9th Gen Honda Accord aFe Power Takeda Stage-2 Intake Install | 2014 Honda Accord Mods
Vložit
- čas přidán 10. 09. 2024
- In this video I install the aFe POWER TR-1019B Takeda Stage-2 Pro 5R Cold Air Intake System. First we go over the installation and then we get to see what differences were made. Hope you enjoy the video!
aFe Power Intake:
amzn.to/2HAmmmg
NEED A CELL PHONE, TABLET or ACTION CAM MOUNT? Check out Tackform for all your mounting solutions. Use my link to help the channel bit.ly/FTATack...
-------------------------------------------------
SUPPORT THE CHANNEL:
CHECK OUT www.bridgemoto... FOR YOU RACING GEAR NEEDS!
Use coupon code FULLTHROTTLEAUTO (all caps when entering it) to get $10 off when you purchase $50 or more.
WANT SOME MERCH?
You can also support Fullthrottle Auto by purchasing Fullthrottle Auto merchandise found here: bit.ly/ShopFTA
USE AMAZON LINK TO HELP THE CHANNEL: bit.ly/Fullthr...
Support Fullthrottle Auto by shopping on EnjukuRacing for your car performance needs by using this link: enjukuracing.co... , it does not cost you anything extra but helps the channel.
THIS ALSO HELPS!
Make sure to Subscribe so you do not miss out on any future videos
like this or anything that might have some automotive fun in it.
THE ENERGY DRINK (ROGUE ENERGY) OF FULLTHROTTLE AUTO:
bit.ly/2ITHDaP
COUPON CODE: FULLTHROTTLEAUTO
Check out my other channel:
/ t3gtech
-----------------------------------------------
SOCIAL MEDIA:
Instagram
/ fullthrottle_auto
Facebook
/ fullthrottlea
Wheelwell
bit.ly/1SmICl7
-----------------------------------------------
EQUIPMENT I USE:
CANON M50: amzn.to/30l6Rut
GOPRO HERO 8: amzn.to/2Ph1lT3
ZOOM H1 MIC: amzn.to/2DsA6lL
SD CARD FOR M50: amzn.to/30izng8
SD CARD FOR GOPRO HERO 8: amzn.to/3k1obMM
-------------------------
Music:
-------------------------
INTRO SONG:
3rd Prototype - Dancefloor [NCS Release]
• 3rd Prototype - Dancef...
[3rd Prototype]
• / 3rdprototype
• / 3rdprototype
• / 3rdprototype
1ST SONG:
Elektronomia - Vitality [NCS Release]
• Elektronomia - Vitalit...
Elektronomia
• / elektronomia
• / elektronomia
• / elektronomia
• / elektronomia
2ND SONG:
Music provided by Argofox
Frame Away - Beyond [Royalty Free Music]
• Frame Away - Beyond [R...
3RD SONG:
Music provided by Argofox:
Ghost'n'Ghost - Lighthouse
• Ghost'n'Ghost - Lighth...
Connect with NCS:
Snapchat: ncsmusic
• / nocopyrightsounds
• / nocopyrightsounds_
• / nocopyrightsounds
• / nocopyrightsounds
• / ncsounds
• bit.ly/SpotifyNCS
-------------------------
Also that last drone shot was dope.
That was thanks to T3G Media!
The rev hang is the worst downside for me. A tune and maybe the cdv delete will be my first mods. Great channel!
That sounds like a good start.
Thanks a lot!
I str8 Pipe mine with the that same intake and it sound like a beast 🔥🔥🔥
I’m thinking of doing the same if the borla exhaust doesn’t sound good with it
@@Septemberizmine which one? Axle back? Cat back? I was really close to buying the magna cat back but I didn’t pull the trigger.
Axle back
Brother I've had 3 Honda's that's a beautiful car. I personally own a 2017 Accord coupe 2.4 I-VTEC. To make your aftermarket intake work properly you must have your CPU programed for it, to work properly. Beautiful Car
Stephen Murphy first off, thanks a lot for watching and commenting. Yea I know I need to get it tuned, I will one day. I love the car personally. Glad to see someone else has the k series manual.
