As always great video, it's a bonus when you've got good neighbours that allow you to trample across their borders, great to give something back to your folks.
Thanks so much mate💪 the neighbors round this area are brilliant. hence why I wanted to tooth in for he, rather than a unsightly straight joint... although it would have been quicker. Least I can do for them mate 👌
Thanks so much mate! Yea alot more time and effort is going into them over the last few months, especially now I'm back to it🤜🤛 yea mint saw bud! Hope you and the fam are all well mate
Hahaha tell me about it mate 😂 should get a medal after this 😂 ...daft thing is....my mom bloody loves it, always pottering about doing something in her garden 😂
Cheers mate for the support, glad you enjoyed the video 🤜🤛 I got called out for saying 4 bricks was 900 in the last video by everyone 😂🤫 i can't get it right 😂 Hope your well mate 💪
Toothing looks so much better. I took the neighbors opinion into consideration as her house is set back, so she'll see the extension very clearly from her house. Wanted to make sure she was happy 🤜🤛
@@IzzytheBricky I understand the fact that the neighbour will see the extension . Did she bring up the subject first or was it something that was mentioned by yourself? If she has requested this through her own knowledge then fair play. Love the uploads Izzy , informative and very interesting
Hi I very much enjoy your videos You seem a decent honest chap I'm a flagger and I'm looking into buying a laser level What do you have there I borrow my mates level Sometimes but I don't like to borrow tools so I'm looking in to buying one
Cheers brother! I still prefer the 13" as it just has a nicer feel to it. However in the last few days I've been using that small one, just to give me a break from Something heavy all day 😂💪
Hi mate, make sure to tighten the screw that holds the water tap on!!! I've got the same saw, lost the screw and the orange tap within the first 2 days.
😂😂😂I lost it too mate and then found it in the mud after 30 mins of searching 😂🤫 Fantastic saw though, defo my new favourite toy Hope your well mate and cheers for the comment
@@IzzytheBricky mate my saw burnt out this afternoon and had to go hire a stilly to get some cutting done before tomorrow. Good saw while it works, but disappointing it's not lasted very long. It's getting returned for a refund.
@@rossmcdonald5202 ayup mate! Bloody heck, that's well disappointing mate! That's odd that's it's burnt out like that..I'm still thrashing mine and not treating it well at all and not had any hiccups yet. Get hold of their customers support buddy 💪💪 hope your doing well despite this cold weather mate 💪
@@IzzytheBricky I'm doing well cheers pal hope you are too! think a heavily meshed reinforced slab might have been a bit much to ask unfortunately. Great for cutting blocks though. Amazon did a product recall so I'm sending it back to them for refund, then I'll probably buy another from evolution as it comes with 3yr warranty 👍🏻
Tidy as always Izzy. On the new build sites in my area building control would have 2 pillars and a ton of hold down straps. I don't know what they think is gonna happen to these garages - fly away?
😂😂😂😂 they are mad for pillars ain't they on the new build garages 😂 never know mate, could be a windy winter 😂 I'll let you know if it's still standing in a few weeks
Are you left handed too? Or was the video just inverted? Great skill if you can use both hands to that level of quality, fair play. Like Ronnie O’Sullivan on the trowel 😂
Hi mate, I got it from Evolution. use the link in the description mate. And if your use code "BRICKY" at checkout, you'll save yourself 5% I was well impressed with it mate, been using it none stop today doing 7n concrete splits 💪
Thank you so much! I can't lie, these are probably some of my favourite bricks to lay, shows off workmanship quite nicely. Appreciate the support Pat 🤜🤛
Hi mate. Yes we are able to do a control joint in this area. I think it comes down to personal preference and what the inspector is happy with. I've had no issues raised using toothing in or control joints 💪
@@IzzytheBricky right on! I figured it'd be something like that 🤣 I had to ask though! Thanks for the work you put into your videos too btw you have me super tempted to get into an apprenticeship.
