Internet, W/O Internet and Manual | Control it the way you like | IoT projects | JLCPCB | Ubidots
Vložit
- čas přidán 10. 07. 2024
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
In this video, I have shown to make your own Internet and Manually controlled home automation project along with the real-time feedback.
Not only that, you can also control the appliances without internet with your regular electrical switches
For more information about Ubidots, refer to bit.ly/2VWzTMb
Subscribe now to watch some amazing videos coming up soon.
bit.ly/techiesms_youtube
_________________________________________________________________
Important Links
You can Download the code,PCB design and every other details form this project from my website
techiesms.com/iot-projects/es...
Configuring Ubidots with Google Assistant and Alexa - • Voice controlled Appli...
Internet and Manual Automation using ESP8266 and two way switches - • Internet & Manual Cont...
_________________________________________________________________
Components List
ESP-32 development board - amzn.to/2LvBkhI
5 volts Non-latching Relay - amzn.to/2M4LKUX
Hi-Link 5 volts Power Supply - amzn.to/2URBkfg
Two pin terminal connectors - amzn.to/2UT2TVk
BC547 transistor - amzn.to/2Akuqpl
Buzzer - amzn.to/32F1rZq
_________________________________________________________________
Now you can get free PCB with every order of techiesms T-shirt or techiesms pocket notebook.
You can buy the merchandise from here,
techiesms.com/merchandise/
_________________________________________________________________
Buy the components from here
Visit my Amazon Storefront for purchasing any components you need for this project or any other project :-
bit.ly/techiesms-Amazon-Store
_________________________________________________________________
Subscribe Now :- bit.ly/techiesms_youtube
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
_________________________________________________________________
#techiesms
explore | learn | share - Věda a technologie
Wow bro.. I think this is the only one video on the CZcams describing such a awesome home automation project.
Bro carry on and make more and more stuff..
It’s is the only one
We did lot of experiments for this logic
@@techiesms yup. I have said before you re the "king of IOT" and you deserve this.
Actually I have a qsn that is the esp board is reliable?In this project if the esp board fails we can't control manually
@@chandanbalsamanta5972 add another two switch to the relay
@@techguyz5916 Lets Assume We have a two way switch connected to Relay... If ESP Fails no issue... But if ESP is running in that case how would you read the switch status
@@techiesms where I can find its schematic file which I can print?
Hi Sachin, Amazing work!
You can improve the facility for this project.
If the board stops working correctly or stuck in some situations. you will completely lose your control over manual too.
The only solution is a two-way switch. In the case of device failure, you have control over the manual in this case.
Feeling Great to see this. Your Regular Follower from Gujarat 🔥
bhaiya ek he to dil hai kitni baar jitogey
😍😍😍😍😍😍
Excellent bro waiting for this tq so much. All the best 4r Ur coming videos
As per my request on last video! Nice work buddy! I didn't get time to work on it! U made it!
Now just share it with others
@@techiesms As per my request on the last video! Nice work buddy! U made it.
But make detail video to understand its codding also.
And make it for 8 realy & 2 dimmer for fan along with Led display with some more sensor data with date & time.
And I want to thanx for your Hard work.
You are a legend bro... love your work...
Finally you got it
Thank you so much
Hi, During this lockdown tried out your project on a breadboard which works absolutely fine on the Hardware front. i.e if i switch off/on the light it updated the switch on Ubidots. but I am having a problem on Ubidots when i click on the switch on ubidots the light does not turn on can you suggest as to what am i doing wrong?
Nice work there, I really want to try that now.
The best innovative project on your channel brother ..keep it up bro
Excellent !!.
