You guys mean a lot to guys like me especially when I get home from a lousy day at work and I see you two have put a video on . Merry Christmas to you both and a happy New year x
Merry Christmas Mike. Also wanted to say I had a problem with a Mikuni carb sealing to the rubber grommet.Its old and needs replacing, but I wanted to run the fuel out before putting it away for winter. Would not start because of the vacuum leak. Then it hit me, white lithium grease. Mike always talks about its many uses. Smeared a little on the rubber, put everything back together and it started right up. Love your videos, never miss one. The knowledge you share with us is so valuable. Thank you and I can’t wait for the flathead project to get going again. Joe
Merry Christmas, Pacific Mike and Camera man Mike, and thank you for bringing in Camera Man Mike into the picture. Camera man Mike does a great job working in a very spontanious way to find the right angles to show the very essance of your work on these motorcycles, the "subjective camera" style helps us a lot to understand what's going on. You inspire me a lot to take care of my old Shovel. Merry Christmas to you both and a Happy and Great New Year!
Hey Mike great to see you. Mike and Mike. Merry Christmas and a great New Year. I pray for many more years. Peace and Good Will. And to everyone always know your limitations. We have successfully made fall 2023 how time clicks.
Thank you Mike! To you and cameraman Mike! It’s always a real treat watching your videos and learning. Your wealth of knowledge and positivity is why we all tune in. Happy New Year and Merry Christmas 🎄
Happy Hollandaise! As I have not contributed in a while, and you're not talking bikes today, let me relate what happened to me today. I was out collecting obviously unwanted packages from my neighbors porches. When I got home and began unwrapping I was mortified to find one of the boxes full of dog poop! Whats Wrong With People?!!!!!
You have a great team Mike. It’s truly a blessing to be able to enjoy working with the folks who make the dream work. Secondly, the information you’ve documented and continue to document are an invaluable educational resource for techs working to keep these old bikes road worthy. Thank you and have a Happy, healthy and prosperous new year. 🎉
Love this channel and realy like you guys and I don't even have a older bike but if I did I would like the channel even more that you guys and right back at you I hope I get to see you out on the road
MERRY CHRISTMAS & a HAPPY NEW YEAR to Mike & crew from Ohio! ....... Wish we had yer weather as my Shovel sleeps in the bedroom staying warm till spring ( hopefully early march this year) Hope to see that Flathead running in 2024..... :)
Hi Mike and Mike! Thank you very much for the informative videos all through 2023. Your yellow Knuck is a work of art! Good luck on your Flathead project! All the best to you (Mike and Mike) and to your viewers in 2024. I'm hoping for a much better 2024. I miss California and my wife who was from Santa Rosa, CA. We both liked choppers. You guys have so much going on out there in regard to choppers and custom culture in general. There's just not a lot of that here in my part of Ohio. Build right. Ride safe in 2024. -- W
Merry Christmas Mike and Mike. Enjoy your videos, got a 1976 FLH that I’m bringing back! Your videos are inspirational. Wish I was on the west coast coast to meet you. Give Sonya a treat for me!
@@cameramanmike2072 if I am not wrong, You guys never did a start up/sound video of Your bike, Camera Man Mike. If I have missed it apologies and if I haven't; yee might consider makeing a video off same.
Thanks, guys, for the BEST MC Video series on the net! I have 2 Ironheads, a Shovel, a twinkie and 14 other bikes, you help me keep the herd rolling! Merry Christmas Sonya, don't let mike forget to give you that treat!
Merry Christmas to you too, Mike! I just purchased a 99 softail custom and your Evo vids have been a great resource. Thanks for everything you do! You're the best!
Merry Christmas, Mike and camera man Mike. 56F here in Rhode Island today. Took the panhead out for a long ride, enjoying my mousetrap I pieced together after being inspired by your adjustment video. Thanks for all the knowledge and entertainment. Looking forward to seeing your flathead come together this year.
Hi Mike,I would like to wish you a Merry Christmas and a Happy New Year to all your crew as well. I love the videos and the pure honest approach you have.. Just wondering if you have T-shirt and caps and stuff?? Or even a series of dvd’s for each specific bike.That is Pan,shovel,flattie specific. I find it hard to navigate and find what I specifically need for my shovel work.. It is great to see someone who actually knows what they are doing and to confirm wether I have been doing things right or not so right over the years.. Thank you so much.. Kindest regards and the highest respect to you all. David J Western Australia…
Thank You. Go to our website, Pacific Mike .com. in the upper right corner, it says T-Shirt Store. Click on it and you can order t-shirts and baseball caps. As for more videos on what you would like, go to our CZcams Homepage and click on the word "videos." Over three hundred will come up for you to choose from. Happy Holidays!