Stephen Murphy NOT TRUE. THE CAR WILL SENSE THE EXTRA AIR AND MAKE ADJUSTMENTS ACCORDINGLY. Makes no sense that the cars main computer is going to be static in its program instead of being variable. Cars go through changes ALL THE TIME. Temperatures, the way you drive.
Thanks for this info. I have the same exact car and year.
Sounds deeper for sure - nice video this is some Top Gear shit lol.
It definitely is a lot deeper. The video doesn't demonstrate that the best on some of the shots. Thanks for that compliment. I am working on having that quality LOL. Thanks for watching and commenting bud!
I am expecting the exact same intake for my 13 i4 this week.. So no Hp to expect? :(.. thats sad for that money.. anyway will just try to be happy with the sound though! Also I should go for the dry or oil ?? here the climate is dust and hot..!
thasleem thayyib first off, thanks for watching and commenting. According to this write up from the people at Mishimoto www.mishimoto.com/engineering/2016/11/filtering-right-stuff-dry-vs-oiled-air-filters/ dry based filters will be better for catching contaminants.
Wow! Bravo Sir. Great video with lots of details and very helpful. By any chance.. have u named her(your car) yet? Hehehe
Thanks a lot! I don't have a name and that's not something I do.
Thanks for watching and commenting!
I was told that cold air intakes help gas mileage, is this true? Only getting the HP wasn’t worth the $350 if so.
Great question. I feel you on that. I have heard similar statements. However I haven't seen any actual testing to prove that is accurate.
Sorry I didn't have a more direct answer.
Thanks for watching and commenting.
would this car drone/be annoying if I were to add this and do a muffler+resonator delete? I have 2016 v6 coupe touring
If you delete the resonator it would yea since the resonator is mainly there to eliminate drone. Where if you remove the mufflers it would just get loud but shouldn't affect the drone.
So if you are looking to do this, I'd say do a muffler delete and keep the resonator if you are concerned about drone.
If you look at Takeda’s own website and their own posted dyno graph their intake lost 6hp at power peak over stock intake, when running stock exhaust. 169 at the wheel stock intake vs 163 Takeda short ram. Dyno says it was done in Sport auto.
Safe to say that the numbers at the bottom don't make sense compared to looking at the actual graph. The graph shows a clear gain throughout the whole rev range quite considerably.
To get a clear answer on what is actually accurate I'd recommend calling them or emailing them to see what they say.
Did u get it tune after the intake installation. I have a 2016 accord and the takeda Intake was causing a misfire
I did not get it tuned. I had no misfire issues. I got it tuned this year with my Ktuner that I ended up installing. No issues with or without the tune.
Sorry to hear that you did have issues. It's possible something else could be causing the misfire. Hope you get it figured out.
Thanks for watching and commenting.
Wish one is better kn or sekeda
If they're both short ram like this one, really either one would be the same. If you can get a cold air one that AEM or DC sports offers that would be the better option.
Hope that helps.
Thanks for watching and commenting.
Can you make a guide for this car to install an oil catch can? Just where to connect the thing.
I'll definitely look into it and see what I can do.
@@FULLTHROTTLEAUTO Neat, looking forward to what youll do to this car next.
Why the need for catch can? Is oil pooling up behind the throttle body or crankcase ventilation poor?
@@johnsimmons8456 In case you didn't know, after prolonged use in gdi engines, the recirculating fuel and oil builds up on the way back to be burned. Covering tubes restricting flow. Build up on the intake valve. All causing the engine to idle and drive roughly, decreasing fuel economy and engine life. You may not experience this for the first 50k miles or so, but as it builds up, you will notice it and it will cause issues further down the line. The oil catch can helps decrease it enough that you wont need to worry about using valve cleaners every oil change, but instead just need to dump the contents in the can every other oil change.
@@AznTony360 In that case why not use a catch can with a built in PCV valve like the one mighty mouse sells. What kind of catch can are you using and how did you route the clean and dirty sides?
Hey! i know this video is somewhat old and Im not sure if I can expect a response but I have a 2.4 coupe and the intake will for sure work, I'm just curious on the purpose of the coolant hose and vacuum hose removal and replacement and what the purpose is. other intake installation videos I've seen haven't done anything with those hoses and I want the installation to go smoothly as I'm very much a novice with car mods, all I've done so far is spacers lmfao. Im just curious as to the purpose of that and if its necessary. thanks!
