One of my favourite videos I've put together, especially the montage at the end! Very happy to have this job done and dusted for my parents! ONTO the next one 💪 Thanks for following this series everyone, much appreciated! Have a great week
It’s on the piss 😆😆😆 super video buddy your on the top of your game buddy. Channel will go places 1 of the best on here. And keep a eye on a good few 🤟🤟😎
😂😂😂 made me chuckle that bit 😂 cheers mate appreciate your support as always! Hopefully some new jobs starting soon as well as the mansion build we're doing
Yes Izzy , very slick my friend 🤙🏽. Loving the new style. Quick tip … when you’re on hop ups get your stand and spot board then repeat on top , a lot less up and down the ladder 🪜 and you won’t end up a cripple like me 😫😂🧱👍🏼
Eeey thanks alot Steve mate, appreciate it! I'm digging making these new style of videos tbh 🤜🤛🧱😍 Ooo that's 10000 IQ there mate! I'll be doing that from now on...as I'm too lazy to set up a scaffold 😂 ey it's all those rollercoasters mate knackering you up 😂 I see you 🤫
Beautiful stuff. Carlsberg don't do sons.. Only thing I would say is if there is mains cable in that conduit at 13:40 with the right angled bend then I think you would be well advised before plastering to redo the chase so it runs in a permitted zone (vertically or horizontally from a visible accessory). There were some electricians on Google who seemed to think permitted zones don't matter if you have RCD protection but I am ~95% sure they've misunderstood regs. This is assuming it's not going to be deeper than 50mm once you've boarded everything and it's not armoured etc. If there's a low level socket hidden behind that plasterboard it might technically be all right but consider someone takes the socket off, sees the cable runs down to floor and assumes there's nothing in the wall above 🤔.
Thanks so much mate for pointing that out to us! I'll pass the information onto my parents mate! I don't know anything about sparky work mate..can hardly rewire a plug without blowing up the house 😂😂😂
As already said, your parents must be so proud of you to be able to do this job. Just a quick question please Izzy? If the pillar was meant to be 450, how do you do that? 215+215+10 for the perp is 440. How do you make it 450? Your Dad was super cool with it all having a wider entrance. Full marks for showing it. 🍺
Thanks fella, appreciate it! They seem very happy! ...yea no clue about the 450mm wide pillar mate. Lucky for me I ignore the drawings anyway...so don't matter too much 😂😂 haha yea I thought it was quite funny really and like to show some F ups...not all of them though....we don't want hour long videos do we 😂🤫🍻
Cheers Robin! Glad you enjoyed it 🤜🤛 😂😂😂 really made me giggle gonna lie...as it's the family I/they wasn't bothered...so I got off lucky 😂 Cheers for your support fella
Indont think you put any ties in from the blocks tobthe bricks on that last top section ..or did I miss something!!? you fixed the blocks to the timber , but....🤔 tell me Im wrong 😉
Great videos fella! And great workmanship. What make is the laser level kit ? I’m a landscape gardener and wondered if it would work in my area of work?!
Dunno if it's your dad's Izzy but those metal Makita chop saw tables might be old but mines still going strong and ever so handy 👍🏻 oh, and the video wasn't bad either 😁
Hiya mate! Yes it's his mate! I remember working with him when I was 14 and he had it back then 😂😂 probably older than me 😂 Cheers matey appreciate it 🤜🤛
I require a bricklayer in Sutton Coldfield for a large extension. Previous bricklayer was asked to leave site due to poor workmanship. Any recommendations please?
Tha ms Jason appreciate it! And no your right mate😂... honestly the top few course didn't get pointed up..so I'll probably go back and make sure that's done.
One of my favourite videos I've put together, especially the montage at the end! Very happy to have this job done and dusted for my parents! ONTO the next one 💪 Thanks for following this series everyone, much appreciated! Have a great week
Excellent, your parents are no doubt over the moon, you're a good lad, and they'll be very proud of your success 👍
Thanks Mark! Yea they seem very happy with both extensions! Appreciate your support buddy! Glad you've enjoyed watching along
Да это настоящий работа для меня за что и ценю ваш канал он очень интересный а человек вы позитивный.
Lovely job lovely music lovely guys !...
Cheers mate really appreciate it! New video out tomorrow ☺️
Drew did a really nice job of pointing up the neighbour's side wall...even his knocking up muck is improving!
Yea his pointing is awesome now mate! Just need him to be ahead so he can now be constantly on the trowel 💪
Great video izzy. Give us a peak when job is completely finished. Keep them coming lads. "Yes yes"
Thanks mate! Yes don't worry I'll definitely be doing update video on this job☺️ thanks again Eamon, have a great week!
