Tikka T3 Barrel Swap

A barrel replacement on Tikka T3 243 with a CBI Barrel from Solid Accuracy. I used a Viper Barrel Vise with fuel line hose to hold it in place. The action wrench was from Northland Shooter Supply.
I recommend having a gunsmith inspect all of your work. Thank you for watching
criterionbarrels.com/?v=00dc5...
www.solidaccuracy.com/product...

[@jimjones9239]

I appreciate the video, I used a Custom Action vise to hold the barrel, and the Remington 700 Action Wrench from brownells as you did. the barrel still would spin no matter what, I watched another video where they used a hydraulic press from Harbor Freight to sqeeze the vise, that combination held the barrel in place and the action came off smoothly!!

[@cpreit8862]

Tikka actions are square so you can flip your action wrench over and have it Square on both sides

[@tomx7889]

Thanks for the video. I'm about to remove my stock T3 barrel that is about 10 years old. I will be soaking it with KROIL and using a Wheeler's barrel vise. Hope all goes well.

[@mnoutdoors8812]

Best of luck on the barrel swap! Let me know how it goes. Mine was old as well and it came apart very nicely.

[@str3tchr]

Update?

[@tomx7889]

@@str3tchr was a pain in the ass but I was able to do it. Sprayed kroil every day for about a week and still struggled with wheelers vise. Used heat and a BFH. Took a few days and almost gave up.! Eventually used a handsaw to do my own relief cut. Magic!

[@storminnormangunworks4911]

Where did you purchase the barrel nut?

[@leonardogarcia2506]

What action wrench is used in the video? Thank you in advance.

[@leonardogarcia2506]

Never mind. lol I found it wheeler #2. Thank you for the video

[@fullnelson3028]

headspacing is such a pain for me