This ONE simple mod can transform the Traxxas TRX-6? (suspension mod)
Vložit
- čas přidán 15. 08. 2022
- The Traxxas TRX-6 is a top tier RC crawler in whatever form you run it, but there's always room for improvement. With this one simple suspension mod we are hoping we can transform that top tier rc crawler and make the TRX-6 a god tier crawler!
Enjoyed this video? SUBSCRIBE ➔ czcams.com/users/RCunexttuesd...
SUPPORT OUR CHANNEL AND CHECK OUT OUR SOCIALS ➔ linktr.ee/RCunexttuesday
SECOND CHANNEL ➔ / @rcunexttime9563
RCunexttuesday, but if not, RCunexttime - Zábava
Cool mod. I'm stealing that idea. Not even ashamed of it!
Expected nothing less of you
@@RCunexttuesday it turns out that it's a bit trickier to implement on a 4wd. Got to think smart on this one. Maybe I'll leave it 😂
Only if you plan on keeping it scale😉
I'm a mod, and I know I should know better....... BUT
That's fucking brilliant! That is the dogs danglies guys. Definitely gives the rear some weight bias when hanging, coming down hill. Uphill climb can only be improved by having your tyre on the ground. What a mod 👍
haha, we'll let you off😂
It seems more stable entering a descent and exiting a climb. Looking at refining it but we're well impressed with how its worked this far. Theoretically could benefit having the middle wheels function in the same way, may give it a test, IDK
@@RCunexttuesday oh you know your doing the middle track as well.
It should take the wheel away from the rear set, stop them touching.
Try bushings I heard you say bearings bushing are cost effective for the job it's doing.
And that naughty word was well placed and used for good effect.
We're thinking about turning the key around, would lie the shock down slightly and allow it to pivot away from the middle wheel. Good shout, once we figure out what the plan is we'll look at bushings to smoothen the motion🤟🏼
Now THAT, is flippin brilliant ! My mate got one of these recently, I will send him a link to your vid.
Sent it!
Thanks Leg End, we're looking at refining it now!
Cantilever system idea is off the rails!!!! Billy's idea is proof even a blind squirrel finds a nut once in awhile!😂 Just amazing! Always a pleasure an thanks for the info! "Well done Lads" Right On 💪
I'll take that mate😂👍
I have a trx6 g63 with 120mm shocks, long arm kit widened on 12mm hex. Installed the keys on both rear axles (flipped for more travel and stock location return). Flex is freaking unreal at 8 1/2"😊
There are issues with rear driveshaft seperation and torque twist... working these issues out though. May be less an issue with stock shocks. Unstoppable on the rocks. Thanks for the inspiration guys❤
That’s awesome. I need to try this. Great job!
Give it a go bro✌️
That’s madd mate.
✌️
hello! hey i did something similar on my hauler. Just found your video, you beat me to it by a long way.
But i limit the axle droop with a chain , which means no binding. Same side to side rock, but less down travel as a pair.
Nice work guys!!! hreat looking rig btw 👍🍺🇬🇧
A chain is a good idea.
Update on those? Any improvements or did you abandon it all together?
I love the idea.
Flex blades on 1/24th scale rigs are pretty, but can hurt you descending. You’ve got to have a limit strap.
There’s got to be a reason a set isn’t commercially available. And it’s probably because they don’t work well without crazy amounts of tuning.
Thanks
Still running them, actually looking at installing them on the middle axle. We've seen solid pivots linking the rear two axles but they're unnecessarily expensive and these keys are the most practical and similar method of achieving the same results
Cool mod and great crawling
Thanks dude!
@@RCunexttuesday 😁👍
I think this just proves who is the technical brains of this operation 🤣
Undoubtedly 😉👍
Have you guys considered that mod on both rear axles? I bet the middle would be trickier to mod but if both rear axles had that mod I bet it would be insane! Well done guys!
We have toyed with the idea, like you said it would be a lot trickier to do, I think we'd go a different direction with it if we attempted to mod the middle axle. Possibility, that's for sure!
Can you do tbat on the middle axle?
We have in our more recent videos!
Did you Velcro has body mount or a other technique?
Looks interesting but would be nice watch the same spots with a stock or locked lever to watch the difference in the performance.But i will try your trick on my Reely Free Men 6x6 maybe it works better than my stock suspension.
If you check out our other videos you'll be able to see just that✌️
It’s a good idea. I’m doing it for the middle though. I’m having trouble with the rear shaft over extending. How could fix that issue
That's an interesting issue. We were thinking of adding the mod to the middle axle too, might take a bit of fabrication/modification...
How do you mean over extending?
@@RCunexttuesday since the rear drive shaft can only be a certain length when fitting it in. If there’s too much droop the drive shaft will over extend and come apart. So I had to abandon it cause I couldn’t fix that issue.
What wheels and tires are those?
Run of the mill ali rims with gmade tyres, not sure on part numbers sorry my guy
That's killer. Lots of pros to that mod. Have you found any cons at all? Using bearings or bushings for the levers? Any binding or twist at the lever when a tire gets jammed? Very sweet guys👍
It's not the smoothest but it does the job. As far as cons go that would be it👍
AWSOME GUYS !! LOOOVVVE IIIIT !!
👊🏼
@@RCunexttuesday i love true peopme making just true vdo :) not like all those "beautiful amazing etc " channels :)
I copied your mod. Works perfectly. Tweeked it a little, doesn't hangup. Thank you.
Awesome to hear dude, how did you do it?
What and where did u get this part? I saw something that was 3d printed but I passed by it and can't find it now
You can get a 3d printed version for both rear axles, pretty expensive and not easy to find. Get a shock key set. Cheap as chips and easy to install, we've only got it on the rear set but have debated with more!
That’s an old little trick used to get more flex out of the MN models 😎
We had them on the Capra too, a decent little upgrade but when used on something like this... game changed...
@@RCunexttuesday can definitely see the advantage’s of having it on the back of the 6 💪
Quite clever, that. 🤔
Why thank you🤓
Hello this is Chloe aka The Boss I can’t wait to see you at Paddlesworth you better have a teddy ready for the jump contest oh and just so you know elmo and Mike wazowski are doing great there also exited to see you after a full year. 🧸
Hey Chloe! Glad to hear you're looking after them still😅 see you the weekend👍
or can just increase the spring tension on the middle axle? which also decreases turning circle W with it free moving like that you are losing traction from rear axle in normal driving ,just moving it forward to middle axle.Did same as yours on the mn landrover. needs another shock on other end of the key be a proper cantilever system.
Everything is a trade off. We're looking to improve flex and the number of wheels on the ground at any one time, it's a truck that's expected to have a large turning circle anyway. Long vehicles always are
@@RCunexttuesday but when it is just dangling down , there is no pressure on it as the top of the shock is free floating?
Only entering into a decline, the weight sits at the front of the truck. On an incline the weight sits at the back of the truck. If you watch when it's working you can see lugs gripping, it's not a perfect system but it undoubtedly improves upon having the wheel floating as with the stock suspension
@@RCunexttuesday adding dampers to the other end of the swivels would help
Great video and that crawling spot is great !
Link to key? Or size
As far as I'm aware they're all generic. A eBay search of 1/10 shock key should bring up tbe best options specific to you
@@RCunexttuesday I found them, thanks!
Can you make a quick video on how to, I keep running into issues
Keep on the lookout for our shorts, well upload one soon!
@@RCunexttuesday thanks!
Well aint Billy a clever boy and Jay u need a hair cut bro lol 💯💪👊🤙
I have my moments 😂👍
@@RCunexttuesday lol its always nice to have home made mods that r free 😉💯💪👊🤙