That's one "smooth" move with the serious hammer and the sharp cornered! I'm stealing that one for sure! Thanks again for letting us look over your shoulder!
Thanks James... I wish I could take credit for thinking of that bit of video editing magic but I cannot. I saw it elsewhere and figured out how to make it work. It takes some extra planning and editing work to make it happen so I don't do it often but it's cool you noticed and took the time to comment... much appreciated! Best, Matt... and Chip!😁😎
@@jbonegw FYI I stole the idea from Jay Bates because I thought it was so cool the first time I saw him do it and knew I had to figure out how... Best, Matt
For some reason, this blew my mind haha. When I was a kid I spent a summer with my dad trying to remake rails for our deck, I remember the notch issue. If only had youtube back in those days!!! Thanks.
Learned something new, using the wood block to add in breaking out the cut off scrap, very nice trick, much cleaner then just busting them out with a hammer.
Thanks, Tom... you snagged the nugget from the video... hope you find it as useful in practice as I do. Its greatest weakness shows when the wood is knotty or has cantankerous grain because the break-out isn't nearly as clean... but then that's an issue when 'busting them out with a hammer' too. As I'm sure you've reasoned more cuts is the best remedy for difficult wood... and you can get some spectacular flying chips with dry, straight-grained wood like these old posts so stand clear of the chips (safety glasses or even a face shield can be prudent) and let 'em fly!
Glad to hear of your sensible work practices; your story is a valuable reminder for any and all... one slip in a million and you'll have a painful reminder for the rest of your days...
When I see a video like this, I ask myself why I've been doing it the hard way for so many years. It just proves that you're never too old to learn new tricks, even for old dogs like me.
Thanks for all the tips and tricks. I'm building my pergola today and that was the video I needed to see. Esp the 2 pre cuts to make the job go easier and cleaner.
It’s so awesome watching master craftsman doing their job so easily, while in reality they have been doing it for 30/40 years. I’m a manual machinist myself and truly enjoy watching videos like yours. Thank you for sharing
Hey Rob L it sounds like I share a similar Fascination when watching machinist videos on Clickspring on CZcams... you know when you're watching a pro when they make it look so easy, right?! Best, Matt
Watched a couple of your videos this morning. Excellent stuff! Subscribed! I've been trawling iTunes carpentry videos for a couple of years now, and you have a great and informative, no nonsense approach! On par with Peter Sellers and John Tried. Thanks for sharing😊
Hi Cheroxx, A friend helped me find some very old neglected comments hiding out on Next Level Carpentry... so a belated 'thank you' for your subscription... hope you're still watching videos here? Best, Matt
I was a painter for 25 years. Then I started doing carpentry work and have been for about seven years. You sir are an artist. Thanks for the videos. I’ve subscribed.
BRU, you can put on a LOT of paint in 25 years so I understand switching to carpentry. Does it make you smile now when you do little carpentry things that make the painter mad?! :-) I don't mind ribbing a painter now and then just to keep them on their game! Thanks for your comment AND subscription!! Best, Matt
I have was a builder until I retired in 1990. I never saw anyone use your idea of using a piece of wood with a square edge to remove the cut pieces. That really saves time and work.
John, Congratulations on a good career... and a LONG retirement! The block is a fun and useful method and your assessment of it tells me you've had enough experience in your day to really appreciate a good idea when you see one. My challenge is to try to remember those good ideas when I need 'em :-(
After 15 years in the trades and then 20 more years teaching these skills in a big high school in Texas, I'm glad I found your channel to keep my interests peaked. Liked and subscribed!
