An Adorable EDC Bowie Knife Build | Part 1 (w/ New Tool Sneak Peak!)
Vložit
- čas přidán 21. 08. 2024
- This 6'' Bowie Knife will be how we ring in the new year! Thanks everyone for your support of the channel and an awesome 2023!
⚡ComMarker B4 20W Fiber Laser - commarker.com/...
Part 1 - • An Adorable EDC Bowie ...
Part 2 -
🙏All Social Media Links: linktr.ee/redb...
🔩 Other Items Used:
VEVOR 132 LBS Anvil (Vevor Site) (Discount Code VVSALE5 for 5% off) - s.vevor.com/bf...
xTool D1 20W Laser Kit - www.xtool.com/...
Long Gooseneck Light - amzn.to/3fcEyYO
3M Versaflo Respirator - amzn.to/3HLbz89
BA Vander Sander (Promo Code = redbeardops) - becksarmory.co...
Push Stick - www.mcmaster.c...
File Guide - brian-bump-3ht...
🗡️ Previous Builds:
Low Twist Bowie - • FINISHED - My Best Att...
Samurai Sword - • A NEVER Before Seen Tr...
⚙️ DIY Builds & How-Tos:
Homemade 30 Ton Press - • Homemade Hydraulic FOR...
DIY Heat Treat Oven - • How to Build a Heat Tr...
DIY Disc Grinder - • DIY Disc Grinder Build...
#redbeardops #knifemaking #bladesmith
Music from Uppbeat (free for Creators!):
uppbeat.io/t/c...
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
This should be a fun build! Hope yall stick around for the ride! Here are all my social media links - //linktr.ee/redbeardops ... Also I'll put some links (affiliate) below for items I used in this build so far:
⚡ComMarker B4 20W Fiber Laser - commarker.com/product/b4-laser-engraver/?ref=HSxwS-ki0lqGqf
🔩 Other Items Used:
VEVOR 132 LBS Anvil (Vevor Site) (Discount Code VVSALE5 for 5% off) - s.vevor.com/bfQD2H
xTool D1 20W Laser Kit - www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&
Long Gooseneck Light - amzn.to/3fcEyYO
3M Versaflo Respirator - amzn.to/3HLbz89
BA Vander Sander (Promo Code = redbeardops) - becksarmory.com/becksarmory.com/product/b-a-vander-sander-kit/?ref=1082
Push Stick - www.mcmaster.com/catalog/128/4008
File Guide - brian-bump-3hth.squarespace.com/fileguides/brucebump
Red Beard Engineered Here - www.youtube.com/@redbeardengineered
For those that "cringe" perhaps they should look inwardly and fix their personal issues... Learn what you can from everyone. Everybody has something useful to offer - you just have a lot more to offer than most. ;)
Cheers sir
as a fellow blade smith of over 30 years, i still learn new things from watching others work
Thank you sir! Me too!!
I’m not trying to follow an engineer into knife making. I drink way too much for that. I’ve been making knives for a few years now though; I believe I’ve found my niche and where knife making is really enjoyable, and that’s in small knives. Like pretty freaking small 5 to 7” total, and not bulky on the hip and you don’t feel like a doofus carrying it out in public. I’m enjoying knife making again. The damascus I use to make, I’ll forge again soon, with an 8” billet instead of 18”. Little knives are my way to maintain sanity.
nice!
Its looking to be a very good bowie so far and the laser results seem very good.
As someone who used to work with lasers 'back in the day' you do need to be careful what you blast away with them. Metal's are generally fine and won't gas off too much nastiness but in any case you want to have quite a draw of fume removal, especially when you're doing anything organic underneath it and discourage the small people from playing or looking into it! Plastics can be a mixed mess, most of them are pretty stinky and offensive with some mildly poisonous or irritating gasses, when you start getting into stuff like PVC's though they can put off gasses that will outright kill people extremely quickly and the survivors will be maimed for life.