😂😂 I know, but gotta keep everyone happy, especially as it's facing her house 👌 I prefer to tooth work in anyway, makes for a much better job in my opinion. hope your keeping well buddy
Hi mate...I'm currently sat and the sofa editing the next video now before heading to the gym at 7:30. I'm very impatient as a person, so when I start something I like to get it finished ASAP. I like to use my time wisely, when I have lunch/if I have lunch at work, I'll start cutting up videos and that so make it easier on later for me. Video usually take between 3-4 hours EACH to edit..sometimes more (if I get distracted) The gym is strictly in and out, 45 50 mins max😂 I use to spend most of my spare time watching my other favourite CZcamsrs (Steve and Alex, Charlie so on) and TV but now I just work on my own stuff till about 9:30, eat, TV bed..maybe attempt to clean the house, but I think I'll just get a cleaner 😂 the weekends if I'm not working...no phone, no IG or CZcams, it's me time with my mates or partner ...and Monday comes back round to do it all again. Hence why I had the month break buddy. Had alot of things going on in real life, so CZcams took a back seat, as it eats up my time😂
Set out wrong didn’t you 😅 you came 890mm starting with a full brick but if your toothing out you should’ve started with a header? Easy mistake, great work though been watching you for a while very good work lad! 👏
Hahaha I spotted that when editing! I corrected it when setting out, but couldn't be bothered to go back and redo the clip 😂 keen eye! Happy to know you've been watching a while 💪
@@robertnapier4455 never done a footings with that shallow of footings. Definitely wouldn't pass around here. Maybe for a small wall..5 course high max
Thanks to Evelution for sending out this awesome disc cutter 💪 aspireiq.go2cloud.org/aff_c?offer_id=6845&aff_id=27155
Great to see a youngster enjoying his trade. Well done Izzy and co.
Cheers brother appreciate it 🤜🤛
Must say izzy you have a wonderful ability to teach your fantastic skills luv it.👍👏
Thanks so much Bob, really appreciate it🤜🤛
That’s gonna be a lovely sized garage . Your dads a lucky man that you can sort that for him 👍 top job
Yes mate gonna be about 10m long😂😂 least I can do for the family mate ☺️
You are a real credit to the new generation of bricklayers. I bet your dad is really proud.👊👊👊👊👊
Thanks very much Karl, it means a lot 💪 haha Im sure he is mate ☺️
love your enthusiasm , 40 years in I have lost it
Thanks so much Scott! Very happy to see your still here watching the videos! Think you were one of my first subscriber's ☺️🤜🤛
Yes mate that saw is a beauty indeed !🤙🏾🤙🏾.
I like how you build traditional mate , nice full perps every time 🧱👍🏽
Y'know it mate, always trying with the full perps 😘 and yea was so impressed with it mate 💪
As always great video, it's a bonus when you've got good neighbours that allow you to trample across their borders, great to give something back to your folks.
Thanks so much mate💪 the neighbors round this area are brilliant. hence why I wanted to tooth in for he, rather than a unsightly straight joint... although it would have been quicker.
Least I can do for them mate 👌
Videos getting better and better each time mate, keep it up!! Also the saw looks mint😮
Thanks so much mate! Yea alot more time and effort is going into them over the last few months, especially now I'm back to it🤜🤛 yea mint saw bud! Hope you and the fam are all well mate
Another top video. You are one of the best brickies on CZcams. Keep it up my man 👍
Thanks so much Chris! Hope your well and enjoying your week so far🤜🤛
Good thing about the wet cutting facility is the dust is limited I guess compared to dry cutting! Like cutting through butter!
That’s , a nice , bit of brickwork and it ,works really well with,,, the toothing , 😊
Cheers Gary! Hopefully once it's weathered a bit more it will be a good match!
Best wishes
Love your work Izzy, like watching a chef icing a cake 😁👌👌👏👏👏❤️
Hahaha thanks mate👨🍳
Awesome video Izzy good on you champ helping Family, it’s safer that way Hahaha awesome brickwork as usual for you , I love the saw. Cheers 👍
Thanks so much James, appreciate it! Glad you enjoyed the video! Hope your having a great Christmas
Mental how you can be so fast and still do everything to such a good standard, brilliant mate 👌
Thanks Jordan! I thought we had a really slow day to be fair with you 😂 appreciate the support mate
@@IzzytheBricky if that's slow I don't want to see a fast day 🤣 smashed it 👌
Roof tiles look really good. Another great video. Thank you
Cheers Pete! Glad to see your enjoying the videos still 🤜🤛🍻
Excellent video mate. Nice and simply explained.