I'm glad you found Next Level Carpentry too hotrods27... welcome! Thanks too for watching and commenting here... viewers with your experience add a level of 'authority' to content and I appreciate it. Reaching the age demographic of your students is of interest to me so if you could request a single video topic that you'd most like to see as a 'teaching aid' for you big high school students what would it be? Never know what I might be able to put together for you/them... Best, Matt
@@NextLevelCarpentry Thanks Matt. The one area of instruction that I found to be a constant, no matter what the project, is proper use of layout tools, especially the ruler. Since the geniuses running education decided kids don't need to learn the ruler it's important to show these students how the ruler can help them do the math, especially adding and dividing fractions. Tape measure, folding ruler, speed sq, combination sq, framing square fundamentals. When, where and why. Thanks again, I'm interested to see what you come up with. Danny
@@hotrods27 Thanks Danny... I'll keep that in mind. Seems like great content for short fill-in videos. I've recently actually been contemplating a video to use a framing square to show where the angles on a speed square come from... You're welcome for sure... stay tuned for more! Best, Matt
Just completed a deck floor at our cabin and was getting ready to tackle the rail post the next day. This video came up. Great idea on how to notch deck post. This will save me a lot of time and it should be a cleaner finish for sure. Thanks .
Glad to hear it Dave... best thing about this method is that it's pretty portable which should make it easier to use at a 'cabin' where conditions and tools might be less than ideal? Best, Matt
Cognitor, thanks for the sub... and from halfway around the world? Cool! I sincerely try to keep frippery out of my technique although a bit of it usually gets through the editing process
You're sure welcome Ryan... thanks for commenting.... and have fun post notching. The part where all the little chunks break off at the same time is pretty cool IMHO! Best, Matt
I just love learning new woodworking tricks. I cannot find a video on the kitchenette I plan to build but videos like this are very encouraging to figure it out.
If you search the next level carpentry channel here on CZcams you will find videos about Edge banding laminate work and professional grade cabinet doors among other things that might be helpful for your kitchenette project. 😁😎 Best, Matt
Thanks Kyle, it's good to know the message it getting out... I sometimes wonder what this stuff looks like to new eyes and your comment is affirmation...
Thank you! It's good to know you're learning a few things here... I hope it helps you tackle challenging projects and get satisfaction from the results. I have a long list of video topics but sadly the recording/editing/production/upload process is SO much harder for me than the actual work my publishing rate is slow.
Thanks for checking out so many Next Level Carpentry vids! Let me know if there's anything special you are interested in learning that I might know... Kind Regards from very near the geographical center of the USA :-)
Was looking for ways to notch some 4x4 posts on my deck, extremely well done video. I wish I could lay the posts down, but this video will be a huge help making some repairs to my exist deck.
Since only the one or two cuts that define a notch have to be located accurately you might be able to fashion a collar of sorts to act as a guide for those two critical cuts on your standing posts. Even simply clamping a block on to guide a cut would be a big help... Best, Matt
Graham, Thanks for watching and commenting... I'm glad to hear my approach appears 'unflustered' because plenty of fluster-causing moments arise in the video recording/production process. My efforts to maintain humility are strongly bolstered by the steady stream of very accurate mistakes that seem to crop up on an all-too-frequent basis :-)
Glad you enjoyed it that bit of video Magic... thanks for the subscription Mackenzie Reds! BTW You'll be able to catch my sidekick Chip in the next video upload at Next Level carpentry this weekend... Best, Matt
Vlad C, Thanks for the reassuring comment... I gathered the seeds of these ideas from mentors over the years and try to honor them by paying it forward: "If I have seen further, it is by standing on the shoulders of giants" Isaac Newton
Denny, Thanks for commenting... it IS really cool to see how clean the pieces come out... I suggest you give this method a try even if only on an old scrap post because it's actually quite fun IMHO
Yet again I learn something very useful from you. Thank you so much. I have never seen that method used to get the cut pieces off so fast! That is really something to remember for sure. I enjoy your videos very much. I go through them everyday and watch a couple of them. Keep these great videos coming because I know I will reach the "Next Level" by learning from you and your videos.
mc4, So glad to hear it! I hope to continue to supply helpful info to any and all who enjoy new challenges and adding to their skillset... stay tuned for more :-)
I've this method before except for the shallow cuts on the face end to use a slamming block. The way the scrap pieces 'domino'd' out was cool. I'll (hopefully) remember to do that the next time. I do cut a shallow end about 3/8", but only to avoid splintering as well as having a level base to start with the chisel cleaning out the kerfed pieces.