Merry Christmas Mike & cameraman Mike your videos are a highlight in my life & my wla has never run sweeter as a result of my leaning from you! Can't wait to see the flathead 80 take shape enjoy your festive season cheers tim from downunder!
Grew up in Southern California, Mike. I live in Texas now. But I'm coming out in 2024. And you're on my bucket list to meet you in person sir. Merry Christmas and Happy Near Year!!!
Good morning Mr Pacific, Cameraman Mike, hope all is well and Merry Christmas 🎅🏻. Great news. I pulled the 131” from my ‘93 Fatboy and replaced it with a 1996 80” Evo. What a difference! She rides like a cream puff. Installed an Ultima ignition, Mikuni 42, free flowing AC and Vance and Hines big shots and I gotta say, for an all stock motor she has a little giddy up. Of course my Baker 6 speed helps but what a joy to ride now. Rear base gasket weeps and I hate to pull apart a perfect running engine but at 64k maybe a good time for 9.5:1 pistons, still 3.48” and mild bolt in cam like the EV13. I know the consensus is an EV27 but I really wanna keep that stock low down torque. I have a brand new set of S&S travel limited lifters and S&S quickies, I also grab a Torrington. I thought of buying a used pre ‘92 “L” grind police cam but haven’t the experience with any of these cams. I’d like to keep it 80”, do you have a preference for a mild bump in power or do I set her back up at 8.5:1? Maybe a .030 MLS head gasket?
I do use the MLS head gaskets a lot. You like a peppy, well mannered engine? Keep the stock pistons. They are probably perfect at 64M. Freeshen it up by honing the cylinders, reringing, new hydraulic aftermarket good lifters and a Dave Mackie EV500 cam. I'm not trying to push products but you have told me what you want and how you like it. You will now have a very snappy fun Evo.
Merry Christmas Mike and everyone else… I got out for a ride today up here in Canada and im calling it once in a 100 year chance… normally-20°c here… keep the great videos coming and bless you all in the new year 🤙🤙
Merry Christmas and happy new year to you Mike and camera Mike. This year's videos have been awesome, very helpful, informative, and inspirational to work on my own harley, keep up the good work, and hope to see you both out on the road 😀 ✌️
First of all, thank you so much, I commented on your last video about my front exhaust lifter, bleeding down, this whole time I’ve been fighting the exhaust lifter, but really, the problem was the intake Lifter was in backwards, oil hole facing the wrong way.!! Again thanks so much and I will definitely be buying some merchandise to help support the channel! Merry Christmas and happy new year🎉
I wondered if I gave you the info clearly enough. You got it! Thanks for writing back. Sometimes I never know if the problem got solved. Thanks for all of it. See you out on the road!
Happy holidays to you guys are your families, I really enjoy watching your videos and I always give them a thumbs up. Hey Mike, let's get that beautiful dyna twin cam on the videos this year huh man??!!!...
Merry Christmas Mike, Love your videos and and all your knowledge. Mechanics like you are hard to find these days.
Thank You and Happy Holidays!
You guys mean a lot to guys like me especially when I get home from a lousy day at work and I see you two have put a video on . Merry Christmas to you both and a happy New year x
Thank You and Happy Holidays!
👍😊
Merry Christmas Mike & Mike, and a safe and happy New Year! I really appreciate and enjoy all that you do. All the best from Oz! 👍👍🇦🇺
Thank You and Happy Holidays!
👍😊
Merry Christmas Mike. Also wanted to say I had a problem with a Mikuni carb sealing to the rubber grommet.Its old and needs replacing, but I wanted to run the fuel out before putting it away for winter. Would not start because of the vacuum leak. Then it hit me, white lithium grease. Mike always talks about its many uses. Smeared a little on the rubber, put everything back together and it started right up. Love your videos, never miss one. The knowledge you share with us is so valuable. Thank you and I can’t wait for the flathead project to get going again. Joe
Thank You and Happy Holidays! We'll get there soon.
