Holzmann TS200 dust collection upgrade
Vložit
- čas přidán 29. 08. 2024
- Just a simple upgrade to my tablesaw. Hopefully it can help someone.
Music: Vexaic & Event Horizon - Break Away
/ vexaic-event-horizon-b...
Camera gear:
Nikon D5600 body amzn.to/2CmNsLd
Lens 50mm amzn.to/2CRpKYx
Lens 18-70mm amzn.to/2CT9vu9
Samsung NX300 amzn.to/2lTrl7Z
Microphone: amzn.to/2Co01G2
Tripod: rover.ebay.com...
Tools:
Makita Impactdrill: rover.ebay.com...
Makita Drill: rover.ebay.com...
Makita Charger: rover.ebay.com...
Holzmann Table saw: rover.ebay.com...
Dewalt Mitre saw: rover.ebay.com...
Makita Router: amzn.to/2qpIhbA
Hole punch: rover.ebay.com...
Bosch jigsaw: rover.ebay.com...
Scheppach belt sander: rover.ebay.com...
Makita Drill hammer: rover.ebay.com...
Pocket holejig: rover.ebay.com...
Forstner bit: rover.ebay.com...
Router bit kit: rover.ebay.com...
Hi Erik, are you satisfied with your upgrade? I have the ts 250 and the mess is really bad, most of the saw dust lands on the floor. Does everything gets sucked away with your upgrade or is there a lot of saw dust collecting inside the saw? Have you sealed the front where you can adjust the angle?
+Alexander K it is better but far from optimal. I found that it works best if I use a second vacuum above the blade. I haven't sealed the anything but I guess it would be better if I did it.
Hello dude! How did u get rid of the vacum funnel thing that sourounds the blade from start? That black metal thing that the blade sits in
If I remember correctly, it was bolted with a couple of bolts. Maybe you need to remove the blade to see them. Good luck
please show the saw unit from this machine!
Hello Erik,
Can you tell me something about this saw pros/cons?
I am considering to buy this machine is it reliable?
How it works after time.. is there any problems more than dust collection issue?
Cheers :)
Hi,
I have had it almost a year and unfortunately there is more negative than positive to say about it.
- The blade that comes with it is not good, that is probably common with table saws in this price category.
- It is really hard to get both the fence and the sled adjusted. With that said, I don't have any experience with other table saws. I don't even have the sled mounted to the saw because I can't seem to get it to cut 90 degrees.
- The iron cast top is full of screw holes which can be a problem when the piece you are cutting get stuck.
On the positive side it is light weight and if you have a small workshop like me you can easily move it around. I don't regret that i bought it because it was a huge upgrade to what I had but I regret that I didn't move up a price class or two. I think you would get better quality if you spend some more. If you are a beginner/average like me this saw will do the job but investigate the options before you decide.
I've made the exact same experiences. Had to return the long rail twice as it was out of shape leading to a fence that was close to unsualbel. Newer got the sledge to work, impossible to align properly even if I drilled all holes up. Look at the top, uneven chamfers aso. I revoved the side table and all rails and expanded the table w ply and my homemade fence. Motor too weak at 1100W, Don't buy - build your own or buy a better - Bosch GTS 10 XC and modify it. I consider throwing it out. Won't even sell it
Claus Friis Hansen i can buy it :)