Thank you for the instruction. I have subscribed. At 01:15 you mention "very accurate cut" then proceed to free hand the saw. That's good work. I would definitely need to set up a saw guide.
Hey Tim, Thanks for the sub... and sorry about that 'contradiction' at 01:15. I wasn't trying to show off, it's just second nature to follow a sharp, straight line on a 'carpentry' project without using a mechanical guide. It would have served viewers better if I'd guided the saw with a speed square in my left hand to demonstrate how well that works. On a 'millwork' project I would definitely use a guide set up of some sort with the speed square trick at the bottom end of a list of choices since a more 'very accurate cut' is required for finish grade work. I do hope that you're successful in using this method when you find occasion to give it a try!
Many thanks, Matt... Your technique worked great on my 6x6 treated posts - um, especially since you did all the cutting for me. 😉👍 I'll have no problems chipping and chiseling out the waste. When it's finished, my project will look professionally done.
Hey M, Thanks for watching and commenting! There's nothing like getting tangible results from a CZcams tutorial to solidify the knowledge gained, is there? A great motivator for me in teaching/sharing 'tricks-o-the-trade' like this is watching how viewers like yourself absorb and apply lessons learned to get results that look 'professionally done'! Some professions loftier than carpentry use the mantra "see one, do one, teach one" which seems to apply here, in concept at least. Regards, Matt
Robert, You'll like the tip even more when 'next time' arrives and you give it a try. I'm sure you caught it but having a sharp, square corner on the block makes a difference, especially on shallower notches. Have fun!
Harold, You're certainly welcome... it's good to know you found this interesting and informative! A quick browse of your channel subscriptions tells me I'm in great company which is another compliment. Best Regards, Matt
If you PT posts are soggy with treatment chemical and/or knotty you may have to adapt a bit but this method should work well for you... work safely and have fun!
Thanks for your comment, Simon... glad you liked that part. Truth be told I 'stole' the split screen trick used in this video (and a few other Next Level Carpentry videos) from a video I watched on Jay Bates' CZcams channel. I had a similar reaction as yours and determined to figure it out and implement it. If I understand, Jay took some video production courses in college and is pretty good at it. I should do more of it because essentially it cuts video production length by 50% by accomplishing the explaining and the doing simultaneously. Unfortunately the time it takes to plan it and set it up complicates the time and effort to build a video in the first place. Best, Matt
@MKMW C Interesting... figures that a video production pro came up with it... takes some non-linear thinking to originate such cool stuff for the rest of us to work with.
Thanks for letting me know, Daniel, I really appreciate it! More to come, but a little slow in the video production department with pressure from work on my 'day job' 😁
I have found that a 2" surface planing router bit with 1/2" shank (bottom cleaning ) does a nice clean job...a little bit at a time....and use a rail jig for the router to sit on. Love ur cordless choices 😋
Your method might have superior results in the shop building fine furniture. On a job site, you need to cut a notch in a post as quick as possible with as few a tools from your truck as possible. Every carpenter or framer has a circular saw, a hammer and a chisel.
It's a real kick to watch those chunks go a-flying Kevin... but be sure to do something to protect your face/eyes when you do. Have fun with your build... and in case it applies, here's another video I did while building the same pergola: czcams.com/video/0TI7AV8HdXI/video.html Best, Matt
@@NextLevelCarpentry Thank you sir. That elliptical stick is brilliant and the rafter end template you built will be a time saver as I am going to be shaping quite a few 2x8 rafters and a few 2x10 headers. I've added your tools list and can't wait to add the magnetic tack hammer to my collection. That thing is awesome.
Paul, Thanks... we have a mutually beneficial arrangement even though I've always thought he got dealt a better hand in the looks and intelligence departments
Excellent work, great video and instruction. And a fantastic idea - wish I'd thought of it or seen this before (badly) notching some wood for a pergola.
Al, Thank you for an encouraging comment! Wish you'd found this earlier too... it's a great method for so many applications. Hope it comes to mind for your NEXT project!