Merry Christmas Mike and Mike and Sonya and I hope you all have a wonderful and safe new years!
Thank You and Happy Holidays!
Merry Christmas, Pacific Mike and Camera man Mike, and thank you for bringing in Camera Man Mike into the picture. Camera man Mike does a great job working in a very spontanious way to find the right angles to show the very essance of your work on these motorcycles, the "subjective camera" style helps us a lot to understand what's going on. You inspire me a lot to take care of my old Shovel. Merry Christmas to you both and a Happy and Great New Year!
Thank You. Ain't Shovelheads grand?
👍😊
Hello again from Sweden with a white christmas and cold🎅🎄🎁🇸🇪. It have been a interesting year with Mike and Mike. See u next year.
Kjell Blomstrand.
You bet. Thank You and Happy Holidays!
Hey Mike great to see you. Mike and Mike. Merry Christmas and a great New Year. I pray for many more years. Peace and Good Will.
And to everyone always know your limitations. We have successfully made fall
2023 how time clicks.
Yes it does but, Thank You and Happy Holidays!
That one in the dog costume is a real biker. She ain’t gonna be told what to do 😎
From over on the coast, A Merry Christmas to you, too.
Ride Forever!
Merry Christmas. I just thought she'd be over her fear of the garage. She does just about anything I ask of her. She's my puppy.
Merry xmas. Wonderful Mike people. All the best, health and fun every minute.
Thank You and Happy Holidays!
Mike really is the best ! The knowledge and experience is just incredible, Mike, from the other side of the 'pond' wishing you the best for 2024
Wow, thanks! And the best to you and all of yours in the New Year.
Thank you Mike! To you and cameraman Mike! It’s always a real treat watching your videos and learning. Your wealth of knowledge and positivity is why we all tune in. Happy New Year and Merry Christmas 🎄
Wow, thanks!
CMM has a face! Great to see him! You guys rock, thanks for the fine work. Happy Holidays to you both.
Our pleasure! Thank You and Happy Holidays to you and yours.
Merry CHRISTmas, all you Mikes, and Sonya, too!
Thank You and Happy Holidays!
Merry Christmas, Mike and Mike! Take care.. Thanks for the video😉
Thank You and Happy Holidays!
Happy holidays, Mike. Cheers to you and yours for 2024 🍻
Thank You and the same to you and yours.
To Mike and Mike, all the best in 2024. May health and happiness be yours!
Thank You. And all of those wonderful things to you and yours.
MERRY CHRISTMAS, Ho Ho Ho. 🎄🎁 Thankyou for the Video’s. Thankyou
Thank You and Happy Holidays!
From Montana to you, Mike & Mike. I hope you both have a Merry Christmas! And Happy New Year!
Thank You and Happy Holidays!
Hi six, hope you fix your rk.
@@javierlsosal5445 thanks! I'll get her going one way or another.
Merry Christmas Mike. I like the way you explain things. You are a great teacher!
Thank You.
Merry Xmas Mike & Mike from a snow covered North East of Scotland here in the UK. Keep up the good work lads!
Thank You and Happy Holidays!
Happy Hollandaise! As I have not contributed in a while, and you're not talking bikes today, let me relate what happened to me today. I was out collecting obviously unwanted packages from my neighbors porches. When I got home and began unwrapping I was mortified to find one of the boxes full of dog poop! Whats Wrong With People?!!!!!
Cute.
Happy Belated Christmas, Mike and Mike. And a Happy New Year to come. Looking forward to it!
Same to you! We all play a part in making it good. Happy New Year! Let's get started.
Merry Christmas for Saskatchewan Canada bless you and yrs. Keep up the grate vidoes
Thank You and Happy Holidays!
You have a great team Mike. It’s truly a blessing to be able to enjoy working with the folks who make the dream work. Secondly, the information you’ve documented and continue to document are an invaluable educational resource for techs working to keep these old bikes road worthy. Thank you and have a Happy, healthy and prosperous new year. 🎉
Thank You for all the kind words. And may you have all the good things in life.
👍😊
Merry Christmas and thank you for all your wonderful and knowledgeable videos.
Thank You and Happy Holidays!
HOWdy Mike & Mike !
Thanks
COOP
...
Hello and thank you. Happy New Year!