These lines are connected to the stock intake. Since you're replacing the intake the stock lines won't work and you have to utilize the supplied new lines. Hope that helps clarify.
Thanks for watching and commenting, truly appreciate it.
What did you attach the coolant hose to? I saw the vacuum hose get attached to the body of the intake but what about the coolant hose?
As the video says, remove the old coolant hose and use the new supplied one and plug it back in using the old clamps.
Thanks for watching and commenting.
The takeda intake was causing a misfire at about 5000rpm. So I decided to reinstall my stock intake and it fixed the problem. My question is did you get it tuned after you installed it? Did u experience the same problem? Did the ktuner fix that? 2016 accord 6spd
Sorry to hear that happened. Great questions.
No I never had that issue. I did not get the car tuned when I installed it. It was a long time after installing the intake that I tuned it with the Ktuner and no issues with or without the tune.
Thanks a lot for watching and commenting.
Thanks for the feedback. Yeah it's a weird situation because when I would get close to the 5k rpm it would misfire. So I decided to take it off and put my stock one back and that fix the problem. Its 2 years newer but the engine and everything is practically the same. What model do you have? I have the ex. Once again thank you for the videos. I also have the silver bullet throttle body spacer but never got around to install it because of my misfire problem.
@@mmmm-ui4rp no worries. Sorry I didn't have more info on that.
I have a 2014 LX.
Good ole hot air intake !
Yea yea. Works great!
Thanks for watching and commenting.
What size is that vàccum hose from the engine to the intake. I want to eliminate that extra stuff. My intake did not come with that hose.
Thanks again
It's a 5/8" hose.
Did you remove stock box bottom area @ 4:27min. Don’t see the bottom air filter box
If you mean the piping the goes from the front and then under the battery towards the fender, no. That stays there to still get the air from the outside.
Thanks for watching.
Fullthrottle Auto got it. Thank you 😊
what exhaust are you using ?
It is a Tsudo dual exit exhaust.
Here is the link for the video I made czcams.com/video/q0Wjr1DlnUs/video.htmlsi=onXYXl8tVIQLGCrO
Thanks for watching and commenting.
Sick video bruh bruh
Thanks a lot. Thanks for watching and commenting!
I have a 9th gen v6 I wanna install an intake on I kinda wanna do a cold air intake but then I won't be able to drive in the rain because my car is hella low lol so that's what got me to looking for some short rams
Any kind of tuning that needs to be done after the install or is it plug and play ???
Its plug and play. However for actual increase in power you will want a tune as I stated in the video.
Where did you get the grill for the accord
That was an eBay purchase. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F231488777466
Thanks for watching. Hope you enjoyed the video.
Hi there.
I’m looking to get one for my car, what would you prefer, the Takeda or the K&N? I’ve seen a couple videos and I think the Takeda makes more noise.
Thanks!
I haven't heard the K&N but I think if you go with either one would be a good choice.
Fullthrottle Auto Thanks for your reply buddy. Really appreciate your videos, they are a great help, keep up the amazing work. 🔥
@@hassaanrasheed1862 Thanks a lot! I truly appreciate that.
Do not feel more abrupt changes in speed with the intake?
No I did not.
Thanks for watching and commenting.
After installing the intake, what/how do I adjust/do to feel change in speed? You also mentioned tuning? Please explain.
Sounds real good 👌🏾👌🏾👌🏾
I love your videos man,I have 2014 accord sport ,current mods are sp2 catback exhaust system,afe cold air intake,lowered on H&R lowering springs,Yokohama performance tires and aftermarkets wheels.
Do you know why the gas pedal response feel different now? You have to put more pressure than before when it was stock,kinda feels like the car is slower,maybe needs a tune? Thanks
First off thanks a lot! I truly appreciate that.
It's possible that you might need a tune. However after putting on the intake and exhaust on mine, the throttle response feels the same with no tune.
It could be possible that the hoses for the intake might not be properly sealing causing a leak which then in return causing the electric throttle body to not respond right. (I am not sure if this could be true, just throwing an idea out there)
@@FULLTHROTTLEAUTO you welcome man. And yeah that might be true but I have heard from to many people that air intake don't do much difference per wise,only gives that sound and feel like the car is alive but usually if you have a exhaust and cold air intake,you definitely need a tune,you ever thought about getting the ktuner or hondata flash pro? As much as I love this honda accord I really thinking sellin the car and getting something more fun,like a honda s2000,one of my dream cars or acura rsx type s .