Waouw ur goood
Thnx
Waouw = WOW? Love it!! LOL 🤣
That's one "smooth" move with the serious hammer and the sharp cornered! I'm stealing that one for sure! Thanks again for letting us look over your shoulder!
Kids and adults deserve a teacher like you. Fantastic work.
OK, that part where you drop yourself into the video, to explain the work your doing, genius! Absolutely genius! 🤙🏽
Thanks James... I wish I could take credit for thinking of that bit of video editing magic but I cannot. I saw it elsewhere and figured out how to make it work. It takes some extra planning and editing work to make it happen so I don't do it often but it's cool you noticed and took the time to comment... much appreciated! Best, Matt... and Chip!😁😎
was it my impression or when you clean the dust with the compressor or that part you just move to the side as if you were dodging the dust ? 05:35 =)
James Pakele check out Jay Bates channel he’s a master at replicating himself in videos. 😂
@@NextLevelCarpentry what program did you use to edit with ?
subscribed though :)
@@jbonegw FYI I stole the idea from Jay Bates because I thought it was so cool the first time I saw him do it and knew I had to figure out how... Best, Matt
For some reason, this blew my mind haha. When I was a kid I spent a summer with my dad trying to remake rails for our deck, I remember the notch issue. If only had youtube back in those days!!! Thanks.
True expertise here. This info will never be old.
Learned something new, using the wood block to add in breaking out the cut off scrap, very nice trick, much cleaner then just busting them out with a hammer.
Thanks, Tom... you snagged the nugget from the video... hope you find it as useful in practice as I do. Its greatest weakness shows when the wood is knotty or has cantankerous grain because the break-out isn't nearly as clean... but then that's an issue when 'busting them out with a hammer' too. As I'm sure you've reasoned more cuts is the best remedy for difficult wood... and you can get some spectacular flying chips with dry, straight-grained wood like these old posts so stand clear of the chips (safety glasses or even a face shield can be prudent) and let 'em fly!
I always use proper safety equipment, past 60 and still have both eyes, most of my hearing and all 10 fingers. ;-)
Glad to hear of your sensible work practices; your story is a valuable reminder for any and all... one slip in a million and you'll have a painful reminder for the rest of your days...
Tom Truesdale pughyuuiiouuiuuhtuhjgaqanoqu
The very definition of "Work smarter, not harder" 👏
When I see a video like this, I ask myself why I've been doing it the hard way for so many years. It just proves that you're never too old to learn new tricks, even for old dogs like me.
Lee, glad you found this enlightening... woof, woof (old dog learning new tricks?
This is the perfect method for my deck project. I cannot wait to get started. Thank you!
Awesome tip! I will put this in my bag of wood working skills and hope that I can recall when needed. Thanks.
Thanks for all the tips and tricks. I'm building my pergola today and that was the video I needed to see. Esp the 2 pre cuts to make the job go easier and cleaner.
Carl Zajac You’re never to old to learn. Thank you
Wow! What a great tip! Whacking the block in a few fell swoops is a huge improvement. Great Tip!
Truly a great pleasure to watch a master artisan at work!
A true craftsman.......I've been building my entire life of 63 years.
It’s so awesome watching master craftsman doing their job so easily, while in reality they have been doing it for 30/40 years.
I’m a manual machinist myself and truly enjoy watching videos like yours.
Thank you for sharing
Hey Rob L it sounds like I share a similar Fascination when watching machinist videos on Clickspring on CZcams... you know when you're watching a pro when they make it look so easy, right?! Best, Matt
I really liked this tip, now I'm going to look on our home page for more on doing a full mortise and tenon for large timber joints.
There is always something to learn! Thanks for sharing coach!
You’re so darn skilled, it makes it look easier-Thanks very much.
The best part was at 3:40. I also like how you are explaining the steps while your twin is showing us how it's done at 5:08
Another excellent video, Matt........thanks for sharing your experience.
You have mad skills sir. Great job!