MERRY CHRISTMAS to BOTH MIKE'S and SONIA !!! MAYBE a QUICK VID WITH SONIA IN FUTURE ! ALSO a VERY HEALTHY , HAPPY, PROPSEROUS NEW YEAR👍👍❤❤💜💜🙏🙏🐶🐶
Thank You and the best to ya!
Merry Christmas and Happy New Year!
Warmest greetings from Poland!
Happy holidays!
Love this channel and realy like you guys and I don't even have a older bike but if I did I would like the channel even more that you guys and right back at you I hope I get to see you out on the road
We'll look forward to it. Thank You.
Mike thanks as always Merry Christmas to all there keep on keeping on
Thank You and Happy Holidays!
MERRY CHRISTMAS & a HAPPY NEW YEAR to Mike & crew from Ohio! ....... Wish we had yer weather as my Shovel sleeps in the bedroom staying warm till spring ( hopefully early march this year) Hope to see that Flathead running in 2024..... :)
Thank You and Happy Holidays!
🎄🎅👍😊
Hey Mike and Mike have a great holiday and new year you've really shown me patience and to be thorough be the best we can be
The result will be that perfect ride. And, we'll all do nothing but improve. Have an awesome New Year.
A Very Merry Christmas for you and Mike and all of your loved ones
The same to you and all of yours.
Hi Mike and Mike! Thank you very much for the informative videos all through 2023. Your yellow Knuck is a work of art! Good luck on your Flathead project! All the best to you (Mike and Mike) and to your viewers in 2024. I'm hoping for a much better 2024. I miss California and my wife who was from Santa Rosa, CA. We both liked choppers. You guys have so much going on out there in regard to choppers and custom culture in general. There's just not a lot of that here in my part of Ohio. Build right. Ride safe in 2024. -- W
Thank You and Happy Holidays!
👍😊
@@cameramanmike2072 📷📸👍
Thank you Mike from MN.
Thank You and Happy Holidays!
Merry Christmas to you and yours Mike, all the best from the U.K.
Thank You and Happy Holidays!
Merry Christmas and Happy New Year from Russia...
Thank You and Happy Holidays!
Merry Christmas and Happy New Year Mike.......Both Pacific and Cameraman!!
Thank You and Happy Holidays!
Merry Christmas guys, hope you all enjoy bringing in the New Year.
Thank You and Happy Holidays!
Merry Christmas Mike from port colborne ontario canada. Love your videos. And thank you for videos.
Thanks for watching! Happy Holidays!
Merry Christmas Mike and Mike. Enjoy your videos, got a 1976 FLH that I’m bringing back! Your videos are inspirational. Wish I was on the west coast coast to meet you. Give Sonya a treat for me!
Will do. And she and both of us wish you a Merry Christmas.
Merry Christmas 🎄 and Happy New Year 🥳 boys 👍👍🇨🇦✌️✌️🇨🇦👍 Enjoy all your videos 👍
Thank You and Happy Holidays!
Happy Christmas to the 2 Mikes, Sonya and all. Be Well people
Thank You and Happy Holidays!
🎄🎅👍😊
@@cameramanmike2072 if I am not wrong, You guys never did a start up/sound video of Your bike, Camera Man Mike. If I have missed it apologies and if I haven't; yee might consider makeing a video off same.
🤔🧐🤨🙏👍😊💯❗
Hope you and Mike had a good Christmas and I would like to wish you a safe and healthy New Year!!!
Thank You and the best to you and yours.
Merry Christmas to you both and thank you for all the awesome videos
Thank You and Happy Holidays!
Merry Christmas Mike and photographer Mike!
Really enjoy your channel!
Thank You and Happy Holidays!
Merry Christmas to you and yours. Thank you for what you do.. Keep it up!
Thank You and Happy Holidays!
Merry Christmas Mike! Thanks for all the great videos.
Thank You and Happy Holidays!
Wishing you guys a Merry Christmas & Happy Healthy Harley New Year from Ocala Florida, thanks for all the great videos this past year!!
Thank You and Happy Holidays!
Thanks for your gift and merry Christmas
Thank You and Happy Holidays!
Thanks, guys, for the BEST MC Video series on the net! I have 2 Ironheads, a Shovel, a twinkie and 14 other bikes, you help me keep the herd rolling! Merry Christmas Sonya, don't let mike forget to give you that treat!
She got it. Thank You and Happy Holidays!
