HOW TO: Fiat 500 Oil Change // COMPLETE Tutorial!
Vložit
- čas přidán 16. 07. 2024
- A full step-by-step tutorial on doing an oil change on a 2015 Fiat 500. This process should apply to all 500 models with some minor differences.
IMPORTANT NOTE: In this video, I show using a wobble extension in order to reach the oil filter. This is not the best way to do it. There is a gap between the bumper that allows you to fit a straight long socket directly through and to then undo the filter housing. This is safer as it would prevent the potential for stripping out the plastic on the filter housing. Doing it the way that is show in the video will work, but you need to be extra careful.
Tools Needed:
10mm, 13mm, & 27mm sockets
Ratchet (3/8 & 1/2)
Torque Wrench (20 ft-lbs on filter housing and drain plug)
New Oil Filter
4 Qts 5w-30 Oil
Various extensions and wobbles
Products Used In Video:
Oil Filter: amzn.to/3xNoK8h
27mm Socket for Fiat: amzn.to/4aQ2CZp
Tools Used:
Mini Bit Driver: amzn.to/3WeGZNX
Torx Set (Includes T40): amzn.to/3Wge50c
Torx Socket Set: amzn.to/3U5Zq4U
Favorite Impact Socket Set: amzn.to/44ezfNY
Favorite Deep Impact Socket Set: amzn.to/44fKfe7
Good Torque Wrench: amzn.to/4aJKqRg
Solid Ratchet: amzn.to/3WbvwyM
Extendable Ratchet: amzn.to/3W8HN7b
0:00 Draining The Oil
3:00 Oil Filter Removal
4:12 Replacing Oil Filter
6:20 Refilling The Oil
8:49 Resetting Oil Light - Sport
There’s a hole to feed the extension through so that you can get straight to the oil filter cover.
You're right - I didn't learn about this till after I made the video! Thanks for sharing though, hope the rest was helpful!
New to European cars, Fiat 500, 2012. You might warn that it would be a good idea to use a 6 point socket. On mine the oil filter is easier to access if the plastic cover is removed. Good video, thanks.
They are charging crazy for an oil change right now. I decided to learn how to do it myself so thank you for this video really helped a lot!
Glad it helped! Overpriced service is what convinced me to learn how to work on cars in the first place!
Truly Thank you for this video.
As a Fiat owner I feel like everyone should know how to change the oil because apparently it's next to a possible for anyone to actually change it
It is a real shame how hard it is to get Fiat service anywhere in America.
Pep boys did it for us! Just letting anyone know if they’re looking for a place
It’s just physically difficult. If you don’t have some relatively unconventional tools (wobbles, extensions, etc), you need to either buy them or get someone else to do it forever.
Just a note to help people out who change their own oil. What works really good for draining your oil into, is a couple used laundry detergent bottles. It's handy, and convenient when you have to take your used oil to be recycled.
Great tip!
thx. after all these years I finally figured out how to stop messing with those dirty oil drain pans. And I'm an automotive technician. loL@@speedygarage264
Thank you my friend excellent tutorial
Thank you for your upload 🎉
Well done mate. I changed the oil and filter on my 2011 Abarth…once. I now pay my mechanic to do it😅 My previous Suzuki Swift Sport was so easy!!
Haha yeah this is one of the more involved ones. How do you like the Abarth? I really considered buying one instead of my Fiesta ST when I was in the market.
@@speedygarage264 surprisingly pretty good, I really like it. So much in fact I bought another, a 2017 Tourismo “hotted up” that my wife drives. Also, an excellent car.
Never did it before, and service is getting harder and harder to find for the FIAT (the dodgeramfiat dealer is losing interest in FIAT customers here). Thanks for the info on ramps versus jacks.
Yes - I've noticed that too about the dealers! Unfortunate for sure.
Wow, that absolutely blows. Fiats are increasingly becoming an extreme niche enthusiast cars for the daring as even mechanics are turning their backs on them.
Little quirky but not bad similar to my Pontiac solstice. At least the oil drain plug is facing down for easy draining when it’s on the ramp
Glad the oil filter is reachable from on top of the car
Thanks man!
Happy to help!
Nice, thanks. Had no idea that thing was the filter. I'm used to longitudinal engines so this thing is all sideways on me lol
The oil level shows lower on the ramps because you hadn't started the engine yet. After you started it and backed it off thr ramps some of the oil fills the filter housing and is held in the filter medium. This probably why you don’t see it happen when you prefilled filters on other cars.
Tip for the oil getting all over the cross member just cut a bottles bottom off and a hole bit enough for drain and a magnet above it and slip in on (this is the only reason i can think of that NO ONE will get this cars oil changed)
Great idea! I'll have to try that next time.
Thanks, was wondering if I had to take pan cover off to get to drain plug is what brought me here. Going to try not to, have wide oil for mess. Neck is fused together at C1 & 2 from broken spine, can't be under car long. I love my long 2 piece Eastwood ramps never move, wide, strong & come apart for side access.Always save money, to buy more toys! Good job I can take it from there. Thanks again !
Glad it helped!
@@speedygarage264 Check out the Eastwood ramps, great product. Subscribed
Thank you for the video! Do you have a link for the replacement plug?
It's just as likely that it was running the engine while taking it off the ramps filled the filter and filter housing that brought the oil level down.
I there, great video 👍🏻 do you know if the fiat 500 automatic need a gear box oil change ??
“Good for the life of the car” is what they’ll tell you. But change it every 80-100k miles if you care about the “life” of the car.
Trouble getting it up? I think they have pills for that
Thank you very much for doing this video. Is full synthetic better than a blend?
Definitely better to go full synthetic!
It uses 4 quarts
5w-40 and 4 qts. per manual.
😃
Thanks 👍👍👍
@@Vladimir-Poopin , Uh mine calls for 5W40 on the oil filler cap & the owners manual.
Not my year.
dude... great video. But... re-record that you shows how to needle extension through little hole between light and metal support. Do you have a Transmission service video ?
You're right - I probably should re-record since I didn't know about the extension trick. I'll do it next time I do the oil service.
I'll get a transmission one done soon since the car also needs it!
😂😂 pay the extra 5 just to put Kirkland oil in it im dead 😂😂
Thought Fiat 500 uses 5w40 ideally although it can also use 5w30, but 5w40 is recommended
Why don’t you mention the engine in title oder description?? I don’t get it..
The steps and the tools you need differ between the engines used for the fiat 500
I am in the United States and only 1 engine was ever offered - but you're right, I could have mentioned that information.
@@speedygarage264 aah alright, i didn’t know that 🙃 in Europe we have about 5 different Pretrol und 1 Diesel Engine for the fiat 500.
The Position and the type of filters and screws differ in those
Brother, there’s a hole on the top of the bumper so you can directly reach the filter housing with a long extension without the use of Wobblies. Wobbly slips on that plastic housing and strips it, you’ll need a new one. If you’re gonna do something, especially making a video about how to do something, do it 100% right.
Thank you for pointing this out, I will add a note in the description.
Give him a break...
@@JOESMITH-bx8qvfor real lol. This is such a great informative guide that's very accessible to the average person. A small thing like that doesn't warrant such a comment smh
“Don’t like getting it too close to full” you won’t overfill it like that.
Just add what the oil capacity is supposed to be and you won’t have issues.
If your low just top it off with water.
@@snakeplisken2123if you add water make sure to add a bit of detergent too help it mix
Get an oil extractor and save yourself from all this unnecessary work.
Yes, this is unfortunately one of the more involved oil changes...