How to replace 2006 Saab 9-3 crankshaft position sensor
Vložit
- čas přidán 11. 09. 2024
- How to change the crank shaft position sensor on a 2006 Saab 9-3 (applies to 2003-2011).
Tools required:
Crankshaft position sensor
10mm socket
12mm socket
E-14 Star E socket
Socket Wrench
4-5inch socket wrench extender
CRANKSHAFT POSITION SENSOR (Bosch)
rover.ebay.com...
10MM SOCKET(individual socket)
rover.ebay.com...
12MM (individual socket)
rover.ebay.com...
E-14 STAR E SOCKET (E-socket set)
rover.ebay.com...
Hope this video helps people
Thanks for watching
Always appreciate when somebody makes a vid to help. Sadly, once that music started I was out. I saw enough though, so thanks.
You dont need to take the starter out at all tho
You can easily change that sensor from the top 🙂
Great video thanks!
Good Video but massive shame about the loud background music!
MY LIFE BE LIKE
Finally found a good detailed video on this. What is the sensor under the starter for?
oil level
HelloBrockster,
Thanks for your explanations, I'm looking for this part but, I can't find it, is your car a 1.9TiD 120ch diesel engine?
Thanks for helping
Just to make sure, what is the engine of this saab, is it 1.9Tid? And if not are the sensors same on every engine?
superb video. thx for upload. what was the problem and did the exchange solve it?
Far doesn’t start would be a reason why to replace, cranks but doesn’t start
Giant pain in the ass just to remove a sensor.
I have 03 Saab 93 with the b207r are the crankshaft position sensor universal
I cannot for the life of me find the top screw for the starter
Which engine? Is it the 1.9 tid or 2.0T?
Hey man! Just wanted to say thanks for the video. I recently just bought a 2006 Saab 9-3 2.0 Sedan last Saturday and the following day the car stalled on me on the side of the road. It wouldn't shift into gears. The reverse would work but I couldn't go forward. I got the same code "gear box malfunction" and I was worried my transmission went out since I notice it was running pretty rough. After I let the car cool down the car started up just fine and drove back home. I dropped it off with the mechanic today so I hope it's only a sensor problem. Does this sound like the same Issues u had with your car??? Thanks
update to your car? what was it?
He sold it the next day. Man no responses whatsoever. Thumbs down.
Where is the camshaft position sensor located on the same model??
Need to know also
@@jimmiewilson4897 I was told by a Saab mechanic that there is no cam sensor for a Saab 9-3 4 cylinder. The 6 cylinder however does have one. It can still give trouble codes even though the car doesn't have that sensor.
@@dwdw6752 This is true - there is no camshaft position sensor on the B207 engines.
What’s the E-14 socket for
i have a 2005 9-3 i can't find the camshaft poison sensor location do you know where is located please help me on this one please..
It's located in the same place as this one
There is no camshaft position sensor on the B207 engine.
You jnow were the camshaft sensor in that model is by any chance
There is no camshaft position sensor on these engines. The ECU determines the position of the engine by using the crankshaft position sensor and by measuring the ionization current of the combustion via the spark plugs.
say boss question if I have to keep giving it gas foi rit to stay on and it dies when I let off gas coukd it be this
It very well could be. It is only a $20 part. Might as well replace it.
that first sensor you see when you get under the car. what is that
Barney stinson what sensor is this
I'll give you an "e" for effort. Vertices position and that music. Not cool.
Better than an F! Lol
Frustrating video mate. What’s with the music?
Did the work himself. Chose to use a cheap part. Strike three.