👍😊
Merry christmas and a SAFE new year and many more to come yalls way.. GOD BLESS❤
Same to you! Thank You and Happy Holidays!
Merry Christmas!!! You've helped me a lot. Thanks
That's great to hear. Thank You and Happy Holidays!
Great Job! Mike & Mike! 👍😎👍
Thank You and Happy Holidays!
@@pacificmike9501 Thank You! 👍😎👍
Hope y’all had a great Christmas, y’all are fantastic folks!
Thank You and Happy Holidays!
Merry Christmas to you too, Mike! I just purchased a 99 softail custom and your Evo vids have been a great resource. Thanks for everything you do! You're the best!
Thank You and Happy Holidays!
It just showed up in my feed Hope you had a great Christmas Mile , have a Happy New year .
We all did, hope you did and Happy New Year!
Merry Christmas and Happy New Year to you both! And Sonya also. Thanks for loving that precious pup, Mike.
Happy holidays!
Thank You. That's what Sonia is for. Her job is to Love and be Loved. It's in her job description. She plays a precious roll in my life.
👍😊
Merry Christmas, Mike and camera man Mike. 56F here in Rhode Island today. Took the panhead out for a long ride, enjoying my mousetrap I pieced together after being inspired by your adjustment video. Thanks for all the knowledge and entertainment. Looking forward to seeing your flathead come together this year.
Thank You and Happy Holidays!
Merry Christmas! Mike and Mike and Happy New Year !
Thank You and Happy Holidays!
Happy new year, cant wait to see the new video's, best wishes
Happy new year! We'll do our best.
Merry Christmas. Thanks Fellas...
Thank You and Happy Holidays!
Merry Christmas to you both Mike's. Thanks so much for all these informative videos. I hope you both have a very great and Healthy new year.
Thank You and wishing you the same.
👍😊
Merry Christmas and thank you for all your help and knowledge through your videos!!!
Thank You and Happy Holidays!
Merry New Year Mike & Mike !
Thank You and Happy Holidays!
Hi Mike,I would like to wish you a Merry Christmas and a Happy New Year to all your crew as well.
I love the videos and the pure honest approach you have..
Just wondering if you have T-shirt and caps and stuff??
Or even a series of dvd’s for each specific bike.That is Pan,shovel,flattie specific.
I find it hard to navigate and find what I specifically need for my shovel work..
It is great to see someone who actually knows what they are doing and to confirm wether I have been doing things right or not so right over the years..
Thank you so much..
Kindest regards and the highest respect to you all.
David J
Western Australia…
Thank You. Go to our website, Pacific Mike .com. in the upper right corner, it says T-Shirt Store. Click on it and you can order t-shirts and baseball caps. As for more videos on what you would like, go to our CZcams Homepage and click on the word "videos." Over three hundred will come up for you to choose from. Happy Holidays!
Merry Christmas Mike and Mike !
Merry Christmas to you.
Merry Christmas P Mike,and C Mike,and a happy and blessed New Year !!!!
Merry Christmas Mike & cameraman Mike your videos are a highlight in my life & my wla has never run sweeter as a result of my leaning from you! Can't wait to see the flathead 80 take shape enjoy your festive season cheers tim from downunder!
Thank You and Happy Holidays!
Glad to hear the flathead is coming back!
Me too. Sit tight.
Grew up in Southern California, Mike. I live in Texas now. But I'm coming out in 2024. And you're on my bucket list to meet you in person sir. Merry Christmas and Happy Near Year!!!
Thank You and Happy Holidays!
Merry Christmas and Happy New Year to you both!
Thank You and Happy Holidays!
Merry Christmas. Hope to get to meet you both someday.
Merry Christmas and we'll look forward to meeting you.
Merry Christmas to you and yours
Thank You and Happy Holidays!
Good morning Mr Pacific, Cameraman Mike, hope all is well and Merry Christmas 🎅🏻.
Great news. I pulled the 131” from my ‘93 Fatboy and replaced it with a 1996 80” Evo. What a difference! She rides like a cream puff. Installed an Ultima ignition, Mikuni 42, free flowing AC and Vance and Hines big shots and I gotta say, for an all stock motor she has a little giddy up. Of course my Baker 6 speed helps but what a joy to ride now.