Just being we're knife makers, everything we use is hot, sharp, full of particulates and probably poisonous, but I don't see a lot of reviews on lasers covering what professionals know they can do and while they are pretty cool things they're a whole other subject matter when it comes to material science. All the best for 2024
Good stuff! Thanks for the info and reminder
Jeez that shop’s looking great, Red. The knife is looking real promising too…👍
Thank you! Cheers sir
I always learn from your videos. This time I learned that I covet that waterfall attachment! Perfect plunge lines!
Lol, it takes a little practice, but I like it! Cheers!
Nice !
Great video as always 😉😉
Thanks 😋
Nice build James. Very old old saying. The more you do it the better you get. I'm sure people who watch your videos benefit from watching. I learn something from all the knife videos i watch. Stay safe. looking forward to next video.
Thank you greatly Will! Cheers
hi james great video man! you are getting really good at this knife making thing LOL. I love your work, i just got my ribbon burner forge running last night,. hopfully will get better at forging looking forward to prt 2 that laser is great !! does a really clean job
Thanks man! I'm trying! May be a few weeks on part 2; lots of projects! lol
No pun intended but that laser thing is sharp!
LOL
I am quite happy to see that you are using heat treatment oven you've built. I am trying to build one almost exactly the same way you have built yours. I must say that trying to cut the brick with a router with a straight bit was... it was educational and my dogs are still laughing about it.
But regardless of my learning experience, seeing that heat treatment oven in this video boosted my confidence to continue with this build. Thank you for that.
lol, not an easy task for sure... makes a heck of a mess. Yep, so far so good with the oven! No issues to date.
congrats on the growth! Can't wait to see more about the laser!
Thank you sir! It's basically science fiction in my eyes....
Great vid as always, looking forward to seeing the finished blade :)
I really like the laser etch mark it looks so more crisp and clear almost like 480p being the old mark and the laser being 1080p and up, great idea and will be watching the product review when it comes out :)
Thanks! I 100% agree... it's very crisp!
Next
Working on it!
Well, for whatever reason, my first comment was deleated. Take a look at AmeriBrade 2x72 grinders. Question. Is the magnet on your surface grinder made from a maglock door security system?
Thanks for what you do. 👍🍻
I've heard those are nice! The magnet came from NorthRidge as well... not sure what it was designed for, but it looks to be for a mill or surface grinder. Very nice piece.
Build is looking great! Will you have plans for the height gauge/scribe available for purchase? That way we can print them down here and not pay an arm and a leg for shipping 🇦🇺
Right now I have the plans (print files) available for my patrons on Patreon or you can buy them on Etsy. Eventually they'll be in the open source library, but that will have a ~2 year lag.
Patreon is the cheaper of the options - www.patreon.com/posts/3d-print-files-93074662?Link&
You should reach out to Brian House about teaming up for manufacturing with your scribe jig.
You didnt mention it but did you thwrmocycle after your normalizing for grain refinement?
Basically did this - czcams.com/video/TBIiWwawKSY/video.htmlsi=rrFteqPiWWRvgorH
Just finished work for the week and James has a new video out.
Awesome! 😎🫡
Hope you enjoyed it! Cheers!
What are you using to cover your tools? Do you have a link to the material? Are you weighting the corners?
Just some vinyl table covers. Nothing fancy. Not Weighting the corners. amzn.to/3HdiIiB
Thanks! @@RedBeardOps
Excuse me, but what is that white stick you’re using at the grinder? Looks like chalk.
Its tephlon. I put a link to it in the description! Cheers! - Push Stick - www.mcmaster.com/catalog/128/4008
How come you stopped using your mill for the shoulders?
I try new methods all the time. The last knife I did I used the mill.
hate to burst that bubble, but your "new invention" has been around for about 400 years. They are called "VERNIER HEIGHT GAUGE" and are really really a common place tools
Never thought it was new ;) ; been seeing Nick wheeler and Karl Anderson use one for years. My specific design of a 3D printed jig to attach to a 3-2-1 block is what I'm considering novel.
youd have a point if he actually said he invented it. the problem is he never actually said that he invented it 😂