Video není dostupné.
Omlouváme se.
How To Replace BACK UP CAMERA on 2009-2014 Hyundai GENESIS
Vložit
- čas přidán 17. 08. 2024
- How To Replace Back Up Rear View Camera on 2009-2014 Hyundai Genesis
Brand New OEM Camera (Looks like updated plastic housing to prevent rust): amzn.to/3kYYRGU
Clip PN: 87375C
Finally replacing the back up camera on my 2012 Hyundai Genesis 5.0 R-spec, how to. Leave me any questions below!
0:00 Intro
0:45 Trunk Liner Removal
2:17 Old Camera Test
3:02 Taillight Removal
8:55 Trunk Shell Removal
14:09 Rust Inspection
14:51 Old Camera Removal
16:40 Old Camera Inspection
17:25 New Camera Installation
18:14 New Camera Test
19:15 Reassembly
20:42 Outro
22:19 Bloopers
#genesisbackupcamera #howtogenesis #genesis
Add me on Instagram: @Xtalgic_
Affiliate ME
NEW GEAR:
MAIN CAMERA: amzn.to/2RLBq8N
WIDE ANGLE LENS: amzn.to/2LIQyQj
POLARIZER: amzn.to/2PaxFrA
MIC: amzn.to/2P9oWG7
FUZZY MIC THING: amzn.to/2YzSBLC
HEAVIER DUTY MINI TRIPOD: amzn.to/2P9dKcF
EXTRA BATTERIES: amzn.to/36l2GyO
MEMORY CARD:amzn.to/2LHB1A2
Other Gear:
My Bag: amzn.to/2RFOwnG
Gopro1: amzn.to/38qZALG
Gopro2: amzn.to/38rrJCd
Drone: amzn.to/2LJSdoH
Storage (I edit off of this): amzn.to/357LuwE
Storage (I store everything on this): amzn.to/2YBgwKI
My Old Gear:
MAIN CAMERA: amzn.to/2PEvxYm
WIDE ANGLE LENS: amzn.to/2P9YCMg
MIC: amzn.to/2P9oWG7
FUZZY MIC THING: amzn.to/2YzSBLC
MINI TRIPOD: amzn.to/2RF4nDe
EXTRA BATTERIES: amzn.to/36fOlnk
MEMORY CARD: amzn.to/2RErRbx
The price you pay for showing the rest of us
Worthy of much more views
I appreciate that my friend 👊
Thanks for this! much more involved than I anticipated. FYI eBay automotive has new OEM cameras for around $50.00 USD in the past I got some used parts they seemed OK except the cost of shipping. I ordered my camera from Amazon Canada the camera was $135 CDN or about $100 USD with free next day shipping. my 2009 has an electronic automotive rust protection system, seems to work on the body panels etc. I'm in Ontario we use too much salt in the winter. this is the 2nd camera replacement at 164,000 km or a little over 100,000 miles
the more you DIY, the more you learn how Hyundai save every penny in production of genesis. Anyway, good work dude! like it very much
Thanks Binbin!
This is exactly how my projects go. Thanks for showing even the pros have these days.
You got it 🤘🤘 thanks for watching!
What are the odds that mine went out yesterday, and I'm already subbed for this, thank you very much man !
Haha what timing! Not a problem and good luck 🤙🤙
Thank you for the help. Working on my Genesis R Spec is definitely a labor of love.
No worries!
great fix
👍👍
Selling mine. First I will replace the camera haha mine went black a year ago. Thanks amigo!
No worries! And good luck with your sale dude! You’ve been here since the beginning!!
Thanks you for your video. I am going to be doing this very soon on my 2010 Genesis sedan. Your experience with this back up camera replacement is very helpful. Thanks so much again for taking the time to help others. Very much appreciated.
Sincerely,
Eric Clenney
Hey man, how did the replacement go? My camera just went out too and don’t know if I should do it or take it to a professional.
Great instructional, showing the real stuff that happens and not just when things go perfectly. Mine's still working, but saving this for later. Cheers!
Thanks Daniel! Cheers buddy!
nice work
I live in TX so mine is still all good. But my trunk quit opening...other than randomly so probably a connection or relay.
Trunk liner is pretty easy to remove. I’d start there and inspect the harness?
Thanks for the how to and the laughs. I have those exact moments when it is only by shear determination to get the job done that I am able to finish.
Just finishing my fix covered the camera in plasti dip to waterproof hopefully it holds up
Had to buy two end clips at the dealer
Having trouble getting the skin back on
Now
Lining up the clips and such
Nice work!!! Great video!!
Thanks Fiona!!
Hey just to let you know that the actual part number for the clips is : Part Number: 873783M000
Supersession(s): 87378-3M000; 87378 3M000
Great job bro, thanks for sharing, I have the same shit problem looks common issue
Those bloopers are me every time I work on my car. Anyway, what a job! Glad it worked out okay. Love the Genesis. Starting to see more and more of them on the road.
