I have a titan adv. 200 stopped priming both balls are clear at inlet but nothing's coming out primer outlet I think it's clogged at primer outlet and primer knob is not one with a pin how do I remove .primer knob.
Before you try removing the prime valve, let's try something else. Lay the machine over and pour water directly into the pick up until full. On low pressure, turn the machine on. See of this helps. Find me on Facebook, it is much easier to message back about the problem
Another reason you tighten up the lower housing is to keep customers from taking it off every time to super clean it and lose parts and they come begging for lots balls and seats and cages with a worn out o ring with grooves cut in it around the metal and paint all over the place
Hello sir, I have this machine with roughly same issue, will build some pressure but won’t maintain, then pump works v hard to try and pressurise, both balls seem good and free and prime valve is good, any ideas where to look next? Thanks
I have a Sherwin Williams super nova sp. Where you can see the the rod below the piston...it leaks paint once it builds pressure. I would have to send you pictures of what im talking about. Im sure you're confused by what im saying
@Brian_the_repair_guy higher up. The rod that moves up and down, paint is coming from there and dropping back into the bucket. Below the piston but before the pick up tube. Sherwin Williams super nova sp machine. Its old school
Thank you very well done.
I hope it helped
I have a titan adv. 200 stopped priming both balls are clear at inlet but nothing's coming out primer outlet I think it's clogged at primer outlet and primer knob is not one with a pin how do I remove .primer knob.
Before you try removing the prime valve, let's try something else.
Lay the machine over and pour water directly into the pick up until full. On low pressure, turn the machine on. See of this helps. Find me on Facebook, it is much easier to message back about the problem
I put in a pump from a working machine and still lack of pressure.
@@jabbaweezy find me on Facebook I will be able to help you better
Another reason you tighten up the lower housing is to keep customers from taking it off every time to super clean it and lose parts and they come begging for lots balls and seats and cages with a worn out o ring with grooves cut in it around the metal and paint all over the place
True. Pretty common problem
Hello sir, I have this machine with roughly same issue, will build some pressure but won’t maintain, then pump works v hard to try and pressurise, both balls seem good and free and prime valve is good, any ideas where to look next? Thanks
Find me in Facebook Brian Shumack the repair guy. Same background. It will be easier to troubleshoot
I have a Sherwin Williams super nova sp. Where you can see the the rod below the piston...it leaks paint once it builds pressure. I would have to send you pictures of what im talking about. Im sure you're confused by what im saying
You are leaking paint at the piston where it goes into the fluid section?
@Brian_the_repair_guy i took off the metal pick up tube and when i did the ball came with it. The ball is in great condition
@Brian_the_repair_guy whats your email? Ill send you pictures. Im working oj it now or trying too anyhow. I live in Houston
@@bryanvance6629 so, is the paint leaking from the section where the ball is or higher up?
@Brian_the_repair_guy higher up. The rod that moves up and down, paint is coming from there and dropping back into the bucket. Below the piston but before the pick up tube. Sherwin Williams super nova sp machine. Its old school
Thanks. Just learn something new.
I am glad to help