How To Fix a Non-Spinning Maytag Washer: Lid Lock, Agitator & Tub Hub Replacement
Vložit
- čas přidán 29. 07. 2023
- Welcome to my journey of fixing a Maytag washing machine that wouldn't spin. This step-by-step video guide walks you through the entire process of diagnosing and repairing the spin problem. I delve into the intricacies of replacing the lid lock, wrangling with a stubborn agitator, and finally, replacing the tub hub - even despite a defective part from Whirlpool. I hope this video empowers you to tackle your own Maytag washing machine problems and serves as a useful reference for your DIY appliance repair needs.
In this video, you'll learn about:
Identifying the issue with your Maytag washing machine
Tools and techniques for handling a stuck agitator
The process of replacing the lid lock and tub hub
Dealing with defective replacement parts
Tips and tricks for ensuring a successful DIY repair
Please leave your comments, like the video if you find it helpful, and don't forget to subscribe for more DIY repair videos.
As an Amazon Associate I earn from qualifying purchases.
W10324651 Washer Drive Block For Inner Tub fit for Whirlpool: amzn.to/43TvDix
Buy me a coffee:
www.paypal.com/donate/?hosted...
Send me something:
Harper & Knowles
2945 Highway 1153
Oakdale, LA 71463
My Gear
My Vlog Camera: amzn.to/43vbRv3
My Backup Camera:amzn.to/3UGIz8H
My Studio Camera: amzn.to/417DV5Y
My Wireless Camera Controller: amzn.to/3L4MhWg
My Preferred Memory Card For Cameras: amzn.to/41xIHtc
My Portable Charger: amzn.to/41dtTAc
My Studio Microphone: amzn.to/41fcrLO
My Lavalier Microphone: amzn.to/3UC8Tkn
My Studio Teleprompter: amzn.to/3KJikts
My iPhone Gimbal: amzn.to/3GMLd76
My iPhone Chest Mount: amzn.to/3zZUZ1I
My Main Studio Light: amzn.to/3mvBV8N
My Secondary Studio Light: amzn.to/3GM2v45
My External Hard Drive: amzn.to/3GMLDKI
My Publications
My pen name is Cal Kasheau. Hey, I'd like to shamelessly promote my literary accomplishments while I have your attention. I have several short story titles you can get on Amazon; the links are below. Some are humorous, some reflect events in my life, and some are legends I heard of as a child in the swamps of Louisiana. They are only a dollar or two, and most are free with Kindle unlimited membership. I hope you will take the time to read one or two and give me your honest opinion in the comments on whether or not I should continue to pursue a side gig as an author.
The Legend of the Loup Garou: A Louisiana Horror Story
amzn.to/3EJE4o2
The Legend of the Parlangua: A Louisiana Swamp Tale
amzn.to/3VtF3ys
The Fuzz vs, The Buzz: A Backwoods Beekeeper Meets a Traffic Cop
amzn.to/3EEvwP7
The Story of Buster the Cat: How I survived the Ride From Hell
amzn.to/3T5BM6L
Tell a Story ,Teach a Lesson
amzn.to/3CUd2I3
The Dreaded BMI Index: How it Was that I Went on a Diet
amzn.to/3T5W53Y
My Misadventures as a Moonshiner
amzn.to/3CAmBLT
The Magic Blanket
amzn.to/3yGE8AS
All the Girls I've Loved: A series of stories about a young man's life and the women he loved
amzn.to/3esvIXb
Thanks for watching!
#MaytagWasherRepair #DIYApplianceFix #WashingMachineTroubleshooting - Jak na to + styl
I pick up these washers and dryer setting by curbside for throw a way. Have done this for
about 1 year. I am 84 years old. So far, I have been able to repair all. Then I give them away
.This is my way to help someone in need especially single moms or someone needy. This
becomes a blessing for us both. I deliver and set up all at no cost. Keeps me active and helping
others in need. GOD has blessed me. Praise GOD in the highest !
That is a wonderful mission. I hope my videos help in your repairs. Thanks for watching!
Thank you sir for the answer
No problem
After troubleshooting and thinking it was the transmission I saw this video, thank you! It was my tub hub
Glad it helped! Thanks for watching!
Very helpful an informative, thank you
Thank you for watching!
@@HarperandKnowlesThis machine is so very clean(spot rust).
so far the Speedqueen washer I have has been trouble free in the 5 years ive had it.. hopefully it keeps on truckin
It should be good for another 20 years or so. Thanks for watching!
@@HarperandKnowlesHands down, the only vid worth watching. Question on My "wash-plate" Kenmore; Intermittent drive motor. Normal cycle or test mode: might work or not. Old cap metered good/new cap-still no change. Possible bad relay on Motherboard? What say You. Help is appreciated, Thanks so much.
Just noticed Ur Louisiana Guy w/books. Sounds interesting to Me.
Got the same washer. Making a nose while the tub is washing. But noticed the tub does not spin while rinsing. Any help would be appreciated.
