thank you, I appreciate it.
Very slick build. Nicely done.
Thanks for sharing!
Thank you for watching!:D
Beautiful work my man!
Definition of hard work mate❤️❤️❤️
Again a fantastic job. Thank you.
Hvala Simon! :D
I can't repeat that. It's realy amazing chair.
As always, beautiful conception and clever build. Result is so elegant.
I'm glad you think so Bernard! Thank you!
Ova stolica ti je fenomenalna 👍🏼 ... pozdrav iz Frankfurta
Крутое кресло! Cool chair!
Just incredible, well done.
Ты крутой перец 👍👍. Классные и неординарные у тебя изделия, молодец. Продолжай и дальше творить и радовать нас. Спасибо
I'm glad I'm not the only one who likes to upturn the hand belt sander like a goof!
XD best hidden feature..
BEAUTIFUL!!!!
Incredible... Nice video, i really liked the music, very relaxing
Thank you Farenheit! I'm glad you like the soundtrack!
That's another beautiful piece of art. Excellent work.
Thank you!
Caramba! Que perfeição essa cadeira 👏👏👏👏
Great intricate work like always. Beautiful piece.
Thank you Asif!
Que perfeição, parabéns. Fortaleza, Brasil.
Another beautiful chair!
Thank you Ellie!
Simplemente genial,una pieza divina de la muerte, un saludo y por supuesto un like desde Naron(Galicia)
Make a chair!..Make make a chair....
Hear it. Love it!
I'm glad you do! :D
Damn that freaking cool, good job dude!
Hello ! I live in the DRC 🇨🇩, I am still preparing my workshop and I admit that you inspire me a lot and I do not fail to view your works.
Good job and go ahead 👍
Wow Antoine, I honestly appreciate it! I wish you all the luck in the world with your workshop, I know you will be successful! I hope I'll see your work when you start working in it!
@@lignumchannel Thanks so much
Awesome!!!!! Super neat and inspirational creation!!!!
Thank you Jose!
😍 i think this is the bestest of bent wood design so far 👌👏👏👏 like it I'm not expecting that 👍👍
Ahahaha, thank you very much! :D
great result - me and my cat would love that chair
:D Thank you Peter!
What a masterpiece! You are so clever!
I'm glad you like it Tielo!
Made from leftovers! Brilliant!
Better than turning it into heath energy.. :D
Hands down this is the best maker content on CZcams
Thank you Michael, I really appreciate it!
this is one of the coolest chairs I've ever seen... that laminate saw (if that's what its called) is amazing too
industrial tools for specific uses are awesome
Thank you Nicholas!
Same principal as the old wind powered saw mill in the Netherlands. Really cool
That saw is incredibly cool. For such a labor intensive build a little power tool help is awesome
@@lignumchannel What's the tool actually called, the one you use to cut the wood into laminate panels? Could you link up make/model please?
LOVED the chair. Discovered the channel today, subscribing :)
that is just so deeemmnn sweet!
Brilliant and beautiful
Incredible workmanship!
Thank you Zohmaa!
Man, that’s awesome. Great job
Thank you!
Your are the master!!!! Awesome!!!!
Thank you Hosh!
THAT'S A PIECE OF ART !!!!!!!!!!!!!!!!!!!1
What an amazing design!
Thank you John!
Your designs are always so simple, yet of course are very labour intensive to fabricate. Always worth the effort though. That's more like a stunning piece of art rather than a lounger seat. Thanks for sharing 5⭐'s
Thank you for watching Robert and for your kind comment. :D It always motivates me when I hear people appreciate my work. Thank you again!
Love your work
Unbelievable work. 🙌🙌
Fc from Thailand 🇹🇭
Crazy ! Awesome piece
Thank you!
looks so epic!
Stunning job..... congrat.
Never disappoint. Great project!
Thank you! :D
Love the trick of pencil and tape. I use that method all the time with 1mm spacer stack and until it's still working I won't get a marking gauge :). Also love the way you you put the electric core around your neck LOL. Dad told me off all the time doing it but I can't resist haha. Thank you for sharing another amazing project :)
What can I say, it's the most practical way :D I love your new website man! It really has a refined note to it..
@@lignumchannel thank you man. It's actually my wife credit. I can't be that detail on social media :)
Pretty cool.
Lot's of likes and love from Pakistan. Sooperb
Very cool!
Awesome. Have never fail to impress. 👍👍👍
Thank you!
I'm gonna tell You honestly, I started off watching this video thinking this dude is nuts! Lol. But damn! It turns out you are brilliant! No lie! That chair is freaking amazing! You`'ve got skills my friend! 👍👍👍
Thank you Reuben very much! I appreciate your kind comment! :)
Que buen trabajo, les escribo desde Bogotá, Colombia
Отличная работа!
You should be proud , just beautiful
Thank you! :D
always amazing!!
Thank you Robert!
You are a true craftsman, awesome work
Thank you very much, I appreciate it:)
Как всегда СУПЕР💪💪💪👍
Спасибо!
PREEEDOBRO! Došao do vas preko Dnevnika. :) Ubijate! Svaka čast.
You do great work
Wow!.. Max level... 🤯
Really Amazing and appreciative,,
Love from - Kerala /india
Thank you, greetings from Croatia!😁
Wow, speechless....
Demasiado bueno y estilo único felicitaciones desde venezuela
Beautiful work!! Nice job man :)
Thank you Matt!
so satisfying and great work
Приятно смотреть. Молодцы ребята ! Так держать!
большое Вам спасибо!
Bel designer . Bravissimo .
Beautiful!
Thank you Robin!
its just impossible...amazing work
Awesome job, I don't know what it is about this chair but something reminds me of my childhood. I think maybe the string seating?
Maybe you had a similar child seat :D.. I'm glad you like it!
looks very comfy
amazing!!!!!
Wow those mitre joints look great.
I was thinking about using spruce so they wouldn't be so noticeable but I'm glad I found that walnut lying around..
Apprentice: “Master, how many clamps should I put ?”
Master: “Keep clamping until you can’t clamp”
Something like that in this case :D
All of them. Steal from the neighbour if you have to
When you want to start woodworking and notice you have to buy 60 clamps first.
@@arcadebit1551 to add to the 43 you already own
@@lignumchannel I just want to know the thickness of the strips which you cut or made from that long wooden bar.
And how many strips you made from that bar?
Please let me know.