If you say so,Paradox :-) Thanks!! Best, Matt
Watched a couple of your videos this morning. Excellent stuff! Subscribed! I've been trawling iTunes carpentry videos for a couple of years now, and you have a great and informative, no nonsense approach! On par with Peter Sellers and John Tried. Thanks for sharing😊
Hi Cheroxx, A friend helped me find some very old neglected comments hiding out on Next Level Carpentry... so a belated 'thank you' for your subscription... hope you're still watching videos here? Best, Matt
I was a painter for 25 years. Then I started doing carpentry work and have been for about seven years. You sir are an artist. Thanks for the videos. I’ve subscribed.
BRU, you can put on a LOT of paint in 25 years so I understand switching to carpentry. Does it make you smile now when you do little carpentry things that make the painter mad?! :-) I don't mind ribbing a painter now and then just to keep them on their game! Thanks for your comment AND subscription!! Best, Matt
Next Level Carpentry . Lol double nail.
I have was a builder until I retired in 1990. I never saw anyone use your idea of using a piece of wood with a square edge to remove the cut pieces. That really saves time and work.
John, Congratulations on a good career... and a LONG retirement! The block is a fun and useful method and your assessment of it tells me you've had enough experience in your day to really appreciate a good idea when you see one. My challenge is to try to remember those good ideas when I need 'em :-(
Great video. I'm making some posts for porch steps and this video will help me for sure. Thanks for taking the time to make it!
Paul B, You're welcome... let us know how it works out for you? Good luck with your project... work safe and enjoy!
Several useful tips. Thankyou
After 15 years in the trades and then 20 more years teaching these skills in a big high school in Texas, I'm glad I found your channel to keep my interests peaked. Liked and subscribed!
I'm glad you found Next Level Carpentry too hotrods27... welcome! Thanks too for watching and commenting here... viewers with your experience add a level of 'authority' to content and I appreciate it. Reaching the age demographic of your students is of interest to me so if you could request a single video topic that you'd most like to see as a 'teaching aid' for you big high school students what would it be? Never know what I might be able to put together for you/them... Best, Matt
@@NextLevelCarpentry Thanks Matt. The one area of instruction that I found to be a constant, no matter what the project, is proper use of layout tools, especially the ruler. Since the geniuses running education decided kids don't need to learn the ruler it's important to show these students how the ruler can help them do the math, especially adding and dividing fractions.
Tape measure, folding ruler, speed sq, combination sq, framing square fundamentals. When, where and why.
Thanks again, I'm interested to see what you come up with.
Danny
@@hotrods27 Thanks Danny... I'll keep that in mind. Seems like great content for short fill-in videos. I've recently actually been contemplating a video to use a framing square to show where the angles on a speed square come from...
You're welcome for sure... stay tuned for more!
Best, Matt
Just completed a deck floor at our cabin and was getting ready to tackle the rail post the next day. This video came up. Great idea on how to notch deck post. This will save me a lot of time and it
should be a cleaner finish for sure. Thanks .
Glad to hear it Dave... best thing about this method is that it's pretty portable which should make it easier to use at a 'cabin' where conditions and tools might be less than ideal? Best, Matt
Great style with no nonsense, no frippery technique.... great editing too! Got a new sub! Thanks & greetings from the SW corner of Australia...
Cognitor, thanks for the sub... and from halfway around the world? Cool! I sincerely try to keep frippery out of my technique although a bit of it usually gets through the editing process
Fantastic video. Thank you for sharing your expertise on making a clean notch. I'll be using this technique for a pergola myself!
You're sure welcome Ryan... thanks for commenting.... and have fun post notching. The part where all the little chunks break off at the same time is pretty cool IMHO! Best, Matt
I just love learning new woodworking tricks.
I cannot find a video on the kitchenette I plan to build but videos like this are very encouraging to figure it out.
If you search the next level carpentry channel here on CZcams you will find videos about Edge banding laminate work and professional grade cabinet doors among other things that might be helpful for your kitchenette project. 😁😎
Best, Matt
@@NextLevelCarpentry Thank you. I have something a little bit different in mind but will still be watching all the videos I can.
Great instructional video. Thank you!!