@@joey1458 I have a ktuner. I might get it tuned N/A. But I'm ultimately waiting on a turbo kit I have my eyes on. Just have to save up $4600.
S2000 is a great car. I personally would keep the Honda for a daily and pick up a project. But I know not everyone can do that.
@@FULLTHROTTLEAUTO yeah slickfab makes turbo kits and thats awesome man,hope it goes well for your honda.How the ktuner going so far,any difference in acceleration and speed?
@@joey1458 I haven't done anything with the tuner yet. I have it, just haven't set it up and tuned the car.
I'll do a video if I end up deciding to do it on the car before the turbo kit.
Bruh I did this not knowing my OEM intake tube was ripped 🤦🏻♀️
That'll cause some issues. Guess the upgrade was well worth it then.
Thanks for watching and commenting.
@@FULLTHROTTLEAUTO it makes sense why I had shit gas mileage but ima see how it is now :D kinda glad Ik why now, Thanks for the vid!!
Guessing this can't be done with a v6?
There is a v6 intake. This one is for the k24 though. But yea you can get an intake for the v6.
Can this be done on a 2016 accord sedan automatic 🤔
I don't think it matters if its automatic or manual, just needs to be the 4 cylinder 2.4
Where did u purchase the grill?
It was an ebay purchase. From what I can tell it's no longer available. Which is good because the quality is not good.
Thanks for watching and commenting.
Need. turbo. ✌🏼💫
Agreed! One day.
Would you get a throttle body spacer?
I did see recently that aFe has one. Honestly not sure. I know that there is a lot of people saying out there that they don't do anything, even though aFe claims they have seen gains from theirs.
It is something I have been going back and forth on. Maybe one day I might give it a try to see if there is really a difference.
Did you remove air duct ?
If you mean the one that starts from the front of the car and goes by the wheel well, no.
$300 to change the noise? Just put a cutout on it.
No doubt. To each their own.
Hot. Great video! Love the new sound. Maybe it adds handling, not HP? :)
Thanks a lot! Yea maybe it was a handling upgrade 😜😅😂
I saw the video long ago, but hopefully if you still own the car and drive it aggressively, you should've deleted the CDV a while ago.
I do have the car and do drive hard. I don't have any issues with the clutch delay valve to be honest. However I do have an issue where I quick shift and it'll grind once in a great while. I might do that later just to see what the difference is.
Thanks for watching and commenting.
@@FULLTHROTTLEAUTO Yeah, definitely upgrade the transmission fluid and delete the clutch delay valve from the clutch slave cylinder, if possible. My Honda dealership wouldn't warranty my powertrain, and I eventually ended up "fixing" my transmission from 2nd gear grinding and some lockouts. AC Delco Synchromesh friction modified transmission fluid and the clutch delay valve, maybe even with braided lines will help greatly!
@@FULLTHROTTLEAUTO I also have the TWM shift cable bushings, but not the short shifter because I've heard mixed issues about running that in the gearbox.
Grille?
?
@@FULLTHROTTLEAUTO where did you get the grill to your car?
@@vonniev0n oh. It's an eBay purchase and I don't recommend, extremely cheap and just simply not a good quality option.
Thanks for watching and commenting.
Straight pipe that chit with some magnaflow dual exhaust youl get some noice
Already done. Thanks for watching and commenting!
Plz change the appearance like the grill and shit
I am looking to add the front lip, side skirts and back lip and also coilovers once I have the money.
The grill is not changing. I might do a slight adjustment to it if I can find someone who can do what I want but otherwise that is staying.
Thanks for watching and commenting.
Terrible shifting dude.
Thanks bro!
@@FULLTHROTTLEAUTO we all know its the rev hang this car is notorious for.
@@DJEarlThe3rd it's all good. They're probably right, my shifting for sure is terrible. One day I'll get better.
waste of money
No doubt
@@FULLTHROTTLEAUTO I'm sorry but they really are I work as a mechanic and they make some noise but that's about it ,, intercooled ,forced induction or leave it alone... Horsepower claims with these puddle sucker intakes are highly exaggerated