porsche 12v lithium battery repaired
Vložit
- čas přidán 1. 10. 2022
- when the 12 volts battery runs down and after charging it does not power off. This means the control module just shut it off due to low voltage or over. If the battery fuse is intact. then next is dismantling of the battery to reprogram the module.....
You need to charge battery full before connect the board after reprogramming.
Yes. Connect it full if not the board will shut down again
🔥
hello can you explain to me the function of the wire on the lin socket?
is there a 12 volt present if I connect it to negative, should it interrupt the 200A' relay?
Do you offer this service?
Launch.