Really enjoy the way you have "the other guy" standing explaining what you are doing...really 'Next Level' stuff right there.
It's a bit of extra trouble but is kinda fun on occasion😁😎 Best, Matt
Anything that you do, is teaching me. Thanks
Perfect!!! Just wanted I needed!!! Thank you 🙏🏾
That wood and hammer trick is awesome! Can't wait to try it!
You'll find it's even more fun to do than to watch Aaron... have fun! Best, Matt
Great tutorial, thank you very much. Merry Christmas.
You're welcome Derek... and Merry Christmas to you and yours as well. Best, Matt
Your videos are very educational. I really enjoy your efforts to teach and pass on your skills and knowledge.
Thanks Kyle, it's good to know the message it getting out... I sometimes wonder what this stuff looks like to new eyes and your comment is affirmation...
This was super helpful, thank you!
I'm notching in the morning on a custom pergola. Great tips to 'up my game'. Thanks @ Next Level!
You be notchin' like a pro there Brett... good luck with your pergola project! Best, Matt
Another great video, I always learn something new on every one I watch, thanks for posting
Thank you! It's good to know you're learning a few things here... I hope it helps you tackle challenging projects and get satisfaction from the results. I have a long list of video topics but sadly the recording/editing/production/upload process is SO much harder for me than the actual work my publishing rate is slow.
I'm never too old or too proud to learn, keep up the good work, all the best from the UK
Thanks for checking out so many Next Level Carpentry vids! Let me know if there's anything special you are interested in learning that I might know...
Kind Regards from very near the geographical center of the USA :-)
Was looking for ways to notch some 4x4 posts on my deck, extremely well done video. I wish I could lay the posts down, but this video will be a huge help making some repairs to my exist deck.
Since only the one or two cuts that define a notch have to be located accurately you might be able to fashion a collar of sorts to act as a guide for those two critical cuts on your standing posts. Even simply clamping a block on to guide a cut would be a big help... Best, Matt
I like your unflustered approach to teaching, you seem a very humble guy..thanks
Graham, Thanks for watching and commenting... I'm glad to hear my approach appears 'unflustered' because plenty of fluster-causing moments arise in the video recording/production process. My efforts to maintain humility are strongly bolstered by the steady stream of very accurate mistakes that seem to crop up on an all-too-frequent basis :-)
Once I saw you explaining, with you in the background working I knew you were the real deal. Subscribed!
Glad you enjoyed it that bit of video Magic... thanks for the subscription Mackenzie Reds!
BTW You'll be able to catch my sidekick Chip in the next video upload at Next Level carpentry this weekend... Best, Matt
You make it look so easy! Thanks for sharing.
billeybop, You're welcome... I think you'll find it IS so easy once you get a little practice...
It's a trick I really need. Thank you so much.
really good videography man. thanks.
Thank god for people like you who show your skill to help others. Thumbs up.
Vlad C,
Thanks for the reassuring comment... I gathered the seeds of these ideas from mentors over the years and try to honor them by paying it forward:
"If I have seen further, it is by standing on the shoulders of giants" Isaac Newton
He’s real Boss..I’m going to the job site right now and I watch this video to make sure I remembered thanks thanks for posting up
Go for a big, deep notch in a clean dry post... you'll never forget it after that! 😀😎 Best, Matt
I do like the way you teach!
Great work, great tips and very professional. Thanks for your videos.
Michael,
It's fun sharing these things with folks like you who appreciate it... and take the time to comment!
Regards,
Matt
That was really cool how the pieces came out so clean!
Denny,
Thanks for commenting... it IS really cool to see how clean the pieces come out... I suggest you give this method a try even if only on an old scrap post because it's actually quite fun IMHO
Yet again I learn something very useful from you. Thank you so much. I have never seen that method used to get the cut pieces off so fast! That is really something to remember for sure. I enjoy your videos very much. I go through them everyday and watch a couple of them. Keep these great videos coming because I know I will reach the "Next Level" by learning from you and your videos.
mc4,
So glad to hear it! I hope to continue to supply helpful info to any and all who enjoy new challenges and adding to their skillset... stay tuned for more :-)
Those twins are great at carpentry.