I bought the smaller Evolution saw a few months ago without the water. Great piece of kit 👍🏻
Glad you enjoyed it mate! Yeah there a brilliant bit of kit! Been using it all day again today 💪💪 hope your well
Another mint job izzy and drew 👍 buzz off your vids boys 2 top grafters 💯
Love the way you can lay bricks left and right handed
Cheers mate really appreciate it🤜🤛 happy to hear your enjoying the videos mate, working an another one now, should be good to go on Sunday again 💪💪
Fantastic quality Izzy.
Mint job and high standard bud 👌
Thanks so much Steve appreciate it! Was a great build
Awesome stuff, wish I could move a couple of counties north and learn from you!
Haha cheers mate! I'll just keep putting out videos for ya! Save you from moving up here 😂☺️🤜🤛
tip when laying blocks flat. Keep straight joint for 2 course, same as laying side by side and lay both in one pass.
Thanks mate! Didn't know that! Great tip
Lovely work! It looks so easy when you do it.
Cheers buddy
Lads love it as always. Lovely stuff
Cheers Ashley 🤜🤜💪
You make it look so easy, it's crazy. Fantastic job, and really good finishing on that roof too 👊
Thanks very much mate! Just practice mate. Auto pilot takes over when I setout and lay nowerdays 😂🤜🤛
Great episode, guys. What an amazing saw 👏🏻👏🏻
Cheers mate! And yes bud, a mint bit of kit 💪💪
Lovely old job......top bricky
Cheers Andy, appreciate it mate💪
That saw is certainly the dogs innit.👍 Getting fed again from Mum 😋
Always well fed on this job! Drew bloody loves it here😂 ah yea, fantastic saw mate
So not only a free extension but also a free garage , Izzy you are a top son to your parents mate . I take it they don’t like gardening 🤣🤣🤣💪🏻💪🏻💪🏻
Hahaha tell me about it mate 😂 should get a medal after this 😂 ...daft thing is....my mom bloody loves it, always pottering about doing something in her garden 😂
Great vids…just discovered your channel….recognised the accent!!! I’m just over the border in Trowell…..keep up the good work!!!
Thanks mate, glad you found us! Haha not far at all mate 💪 cheers, will do! Enjoy your weekend
Another good video brickwork is 890 but you need the extra 10mm perp measure out 900 and you don't need to tighten up 👍
Cheers mate for the support, glad you enjoyed the video 🤜🤛 I got called out for saying 4 bricks was 900 in the last video by everyone 😂🤫 i can't get it right 😂 Hope your well mate 💪
They are not proper bricklayers trust me 9 x table your never go wrong 👍
Totally agree 4 bricks is 900
Yes I’m always doing 900 or 1800 then if bricks are bigger or smaller change it 5mm above or below and will usually sort the run out
The dis cutter the new wife 😂😂😂😂
Aswome video bro
Keep safe bro
😂😂😂 I'll but tucking it in at night mate 😂 cheers for the support Billy🤜🤛
@@IzzytheBricky 😂😂 np mate happy to watch a good man at work 😎
If it was my extension, I too would want toothing joints, but wtf has it got to do with the neighbours ??
Toothing looks so much better. I took the neighbors opinion into consideration as her house is set back, so she'll see the extension very clearly from her house. Wanted to make sure she was happy 🤜🤛
@@IzzytheBricky I understand the fact that the neighbour will see the extension . Did she bring up the subject first or was it something that was mentioned by yourself?