The tub hub is probably your problem. Thanks for watching!
I thought it was the clutch. Changed it but housed the lid lock. To see its motion. Agitates well. But when draining the tub wants to spin but dont move.
I have a Maytag bravos. It was occasionally making a grinding sound when starting to agitate. Then it just recently stopped spinning. I removed the wash basket to check the drive hub which was indeed bad but my problem is, when I removed the wash basket, the tube that it’s connected to came out with it and now I’m stuck and don’t know what to do. I tried just putting it back together like that but it’s not working.
If your spline shaft is broken you'll have to change the gear box. Thanks for watching!
Hi why my agitator is turning with the basquet
Probably because your splutch isn't shifting completely. Thanks for watching!
hey i have a maytag like the 1 you have in this video. it stops when it gets to the final rinse cycle and the spin light blinks off and on. the clothes still have some water in them. any ideas? thanks
I would say your tub hub is stripped out. Thanks for watching.
I have an older Maytag and it spins but it doesn’t spin fast enough to get the water out of the clothes…they are still wet and it only spins for a couple of minutes and then spins again…any ideas? Thanks for any help
You may need a new motor. If it spins then stops then comes back on after the motor has a chance to cool down then your motor is failing. Thanks for watching!
Wow, at 36:22 you skipped the video forward. That is the exact point of the cycle where my machine fails to go into spin cycle. My agitator turns a few turns left then right, Unbalancing the load. Then tries to spin, causing the machine to violently jump all over the laundry room and eventually go to "complete cycle" never going into high speed spin. The load is completely soaked. My Diag codes are F7 E7, I think it is a Splutch cam problem. Thanks for the video
You are very welcome. Thanks for watching!
awesome repair!!! do you ever get any of those OLD! whirlpools? i wish I could find one.. like from the 60s and 70s?
No, those are considered antiques now. I get a few from the late 80’s and 90’s though. Mostly worn completely out!
@@HarperandKnowles that system from the 80s always seemed wierd.. somewhat simple but even more clunky than the "wigwag" design...
@@HarperandKnowles Have a question for you..I used a the dryer yesterday and worked just fine..using it today and the drum keeps spinning without the dryer being on..I have to keep the door open..would you know what would cause that?
You failed to mention the make and model but I’ll give you my best guess. So if it stops when the door is open but starts right up when you close it I’d think the start button is stuck down. Just guessing but if you open the timer you might discover some stuck points if the start button isn’t the problem. On a GE product, (includes Frigidaire) I’d suspect a stuck start button too. Also be sure your door switch is working properly. If it continues to run but the timer doesn’t move then it’s the timer motor or something preventing power to the little motor. Thanks for watching!
@@HarperandKnowles Samsung. There's no model number sticker on it. 2014 design
Have a amana washer i bought feb last year BRAND NEW. Have had to repair 3 times. So frustrating and exhausting 😢
I’m sorry to hear you’re have trouble with your washer. You should get a Speed Queen TC5 they are the best! The Best Washing Machine You Can Buy In 2023 czcams.com/video/qlkdxWfTZVw/video.html
Grinding sound in spin mode. Not spinning. Actuator replaced. Program recalibrated.
A grinding noise during spin is never a good sign. It’s almost always a symptom of failing bearings. Depending on your model it could be a failed tub hub. But most likely your bearings are failing. Look for evidence of rusty water spots on the bottom near the center. Failed bearings usually mean the machine has ended its useful life. Models like the Cabrio with a direct drive rotar/stator system can be repaired. See this video. Whirlpool Cabrio Spin Noise & Rusty Spots Under The Machine Solution Guide
czcams.com/video/_RxnUScT40I/video.html. Thanks for watching!
Do people ever remove the blue plastic protection on their washer/dryer control panel? Whenever I come across laundry repair channels or random laundry videos, I've noticed a lot of end users don't remove the blue film on their machines after years of use🤣😆.
I buy a lot of used machines and that stuff sticks down almost permanently after a few years. It’s hard to remove but once I paint the frame and peel that stuff away it looks like a new machine! Thanks for watching!
I didnt know that those metal couplers fit those types of machines. I been ordering and using the plastic ones. I hate the plastic ones
Yeah, I quit ordering the plastic ones too. Even if you change one it doesn't last more than a month or so and the customer gets mad at you.
@HarperandKnowles yep. I had that issue a few time.
@HarperandKnowles I have to lg washers that I can figure out. One spins and agitates. But the agitation is very delayed and the wash cycle doesn't count down. The other one won't spin. I changed the locks stators and actuators. And they don't have hull sensors. Any idea what I'm missing
Probably the control boards on both. If they have the same control boards why don’t you swap boards on one and see if the issue transfers over with the board. Then you’ll have your answer! Let me know how that goes.
@HarperandKnowles control boards are different. And I have 3 more control board but there all different. I should of save the wire harness