Hi friend, you are just amazing. We love your work. You are king of IOT
Can you add adafruit mqtt library, and chane code according? Ubidots only 30 day free, It is not logical to pay $ 50 a month for a DIY home automation system
Best video I have ever seen for home automation on CZcams love ur videos very much 😍
Thanks man
Now just share video to share knowledge
@@techiesms yeah for sure 🤟
thank you for your video,
its relly helps me lot
Awesome home automation 😍😍
great work bro..!👍👍
Hi
I have produced the gerber file esp 32 does not fit exactly the pins on the bottom does not fit this gerber file is correct
please inform me
Thanks to make video on my suggestion 😊
nice one bro....good work.......awesome explanation.......thx
Great work..👍👍👏👏
Awesome Sir, I liked it a lot. Thank you sooo much for inspiring me with your new videos
If this inspired you then share this video to inspire others as well
Excellent sir...
Concept is awesome. But Ubidots plateform cost is to high. Better is if we do on sinric, and if we are using Alexa that makes everything easy. With voice and mobile control also
bro i need atleat 8 relays per board ,how can i do it with this method?
Who's those guys which dislike to video, Kaha se aate h ye log. BTW bro your hard work is appreciable Sachi dil se. Love you😘😘😘😘😘😘😘
you say this because u may be happy with this but there are people who know to do better.
excellenet!
How do you get a feedback that the load is off "even if turned off from external source"?
Is this work when esp is damaged and works the switch as normal switch
how can we use analog-multiplexer in this project to monitor the different type of sensor output in the ubidots dashboard,
Yup the kind of project i was looking forward too..in case we need to change the parts then how to do without resoldering the pcb?
Yes it's a perfect automation system.. Congratulations..
Thanks man
Now just share video and share knowledge
This is for a particular board. In my house there are so many board. How can I control them from a single device
Wonderful
What is that SW1 and when I try to export the greber file it shows incomplete connections.
Nice concept
Sachin sir, can you ad dimmer switch circuit in this board
Video Coming soon.....
@@techiesms thank for fast reply and thank for making this type of vdo .
I want same question & some other also.
Nice video
great project thank you
but I hope you teach us how can integrate ESP with Google assistant without ifttt using Google console
Hi can we use this for esp8266 board with same programming ?? Please tell me ASAP
Hello sir..
Well after ordering all th necessary components fr home automation and assembling them i connected it to my bed room.... For a test run so that i cud then order ur Pcb desgin through JLCPCB... Nd do a permanent assembly...... Although it works absolutely fine bt.. Sometimes it does not connect nd i have to cut the power nd restart the circuit again...
Can u tell y this is happening
Genius bro
i have designed same home automation project of internet and manual automation with feedback, i have designed this with nodemcu...
i have changed the defined pins n uploaded the program, after uploading the program the relays are trigerring automatically with some time delay......
will u tell me wt is the error??
What is the max load ofeach relay?
waoo bro on line and off line...wonderful...project thnks for sharing
Thanks for appreciating
Now just share video and share knowledge
Alot hardwork and time is needed for such amazing things. Alot frustrating result arises during total process.
Why relay flickers while powering/booting esp32? Pins goes high and low during boot.
Need solution please!
Hey bro, i have a doubt regarding this
If we want to control a fan with a regulator then it should be having variable potential so will we do that?
Awesome video sir. I try to make for my IT lab. 😇😇😇
Do share the video with me after installing
Okk sir
Awesome
Its really awesome bro
share video, share knowledge
Hey @techisms
Can we control it without the help of Ubidots?
so that we can use it with our custom designed app or our custom designed web browser...
Can we add more switch to it for example if I want to automate my all home appliances can we do it using PCF8574 GPIO Extender ?
excellent broooooo
i need this
Great
Now you got it
Now just
Share video to share knowledge
As per all viewers request and demand please add Dimmer in this projects. Thanks again and again.
help please when that problem appears
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v8b899c12
~ld
Bingo...You know what I am trying to say. Thank and keep updating, adios
Hi.. cool video always wanted to something similar.. Can you please tell me if switch is off can we still turn on the bulb using phone? And does it also support alexa?
Yes we can
👍👍Amazing ♥😊
Love it✔😘
Great
Now just
Share video to share knowledge
@@techiesms sure
which shipping method are you using for your JLCPCB order ??
