Royal Enfield tappet guide removal procedure
Vložit
- čas přidán 29. 08. 2024
- Hello riders this video will show you how to use special tool while working on engine. (disclaimer- the risk of any damages to the spare or engine, belongs to you. I am not responsible to that act. Its all depends on your skill set.) Thanks.
Mostly guides and valves are not worn. It worn or scratchy if your oil was not good or tap pets are too tight. If you won't to check the voice of ticking then check out your cam. Valves and guides are not make too much noises. If you don't believe then check out without tap pets and roll it any way if they are too loose in any angle in rotational way then it's faulty and replace them both.
Sir in avl engines specially the tappit valves and cam's worn out very quickly I have talked to many mechanics who said the same thing one mechanic said that the reason of worning out is high tension valve springs and if softer springs are installed this problem is solved but I am not convinced please sir give your solution to this problem I will be personally thankful to you as I have a machismo 500lb and thunderbird 350 AVL I love my bikes and want to keep them all my life .
Chinmay sir you said the the tappit valves worn out too rapidly then what is the solution so that it last longer
Very good class. Thanks.
Thanks.
bhai abb app ney apni look change kar lee
Any way to remove the tapped valve without removing the guide?
Can I remove only the tappet without removing the sleeve/guide
Sir very nice technic, sir will you show how to extract spindle
If i get a chance then surely
Is this 350 or 500 avl and it the procedure same. Thank you for these videos
brother i have a 2015 oct classic 350 and my tappet noise is too high wad cn i do to remove it cause its making a lot of noise and service center guy is saying its normal
Sir plz guide me how to overcome the problem of tappit noise ..classic 350 3 months old 3500 km done. Plz help me
Subhash Chettiyar bro monu sagar see baat kar
Super bro special tool price
which tool please elaborate?..since used many
Good boss
Hi, I need Royal Enfield tappet guide removal tool, price plz
Hi bro, superb info video👍where should i get that tool, and what is the price.? Pls reply..🤗🤗
which tool? i use many so let me know thanks
Am sorry, that puller👍
its not available in the market. Its an OEM tool. if you want then I manufacture the tool and sell. let me know. thanks. (macasp@gmail.com)
There is any possibility of replacing the hydraulic tappet of classic 500 to an old type solid tappet?
Yes possible i an done with my electra 350
Is AVL engine performance good??
Sir, I'm having AVL Thunderbird... May I know which oil & what grade you are using... Also I have overheating problem after I changed the valves, any suggestions on this...
For motor-20W40 (2-2.25Lit) , For clutch 10W30 MA2 (420ml) and Gear Box-EP90 (500ml) is good oil for AVL.
Thank you very much 😀
Hi there..
I changed all the tappets and timing wheel..
After setting the push rod I am still having problem with the noice..
My mechanic says that he can't do anything..
Plz guide me what next..
same here tappit noise grrr hw to fixd service pe koi kch nahi karta h ..
Old standard model Cam spindle removal video link
I don't think I have posted that yet...
How can I take out the Tappet Valve, as the main purpose is to change the valve I think!
which motorcycle?
@@MechAutoClinic AVL/LB 350 thunderbird, I want to change the Tappet Vales as they cracked a bit from the top where the pushrods land on it, can I change them without opening the crankcase and just by opening the head and block? Please guide.
@@indraneil8469were you able to remove the tappet valve without removing the guide?
@@subhashs503 nope, I wasn't able to. Fixed the pushrods on the tappet valves somehow, had to open the head to access the rocker arms. The tappet valves don't hold the pushrods that well so I don't revv the engine much and so it works fine. If I revv it hard, the pushrods slip from the tappet valves and again the same process to fix them
@@indraneil8469 yes , figured out cannot take out the valve since it touches the cut slot on the case , even if I remove it somehow , it will definitely damage the guide , also impossible to insert the new valve into the guide
I want to rebuild my bullet where is your workahop?
macasp@gmail.com please send your contact number. i will call back
Sir, I am desiring a modification on that part if any have tried in order to improve the whole process so as to avoid painful replacement.thanks.
What sort of mods you are looking for?
By attaching wheel above the camgear.
I need to see on paper what's on your mind. You can send it to macasp@gmail.com. I will see the pic or drawing.
I have a AVL engine bike too. the sound is killing me. plz help me out.
please call on 9822212496
sir i have same problem like tappet noice. kindly suggest how to tighten them
+aman jb ..mine too, 8,000 km...but i add more oil, 1/4 more from a liter...and adding some additives small portion 1/4 from his original container...some clatter eliminates.. the small tappet noise re occur always at 3-4thou rpm...when the engine is running @ normal temp. now my engine oil is 3.25 liter...just testing oil capacity..and to compensate for the Philippines weather... which is hot..summer and rainy a not so cold weather...i dont wanna fix anything for my Enfield...just doing the oil first...mine is a 350 bullet standard july 2015..oh my oil no. is 20-50 special Mobil..
Sir my problem is sought out
me too
ਸਰ ਹਿੰਦੀ ਮੈਂ ਭੌਕੀਏ ਨਾ
Where can i buy special tool
You can check with RE dealership or else on sparesondemand@gmail.com.
@@MechAutoClinic do the dealerships still have these tool?