Alistair,
Thanks... They went to all the same schools and, when they get along, actually seem to get some stuff done around the shop :-)
The quiet one does all the work though. 😁
I've this method before except for the shallow cuts on the face end to use a slamming block. The way the scrap pieces 'domino'd' out was cool. I'll (hopefully) remember to do that the next time. I do cut a shallow end about 3/8", but only to avoid splintering as well as having a level base to start with the chisel cleaning out the kerfed pieces.
Nice work. I like the two of you working together
Thanks BakerOne,
Now if I could only get 'that other guy' to work a little harder and faster I'd have it made, right?
Thank you for the instruction. I have subscribed.
At 01:15 you mention "very accurate cut" then proceed to free hand the saw. That's good work. I would definitely need to set up a saw guide.
Hey Tim, Thanks for the sub... and sorry about that 'contradiction' at 01:15.
I wasn't trying to show off, it's just second nature to follow a sharp, straight line on a 'carpentry' project without using a mechanical guide. It would have served viewers better if I'd guided the saw with a speed square in my left hand to demonstrate how well that works. On a 'millwork' project I would definitely use a guide set up of some sort with the speed square trick at the bottom end of a list of choices since a more 'very accurate cut' is required for finish grade work. I do hope that you're successful in using this method when you find occasion to give it a try!
Outstanding production!
Thanks! Bext, Matt
Great instructional and video quality! Thank you.
Thanks, Rex... for the nice compliment and for taking the time to comment!
Many thanks, Matt... Your technique worked great on my 6x6 treated posts - um, especially since you did all the cutting for me. 😉👍 I'll have no problems chipping and chiseling out the waste. When it's finished, my project will look professionally done.
Hey M,
Thanks for watching and commenting!
There's nothing like getting tangible results from a CZcams tutorial to solidify the knowledge gained, is there? A great motivator for me in teaching/sharing 'tricks-o-the-trade' like this is watching how viewers like yourself absorb and apply lessons learned to get results that look 'professionally done'! Some professions loftier than carpentry use the mantra "see one, do one, teach one" which seems to apply here, in concept at least.
Regards,
Matt
Using the block and large hammer to remove the material, I had not seen before. Good tip, I will be sure to use next time. Thanks!
Robert, You'll like the tip even more when 'next time' arrives and you give it a try. I'm sure you caught it but having a sharp, square corner on the block makes a difference, especially on shallower notches. Have fun!
great work on the wood and the videos!, I have just subscribed! keep up the good work!
Thanks Mikey... for the comment AND the sub!
That’s a pretty slick trick! I like that!
WOW! That trick with the wood & large hammer is awesome, been using the hammer for years.. Thanks..
Wow amazing editing skills and wood work as well!
THANK YOU for all the instructional videos you create. I have learned so much, nice clear concise instructions.
Youbetcha, Fred... thanks for watching and commenting here! Best, Matt
Great video! Interesting, informative and great presentation. Thanks!
Harold,
You're certainly welcome... it's good to know you found this interesting and informative! A quick browse of your channel subscriptions tells me I'm in great company which is another compliment.
Best Regards,
Matt
That hammer and piece of scrap trick is legit! thanks
Legit as it gets :-) You're welcome, Austin!
I'm just getting ready to make a pergola with 6" PT posts. These tips will help a lot. Thanks.
If you PT posts are soggy with treatment chemical and/or knotty you may have to adapt a bit but this method should work well for you... work safely and have fun!
I find all your videos helpful!
Glad to hear it Daniel... Thanks for watching and commenting! Best, Matt
Thanks for sharing your skills - sensei!!
You're welcome Kelly! Thanks for the compliment... Best, Matt
Excellent tips
Thank you, great advice!
excellent tip, i'm just about to do this
Great tips! Thanks!
GREAT Video. Nice and consice but informational with cool tips and tricks
Thanks Jesse... hope it helps you out somewhere along the way. Best, Matt
The way you had the split screen where you were giving the running commentary of yourself was well done, I'd never seen that done before, great idea.