If she has requested this through her own knowledge then fair play. Love the uploads Izzy , informative and very interesting
Top work, top people, i thought Drew was leaving haha
Cheers Logan mate! Na he's back for good🤜🤛
Enjoyed that. New sub here
Thanks so much mate! I've JUST uploaded the next part to this video!! ☺️☺️
Wicked bricky dude keep up the good work
Thanks mate
Hi I very much enjoy your videos You seem a decent honest chap I'm a flagger and I'm looking into buying a laser level What do you have there I borrow my mates level Sometimes but I don't like to borrow tools so I'm looking in to buying one
Excelente trabajo 🧱💪👏👌🏻
Thanks mate!!🤜🤛👍
Quality vid, seen you switching different size trowels, can you give an update what you prefer still with these?
Looking forward to the next one 🤘🏼
Cheers brother! I still prefer the 13" as it just has a nicer feel to it. However in the last few days I've been using that small one, just to give me a break from Something heavy all day 😂💪
Great vid mate 👍 keep grinding
Cheers bro! Hope Ur good mate!
Hi mate, make sure to tighten the screw that holds the water tap on!!! I've got the same saw, lost the screw and the orange tap within the first 2 days.
😂😂😂I lost it too mate and then found it in the mud after 30 mins of searching 😂🤫 Fantastic saw though, defo my new favourite toy
Hope your well mate and cheers for the comment
@@IzzytheBricky mate my saw burnt out this afternoon and had to go hire a stilly to get some cutting done before tomorrow. Good saw while it works, but disappointing it's not lasted very long. It's getting returned for a refund.
@@rossmcdonald5202 ayup mate! Bloody heck, that's well disappointing mate! That's odd that's it's burnt out like that..I'm still thrashing mine and not treating it well at all and not had any hiccups yet. Get hold of their customers support buddy 💪💪 hope your doing well despite this cold weather mate 💪
@@IzzytheBricky I'm doing well cheers pal hope you are too! think a heavily meshed reinforced slab might have been a bit much to ask unfortunately. Great for cutting blocks though. Amazon did a product recall so I'm sending it back to them for refund, then I'll probably buy another from evolution as it comes with 3yr warranty 👍🏻
@@rossmcdonald5202 haha yea maybe so 😂 it's good you can send it back for a refund though bro! Cheers mate and enjoy your weekend, almost there 💪
You are a great builder but again the DPC. Start using epdm or lintle slabs what we use in the Netherlands
Thanks so much! I'll look into it. Not even sure if we can get that here in the uk
Saw looks good mate, I've got the earlier version waiting for it to pack up so I can get that one but it won't 😁
Cheers Andy, yea my first time using one and I was so impressed mate! Awesome bit of kit! Hope your well mate
Izzy, what Mortar Mix are you using?
Tidy as always Izzy. On the new build sites in my area building control would have 2 pillars and a ton of hold down straps. I don't know what they think is gonna happen to these garages - fly away?
😂😂😂😂 they are mad for pillars ain't they on the new build garages 😂 never know mate, could be a windy winter 😂 I'll let you know if it's still standing in a few weeks
Are you left handed too? Or was the video just inverted? Great skill if you can use both hands to that level of quality, fair play. Like Ronnie O’Sullivan on the trowel 😂
Cheers mate! It's a trick of the camera 🤫🤫🤫 can't do anything with my left hand 😂
Hey buddy where'd you get that saw from that thing looks like it could really cut good
Hi mate, I got it from Evolution. use the link in the description mate. And if your use code "BRICKY" at checkout, you'll save yourself 5%
I was well impressed with it mate, been using it none stop today doing 7n concrete splits 💪
@@IzzytheBricky hell yeah you think that code applies here in the states
I understand how you get the line square from pulling it from the house, but how do you get it level to lay to?
Hi mate. You take the level from the garage and just transfer that to what your building ☺️
@@IzzytheBricky so you just run the line level with the existing brickwork? How are you fixing the line at the garage end?:)
@@craigashby1782 yes pretty much so mate. Using a pin to hammer into the existing Brickwork ☺️
Your a very tidy brick layer. No smudges st all
Thank you so much! I can't lie, these are probably some of my favourite bricks to lay, shows off workmanship quite nicely. Appreciate the support Pat 🤜🤛
Didn't fancy matching the bricks then
Can you get away with a control joint where the two walls meet or do they not allow that where you are? Thx
Hi mate. Yes we are able to do a control joint in this area. I think it comes down to personal preference and what the inspector is happy with. I've had no issues raised using toothing in or control joints 💪
This may be a dumb question but why was the mortar a different color on this job?
