Makita UK SK700D/GD 360° RED/GREEN Multi-Line Laser
Vložit
- čas přidán 2. 08. 2024
- SK700DZ/GDZ are red multi line lasers powered by 12Vmax CXT Li-Ion battery. For more information please visit:
SK700D: makitauk.com/product/sk700dz
SK700GD: makitauk.com/product/sk700gdz
TRIPOD: makitauk.com/product/p-81315
LINE LASER RECEIVER SET: makitauk.com/product/le00855702
Introduction: 0:00
Angle Adjustment knob: 0:43
On / Off / Mode Selection: 1:07
Brightness Selection: 2:07
Pendulum lock: 2:25
Receiver: 3:08
SK700GD: 3:31
Mounting plate: 3:45 - Věda a technologie
Wishing everyone to be a craft master...
👍👍👍
when release 18v? i already had 18v 40v battery
That's annoying that the laser pulses when the unit is beyond the 4 deg. tilt
I would want to use this to outline a fall line (without the unit pulsing the light)
Why couldn't they just make the unit have an indicator light flash and perhaps a beep rather than flash the whole laser line light pulsing :-(
There are other units out there that keep the line on without pulsing but give an indication the unit is not level when pendulum lock mode is on.
After all, if you have engaged pendulum lock then you know you are using the unit without auto leveling, so why restrict your usage of the unit when that is engaged?
EDIT:
I may be wrong about the above but I will leave it there and remove it when/if Makita confirm
From the manual itself, it states...
"Pendulum lock - for protecting the lasers internal components the pendulum lock
will secure moving parts I place to prevent damage. This also disengages the self
leveling feature for when the laser is required for slopes such as hand rails"
Hi there, If you use the pendulum lock you can tilt the laser past 4 degrees this will mean the laser will only blink every 10 sec to remind the user that it is not in self level mode. Hope this helps you
is this laser best or milwauke 360
Will it work with 18v batteries ?i hate to have different types of batteries for every tool
Hi, this works only with 12v batteries. Unfortunately the 18v won’t be appropriate for this machine. Hope it helps
How you now the laser is straight adjusted? Thx
When is it available in Australia
Hi, you would need to ask this question to Makita Australia 🙂
Is there an 18v model available?
Hi , at the moment we have only the 12v available. Hope it helps
This is the Leica level in usa
Can this laser be calibrated?? Very important
Hi Cody, This has a dial for fine adjustment so it can be :)
@@makitauk oh wow I didn't know that if a laser has done adjustment that it means the laser can be calibrated. Thank you
마끼다 쓰지만 정말 정떨어지는 영상이구먼
디자인과 창의성이 하나도 안느껴지는데 출시까지 타사에 비해 3년은 늦엇다
이젠 정말 갈아탈때가 됐군...