Thanks for your comment, Simon... glad you liked that part. Truth be told I 'stole' the split screen trick used in this video (and a few other Next Level Carpentry videos) from a video I watched on Jay Bates' CZcams channel. I had a similar reaction as yours and determined to figure it out and implement it. If I understand, Jay took some video production courses in college and is pretty good at it.
I should do more of it because essentially it cuts video production length by 50% by accomplishing the explaining and the doing simultaneously. Unfortunately the time it takes to plan it and set it up complicates the time and effort to build a video in the first place. Best, Matt
@MKMW C Interesting... figures that a video production pro came up with it... takes some non-linear thinking to originate such cool stuff for the rest of us to work with.
Great woodworking skills illustrated here....I am subscribed
Thanks for commenting and your subscription... Best, Matt
Love your channel!!
Thanks for letting me know, Daniel, I really appreciate it! More to come, but a little slow in the video production department with pressure from work on my 'day job' 😁
Funny I just got done doing the very same thing about 5 minutes ago for a mail box post. Still fun to watch you in high speed. Lol
Great job, great video!
You’re never to old to learn Keep watching and listening
Nice trick with the wood block, never saw that one before. It is also a good way to relocate a workbench. It was rocking... :)
Don't rock the bench, Baby! 😂😂😎Best, Matt
Great video, thanks for sharing it.
Matt Oliver from one Matt to another: you're certainly welcome😎 hope you find other Next Level carpentry videos helpful as well...
Nice video, thanks for sharing your expertise.
You're welcome, ygg!
I have found that a 2" surface planing router bit with 1/2" shank (bottom cleaning ) does a nice clean job...a little bit at a time....and use a rail jig for the router to sit on.
Love ur cordless choices 😋
Your method might have superior results in the shop building fine furniture. On a job site, you need to cut a notch in a post as quick as possible with as few a tools from your truck as possible. Every carpenter or framer has a circular saw, a hammer and a chisel.
Just a plain very very good instruction !!!
Thank you sincerely, Robert! Sounds like you found this at a 'teachable moment' so I hope you're able to put it to good use when the occasion arises!
One of the best post notching videos I've seen. I'm going to be doing your stock and hammer removal method on posts for a pergola I'm building.
It's a real kick to watch those chunks go a-flying Kevin... but be sure to do something to protect your face/eyes when you do. Have fun with your build... and in case it applies, here's another video I did while building the same pergola: czcams.com/video/0TI7AV8HdXI/video.html Best, Matt
@@NextLevelCarpentry Thank you sir. That elliptical stick is brilliant and the rafter end template you built will be a time saver as I am going to be shaping quite a few 2x8 rafters and a few 2x10 headers. I've added your tools list and can't wait to add the magnetic tack hammer to my collection. That thing is awesome.
@@kevkev5935 Timing is everything😁😎 sounds like you're well on your way to success! Best, Matt
I love that style of video,, nice how you had yourself in two places at the same time.....
Thx Jeremy... it's a little bit of video editing Magic which is fun to do so I always appreciate it when somebody notices and comments😎
Great work, that's something I can use!
Glad to hear it, Michael, thanks for commenting! Best, Matt
You and your brother do great work
Paul, Thanks... we have a mutually beneficial arrangement even though I've always thought he got dealt a better hand in the looks and intelligence departments
Great editing and wood working skills.
Thanks Brion... I really try! 😁😎 Best, Matt
Nice! Some good tips as always Matt. 😊
Ron
Thanks Ron! Best, Matt
Good job. Come in handy when I get enough money to build my new deck.
Awesome video
Excellent work, great video and instruction. And a fantastic idea - wish I'd thought of it or seen this before (badly) notching some wood for a pergola.
Al,
Thank you for an encouraging comment!
Wish you'd found this earlier too... it's a great method for so many applications. Hope it comes to mind for your NEXT project!
Excellent, very informative.
Thanks Darius!
Bloody Hell!!!!!
How many times have i seen and done that BUT never like this!!!! Mind Blown!
very useful! Thanks a lot