Please also do with google assistant
by the way loved your all videos
Can I get pcb and code for the same
Nalla iruku
Can you please tell me how can I join multiple number of these boards to one smart hub which will finally connect to alexa and wifi-router?
Sir instead of ubidots can i use adafruit for this
Hi ... how much ampere or watts this project can stand
hi bro . plzz tell me how to program 2 nodemcu . me ak home Automation bana rha hn . but mjhy us me 2 dimmer ki requirement hy .
agr ap mjhy bta skty hy ka 2 dimmer kesy bana ga
me na arduino per banaya hy . but ak time per ak hi chal rha hy . 2no ak sath nhi chal rhy. agr me chalta hn to wo bilink krna lg jata hy . plzz help us
Can we add timer function for it?
excellent video, In this can we add the feature like in office when we will enter and mobile get connect to office wifi my computer will turn on automatically
Can attached ttp223 touch sensor instead switch
Hello. Can I purchase all component from
You ? Wat about the application can we have a customised one ? Thanks
Hi Techiesms,
Thanks for the excellent project, Can i use esp8266MOD instead of ESP-32 development board?
@techiesms can you show how to connect with main wire. Because i am bit confused with the connection into the switch board.
Hi Gerber file says incomplete connections
Does it have any problem
Or i just need to skip that error
Ask him the question in WhatsApp by using the no. Mentioned in the description.
Is this possible to bild with nodemcu?
Awesome home automation
i already order but some components not available in KSA
Sir I want 2 relay output and 1 AC dimmer in the same circuit ..
I tried a lot but it is very confusing to design the PCB again .. please help me
Bro why can't we achieve these features with esp8266 ?
I want to setup 4-5 boards for 4-5 rooms in my house but esp32 is x2 than esp8266. So please cann you tell me how can i get these features with esp8266 ?
Bro this was great.....
And easy to anyone to do.
So , please do the same for the 16 switch control..🙏🙏
You can easily replicate this and modify it for 16 as well
@@techiesms bro but PCB,& codes for 16 switch automation control 😀?
what does the buzzer do?
Can I control this by Google home app after integrated with Google assistant?
Its very awesome... sir can you make home automation without using external wifi.. i mean without internet ..connect nodemcu directly with mobile and use it.. no external wifi
bro i can't find the pcb in your merchandise list
Great project, thank you sir.
Sir I have one question, Although this is a great home automation project but I don't think it to be perfect since we have set the wifi credentials and ubidot token number inside the code. It would have been perfect if we can enter these credentials through android app. For wifi credentials I know we can do it by using Wifi Manager library but is there a way to enter the token through app only?
Can i use nodemcu instead of esp32
can we use blynk instead of ubidot
How many other relay can be use
i watch all videos on noded mcu with 4 channel relay and tryed it ....plz sir
Dear,
I have 4ch relay which was purchased from banggood and also nodemcu.
I would like to use it with both app and physical switch,
Can u please guide me to do so.
Thanks
Hey Bro, can you make a device which can start and restart a pc by voice command using node mcu or esp32 board. I have made one it's functional too. But coding and disign is very crude.
I want same question & some other also.
Supr brooo
Thanks man
Can we do it with node mcu
Bro its so good you can make on node-red
Pls reply Can I use nodemcu and realy module and connect them.
No you can’t
Can i use esp8266 instead of esp 32 dev board???
how we get ubidots dashbord?
Finally I find it
Now just share video and share knowledge bro
Hi, could I do this with "My biggest Home Automation project using ESP32 | IoT Projects | ESP32 Projects | Ubidots | LCSC"?
Four devices is not enough :(
I need this pcb with 16 Chanel relay (file) can you redesign for us
not possible with this buz we use feedback from switch
you can use maximum 7 channel relays in this design.
Sir please let me know instead of ubidots , can we use blynk app
Yes you can