Hi mate, on this job we're using red sand. Other jobs we're using yellow ☺️
@@IzzytheBricky right on! I figured it'd be something like that 🤣 I had to ask though! Thanks for the work you put into your videos too btw you have me super tempted to get into an apprenticeship.
@@e.l.2225 Cheers mate! And you have nothing to lose giving it a go mate 💪
I’ve got the evo cutter there good
Brilliant bit of kit🤜🤛
looks like test your trowel day
😂😂 always swapping and changing trowels me
You mentioned about the internal pillar but did not appear to build one ???
Hi mate! Yes I'll build it at the end💪
Thought it was odd cheers for the reply
Never known a neighbor say how they want brickwork done.
😂😂 I know, but gotta keep everyone happy, especially as it's facing her house 👌 I prefer to tooth work in anyway, makes for a much better job in my opinion. hope your keeping well buddy
How do you find the time to edit your videos, two or more jobs on the go and the gym ?
Keeping you honest, either way
Hi mate...I'm currently sat and the sofa editing the next video now before heading to the gym at 7:30.
I'm very impatient as a person, so when I start something I like to get it finished ASAP. I like to use my time wisely, when I have lunch/if I have lunch at work, I'll start cutting up videos and that so make it easier on later for me.
Video usually take between 3-4 hours EACH to edit..sometimes more (if I get distracted)
The gym is strictly in and out, 45 50 mins max😂 I use to spend most of my spare time watching my other favourite CZcamsrs (Steve and Alex, Charlie so on) and TV but now I just work on my own stuff till about 9:30, eat, TV bed..maybe attempt to clean the house, but I think I'll just get a cleaner 😂 the weekends if I'm not working...no phone, no IG or CZcams, it's me time with my mates or partner ...and Monday comes back round to do it all again. Hence why I had the month break buddy. Had alot of things going on in real life, so CZcams took a back seat, as it eats up my time😂
@@IzzytheBricky Grand effort Izzy , onwards and upwards
this link doesnt work for me izzy whats the saw called cheers mate
Hi mate, all sorted for you. Try it now brother
Set out wrong didn’t you 😅 you came 890mm starting with a full brick but if your toothing out you should’ve started with a header? Easy mistake, great work though been watching you for a while very good work lad! 👏
Hahaha I spotted that when editing! I corrected it when setting out, but couldn't be bothered to go back and redo the clip 😂 keen eye! Happy to know you've been watching a while 💪
890, then 1790, 10 mil missing after 890, love your work , fantastic x
@@des8615 thanks mate 💪💪
What part of England are you in
Hi mate, I'm Derby way
Are you based in London?
No sorry mate, Derbyshire way
too bad it requires a cable tho
Whats happened to the mic?
Few issues with the audio keeping in time with the video
I'm sorry but I don't like dry verge.
Each to their own, dry verges are just really quick 👌
Looks a good cutter keep it clean 🧼 lol brickdust gets everywhere
Cheers mate, and fantastic cutter! Was well impressed mate 💪 haha I'll do me best
Why 600mm deep concrete
Just an example I picked out of the air mate ☺️
@@IzzytheBricky costly ..150 mm 200 mm
@@robertnapier4455 never done a footings with that shallow of footings. Definitely wouldn't pass around here. Maybe for a small wall..5 course high max
@@IzzytheBricky ok
@@IzzytheBricky suppose dif reg
Brick match doesn't look very good
What is this a brokeback mountain video
😂😂😂😂😂
Just the picture for the vid on CZcams you boys have been hard on the weights 😂
@@shanesloan3859 everyday mate 💪
Wie immer ,gute Arbeit ! 👍👍👍👍👍👍👍🙋♂️
Thanks so much mate 🤜🤛😀🧱