Review & Usage Demo: Black Laser engraving marking paper
Vložit
- čas přidán 24. 08. 2024
- Amazon Affiliate Link: amzn.to/3RPC9TQ
Price as reviewed: $20 (for 5 sheets)
5Pcs Laser Engraving Marking Color Paper，Black,14.2"*9.4", LAKIX Laser Engraving Marking Paper, Laser Engraving Material for Glass, Metal, Ceramics,DIY Crafts
It took me a bit of playing around to figure out how to use these guys effectively.
1. Cut to size.
2. Soak in water 30-45 seconds). Transfer to your object like a decal.
3. Let dry.
4. Laser engrave. On my 3W diode laser, I used full power. [This melts/sticks the black covering to your base material.]
5. Soak in water again for ~ 10 minutes, scrub off the non-engraved remainder with a blue scrubby sponge.
If you want to use it on something that can't be soaked in water, you may be able to just wipe with water, or leave a damp paper towel on top of it.
For this specific paper, the color you end up with is more of a dark gray than a true black, and it works best on light colored substrates.
Be prepared to burn through a few test pieces to get your laser settings right and get experience with the decal style transfer and soak/removal process, but once you get it down the results are quite good.
I put a plate I had marked through the dishwasher and it came through one wash cycle with no problems at all.
Great straight to the point. Made my first use of the paper easy. Love the no time wasted approach.
This marking paper isn't for use on metallic surfaces. It's great for most other smooth surfaces, stone, ceramic, glass etc.
Daja was my 1st... 2 xtools later.. daja dj6 made me realize I loved laser engraving xtool d1 10w pro & now f1
Your refreshing, straight to point ❤
Thank you for making the test. 😉🇧🇻
Which material is the Metal piece ? Aluminium? Because Aluminium needs another type of laserbeam. Even with a 20 watt laser using Marking spray. The Aluminium is a problem. With 454nm laserbeam. You need 1064nm.
Yes, it was aluminum.
Place the baking paper back over the top and use card scraper to sauger water out then dab dry ?
Yes, I expect that would work as well.
Full power speed?
Creo que solo funciona en vidrio por lonque he visto en varios videos 😅
La marca ha permanecido en el plato durante múltiples lavados, por lo que parece funcionar también en la cerámica.
Whatis full power?
I don't remember the exact specs, but it is a diode laser so probably 3-5 watts