I think most of us can relate 🤣
Great job been there done that
Thanks William! So you felt my pain!
Nevermind. Just watched the entire thing. Will no longer do this, ill break more things lmao
Hahahahaha omfg this comment is gold
🤣🤣
Good job. When I replaced mine, I broke the same 2 yellow clips. The same camera screw was corroded on mine, i managed to use a dremel to grind a slot and use a large slotted screwdriver to get it out. My old camera didn't have a hole in it.. Crazy!
Seems like a few of us have discovered a design flaw!!
Dang, what a pain! No issues with my camera on my BH, however I just replaced the camera in my wife's 2012 Optima. Took 10 minutes after removing truck lid liner and there is no corrosion inside the trunk lid on her MN car. Thanks for the video!
Thanks for watching and the comment friend!
Thanks, did it myself too. To take that back panel part off is a real bitch... Saved $420 on the camera (cost me $80) and my hands, very happy...
That made me laugh pretty good when you hit your head. Kinda reminds me of myself in the shop only you kept your composure much better than I would have. 🤣 Thanks for the video, mine still works but if mine goes out I will be ready for the headache. In your case literally 🤣🤣🤣
Hahahahaha
Great vid. Definitely gonna be adding some silicone around the hub of the camera.
thank you. it was a fan to watch and save me some trouble
I just got a quote from dealer for over $1500 to replace my backup camera on 2015 Hyundai Equus. I’ll will do it myself.
bro thank god you put a video for this it'll help people really bad thanks man
No worries, glad I could help!
Thanks for the video. Avoided potential mistakes. I will say all that plastic is a pain.
I love your videos man your editing is so clean
Appreciate it Aaron!
I think you replaced the alternator a little while back. Do you have any tips for that job? Keep doing Genesis tech videos! Thanks for doing them. Keith
Yes, it’s a pain in the butt so grab a friend. If you plan on flushing your coolant I’d do it at the same time so you can remove the upper radiator hose to gain way more access to the alternator. Good luck!
The same happened to me too. Like dropping a screw inside the rear lamp and having to remove the whole lamp assembly just to shake it out. Or a rusted screw where I too had to resort to my dremel to get it out just like you did. From now on I try to use galvanized screws where I can (steel÷nickel alloy). Ironically, the rust disolver gel helps convert rust to nickel too.
OMG!!! and I almost never say OMG but this is exactly the kind of thing s that happen to me so many times. I'm not wishing it on you or anyone else. Just good to know I'm not the only one!!!!!!!!!!!!!!
Thank you! Another great vid, have to replace mine now. Failed about a month ago, may just take it apart and see what's going on, I do get some sort of video occasionally.
Good luck!
Great vid ! It would be exactly how my repair would have gone as well lol
mine too has been gone for three years
A lot of water gets back there
Been meaning to do this for awhile
Might add some sealer around the camera waterproofing it
Again thanks for making Genny vids for all of us
Update :just replaced mine ,taillights came off fine thank god did have to stop by the dealer for some clips lol
Masked the replacement lens and covered it in plasti dip to waterproof it hopefully works for the long run
Thanks for watching!
Awesome video bro! Always feels like we’re in the garage with you. My favorite one is the traction control hack. Off tangent, but I been searching for your video where your buddy polishes your headlight lenses. Do you have that link?
Great video, did you inquire about maybe using a newer camera? I bought a 4.6L, but when I was checking out the Rspecs, two of them were leaking water into the trunks at the taillamps inside. I pointed that out to the sales person.
Went used, new is expensive.
Not bad for a help urself project.! Would have been a good idea to spray every nut, thread & screw with liquid grease, before reinstallation.!
I just did mine today but didn't have to replace it turn out the wire was pinched between the lining and the trunk my camera itself looked in good shape I still took it out a d cleaned it but now after taking the kink out the camera works no issues I got lucky but your video helped alot
How did you solve that Brian? Was it visibly kinked? If so, how far from connector if you don't mind? Mine is out too...2012. It slowly died. Would come on intermittently but felt it was moisture related.
How many yellow clips do you require? Thanks!
I cam see myself doing that repair and everything going about the same way. Now we need a video of how to repair the rear sunshade. Mine is stuck in the up position. Lol.
If mine every does that you will!
Xtalgic you should make a video on how to take off the intake manifold to clean the intake valves :D
Excellent repair video! Went like everything I do. I am sure the same thing happens at Genesis! Hence the cost. Nevertheless, I am going to propose to my best friend that we attempt this repair on his 2010!!!!
Thanks George and good luck!
Got it! Ordered 4
2009 Genesis... My camera is out too... Haven't tried fixing but I'm guessing automotive suction cup dent pullers would've been a better tool... Great vid though.
The Hyundai Dealership is telling me it will cost roughly 1000 dollars to replace it. How long did it take you to do this & do you think its worth paying them that much for the labor mine is 2012
Do you have to unbolt the trunk key cylinder?