Rear base gasket weeps and I hate to pull apart a perfect running engine but at 64k maybe a good time for 9.5:1 pistons, still 3.48” and mild bolt in cam like the EV13. I know the consensus is an EV27 but I really wanna keep that stock low down torque. I have a brand new set of S&S travel limited lifters and S&S quickies, I also grab a Torrington. I thought of buying a used pre ‘92 “L” grind police cam but haven’t the experience with any of these cams.
I’d like to keep it 80”, do you have a preference for a mild bump in power or do I set her back up at 8.5:1? Maybe a .030 MLS head gasket?
I do use the MLS head gaskets a lot. You like a peppy, well mannered engine? Keep the stock pistons. They are probably perfect at 64M. Freeshen it up by honing the cylinders, reringing, new hydraulic aftermarket good lifters and a Dave Mackie EV500 cam. I'm not trying to push products but you have told me what you want and how you like it. You will now have a very snappy fun Evo.
@@pacificmike9501 Perfect! That’s the plan then. Thank you so much Mike!
You're gonna love it. And, what a pretty idle she'll have.
Thanks Mike merry Xmas from minnesota.
Thank You and Happy Holidays!
Merry Christmas to you both and happy new year. Kenny.
Same to you! Thank You.
Merry Christmas and Gods blessings for you all
Happy Holidays!
Merry Christmas to Mike and Mike. 🎉
Thank You and Happy Holidays!
A Very Merry Christmas, Mike, to you and yours! 👍😎
Thank You and Happy Holidays!
Merry Christmas to you and camera ma Mike and God bless you both .
Thank You and Happy Holidays!
@pacificmike9501 thanks Mike
Merry Christmas to you guys!
Thank You and Happy Holidays!
Merry Xmas to both Mike's , be safe !
Thank You. And a Happy New Year to you!
Merry Christmas Mike and everyone else… I got out for a ride today up here in Canada and im calling it once in a 100 year chance… normally-20°c here… keep the great videos coming and bless you all in the new year 🤙🤙
Same to you! Happy Holidays!
👍😊
Merry christmas and keep up the nice video's
Thank You and Happy Holidays!
Merry Christmas and happy new year to you Mike and camera Mike. This year's videos have been awesome, very helpful, informative, and inspirational to work on my own harley, keep up the good work, and hope to see you both out on the road 😀 ✌️
Same to you and we'll look forward to seeing you.
👍😊
Merry Christmas Pacific Mike and Cameraman Mike...
Thank You and Happy Holidays!
First of all, thank you so much, I commented on your last video about my front exhaust lifter, bleeding down, this whole time I’ve been fighting the exhaust lifter, but really, the problem was the intake Lifter was in backwards, oil hole facing the wrong way.!! Again thanks so much and I will definitely be buying some merchandise to help support the channel!
Merry Christmas and happy new year🎉
I wondered if I gave you the info clearly enough. You got it! Thanks for writing back. Sometimes I never know if the problem got solved. Thanks for all of it. See you out on the road!
👍😊💯❗
Happy holidays to you guys are your families, I really enjoy watching your videos and I always give them a thumbs up. Hey Mike, let's get that beautiful dyna twin cam on the videos this year huh man??!!!...
I think you're speaking of CM"s silver bike. What does it need? I built custom wheels for it. This will require some thought.
Thank You and Happy Holidays!
@pacificmike9501 ....yes, I meant cm's dyna, my apologies....lol. I'm sure it needs nothing, whatever you guys do ill always watch Mike...
We'll do something to it.
🎄🎅👍😊
Merry Christmas!!!!
Happy Holidays to you.!
Really nice to see Cameraman Mike and Pacific Mike together. Rock on and great job with your videos. Thank you.
Glad you enjoyed it. Thank You.
Merry Christmas Mike
Merry Christmas.
We want to see more Sonja! Happy New Year!
Happy new year! She'll be glad to hear that.
Merry Christmas Mike and family ❤
Thank You and Happy Holidays!
🎄🎅👍😊
Couple a handsome young fellas right theya.
Now you funny too. Thank You and Happy Holidays!
Merry Christmas!
Thank You and Happy Holidays!
Great job camera man Mike!
He's getting a swelled head (but, he really is good at what he does).
Merry Christmas and happy New Year
Thank You and Happy Holidays!
Merry Christmas 👍🖖
Thank You and Happy Holidays!
Merry Xmas Mike...
Thank You and Happy Holidays!