Great job on the video and I just got the black screen of death and what part number are those yellow clips as I am going to just bring them and replace them? Thanks
Check the description 👍
Good work brother
Thanks man!
My 2011 4.3l genesis camera just started going black occasionally
Ya even I said ouch when u hit your head
Lol
It def hurt... may or may not have shed some blood...
Hey man! Hope all is well. Getting ready to replace my camera. Do you still have the part number for the clips? See you at the next stream...
Where did you find the clips, as I will likely get them before starting the job? Nothing worse than having to open things up again to do over if things rattle because of a missing or broken clip
How many miles you have now on the Genesis?
My heated seat doesn’t work I can’t find any videos
🤣that that music build up on taking off that back up cam
Could this be the Clip number? -
Part Number: 873783M000
Supersession(s): 87378 3M000; 87378-3M000
I typed the clip part number you gave but a different part came up.
Where can I get the yellow clips from
Haha no shit that was great timing on my part! The rusted tail bolt bought me some time to try to save you 🤣🤣🤣 Looks like the seal on your tail light isn't great and its letting water leak behind the whole housing allowing it to get in-between the trunk panels.. doesn't look like much but enough for moisture to just sit in there
Brilliant timing haha thanks!!
I don't know what year your Gennie is, but on my 2012 Gennie, all the camera wiring is routed within the channels of the outer trunk lid, so I can't get to the connector with disassembling the trunk lid. I wanted to unmate the connector, clean the contacts and remate it to see if that would cure the wavy edge to the display.
Me too. My 2012. Has the same issue. Took the inner cover to find no wires.going "old school" looking over my shoulder.
Well maybe I won’t take my 2012 apart then..
How much does the dealer charge? Snh
Need to rust proof with a oil based product. Like a Krown or Rust Check
Quality dremel use 😂🤣 cracked up at the intense force sound effect whenever you tried to force it prior to busting out the dremel 😅😝
🤣🤣🤣
Hey I was wondering if you have had any issues with gauge cluster.
My speedometer,tachometer and gas are at zero and won’t move
I have not, but maybe some has and can chime in?
Is there anyway u can turn off the running light but still have the lef stripe light stay on?
Not that I know of 🤷♂️
mines look trash can upgrade it or something
At about 12:30 I started feeling really bad for you. Been there. Always have to factor in time for trouble shooting unintended breakage
Get another Genesis🙏🏽
Do you have a part number for the clips that attach the trunk shell to the trunk?
87375C. Added to description as well.
Xtalgic Thanks will be ordering some just in case
I decided I won’t replace my camera I’ll just live with it not working
👊
Might be easier to buy a new truck lid...
If only we had the same cash flow... 🤪
@@Xtalgic hahaha
Good!
🤙🤙
I was 100% sure my camera was not bad and it was a problem with queertrons. Now I’m 100% sure I was wrong. I am about to destroy my equus to swap cameras.
Your torment in this video made me laugh. Whatch your head!
It’s too late 😜
Wow
What a pain!
Ya.. my head still hurts😆
Every time I wash my Genesis I look at the water sitting in the tall lights and say to myself that can’t be good
Must be a design flaw.. are we on to something?
I would say yes there’s definitely something wrong with the design
@@meedcorp8211 no taillight water issues on my '09.....I bought my car new January '09......69,400 miles now, not sure what issues going forward. Transmission service on the ZF6-26 isn't cheap, but it can sure take a pounding. Love the car so far, 16 road rallies in! I'll be most likely passing through the Chicago area next weekend on another rally.......
Is that a state where they use a lot of salt on roads
Yes lol. It’s pretty bad.
Thanks man. My camera just went out right after my new transmission. So yeah hahaha. My luck I swear.
booty juice?
my trunk won’t open from my keys or the switch inside my 2013 genesis anyone else have that problem?
Fuse maybe? Anybody?
yea ive been told by a few people it could be the fuse ill have to check that 👍🏽
Dealer charge is 350
mine has the issue of the radio lose power during park and only in park, I cant find out the fucking reason why...I replaced the head unit 2 times....
It’s probably not the head unity then 🤷♂️
Yeah. Imma just say eff it and use my mirrors.
🤣
I’m
Did this myself - some tips: You can and should drill a hole at the corner of the trunk lid where it meets. Put a screw driver in and you can easily dislodge the bothersome clips that you cannot otherwise get to. Marked the right spot with a pen, then center punched, then small bit then larger one for the right size hole. Worked perfect and looks OEM. Also have to work the plastic cover off the lid after you get the anchors loose. Takes a little force. Also. the plastic latch cover comes off w/o having to unbolt it from inside. Little tabs on the bottom can be reached with the trunk lid open. photos.app.goo.gl/y3AxzRb4NcrfXNDF7 (drilled holes). photos.app.goo.gl/okvSau7xUb7YWK9Z7 (clip holes)
Thanks for the tip. I am going to be replacing my back up camera soon. This guys video is great also very helpful and more like the most of us do it your selfers will encounter but it make it easier.