It’s on the piss 😆😆😆 super video buddy your on the top of your game buddy. Channel will go places 1 of the best on here. And keep a eye on a good few 🤟🤟😎
😂😂😂 made me chuckle that bit 😂 cheers mate appreciate your support as always! Hopefully some new jobs starting soon as well as the mansion build we're doing
Lovely job izzy your parents must be buzzing as well 👏👍
Thanks Bob! Yes, there very happy...I hope😂💪🤜🤛
Cuddles for mum and dad 👍
Another great video izzy.your a great lad.parents must be proud of ya.
Thanks Dave mate💪🍻 parents are buzzin mate! Cheers for watching the series mate!
Great attention to detail 👏 Another job complete, happy days👍
Thanks fella! Another one to add to the list 🤜🤛 thanks for watching mate! Hope you had a good weekend
Great videos. I would like to see a longer videos if possible please. 👍👍
Thanks so much Delvin! I'll work on it buddy ☺️ have a good week 🤜🤛
Stunning brickwork Izzy
Thanks mark
Your smashing it mate. Glad to see you doing well 👍🏻👍🏻👍🏻
Eey cheers brother appreciate it! Long time no chat, hope you and the family are good 🤜🤛
Yes Izzy , very slick my friend 🤙🏽. Loving the new style.
Quick tip … when you’re on hop ups get your stand and spot board then repeat on top , a lot less up and down the ladder 🪜 and you won’t end up a cripple like me 😫😂🧱👍🏼
Eeey thanks alot Steve mate, appreciate it! I'm digging making these new style of videos tbh 🤜🤛🧱😍
Ooo that's 10000 IQ there mate! I'll be doing that from now on...as I'm too lazy to set up a scaffold 😂 ey it's all those rollercoasters mate knackering you up 😂 I see you 🤫
@@IzzytheBricky . 🎢🙌🏽🤩🤩🤩😉
2 of the nicest lads ever brilliant work
Thanks so much Mick🤜🤛
Great videos Izzy, keep up the good work.
Thanks Steven, appreciate it buddy
Great job. Spect you were fed well again 😋
Cheers fella! Y'know it mate! Drew loves coming to this job😂 Have a good week mate
Well done izzy racing dogs trap 4🐎🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕🐕
Cheers Matey 🤜🤛
Your work 10out of 10 the pointing what can I perfect 👌
Thanks so much mate 💪
I love your videos, keep going
Cheers matey! Hope you had a good weekend 🤜🤛
@@IzzytheBricky Thanks hopefully I will be a bricklayer apprentice soon
i use a great tip to stop your soilders from leaning out towards you if you knock the back corner off with your brick hammer they'll be sound
Cheers buddy! Very handy tip, especially the bricks have a whip in them 🤜🤛
Great content as always mate
Thanks alot Glenn 🤜🤛 hope your well
Beautiful stuff. Carlsberg don't do sons..
Only thing I would say is if there is mains cable in that conduit at 13:40 with the right angled bend then I think you would be well advised before plastering to redo the chase so it runs in a permitted zone (vertically or horizontally from a visible accessory). There were some electricians on Google who seemed to think permitted zones don't matter if you have RCD protection but I am ~95% sure they've misunderstood regs. This is assuming it's not going to be deeper than 50mm once you've boarded everything and it's not armoured etc. If there's a low level socket hidden behind that plasterboard it might technically be all right but consider someone takes the socket off, sees the cable runs down to floor and assumes there's nothing in the wall above 🤔.
Thanks so much mate for pointing that out to us! I'll pass the information onto my parents mate! I don't know anything about sparky work mate..can hardly rewire a plug without blowing up the house 😂😂😂
LMFHO 🤔🤔🤣🤣😎😎💞💞👍👍Great job again Izzy👏👏🌹🌹
Thanks Darren mate! Glad to have this wrapped up now💪
🤣🤣🤣 great video as always , top job lads 💪🏻💪🏻💪🏻
Thanks fella! Enjoyed making this one! Have a good week buddy
Lovely job again mate keep the good work up 🧱
Thanks Aaron! Happy to have this finally done ☺️ hope your keeping well
@@IzzytheBricky all good my friend cheers hope yous are keeping areet and loving the new bit off editing your doing
@@aaronhanratty6018 thanks so much mate! We're changing the game 😉🤫😍
As already said, your parents must be so proud of you to be able to do this job. Just a quick question please Izzy? If the pillar was meant to be 450, how do you do that? 215+215+10 for the perp is 440. How do you make it 450?
Your Dad was super cool with it all having a wider entrance. Full marks for showing it. 🍺
Thanks fella, appreciate it! They seem very happy! ...yea no clue about the 450mm wide pillar mate. Lucky for me I ignore the drawings anyway...so don't matter too much 😂😂 haha yea I thought it was quite funny really and like to show some F ups...not all of them though....we don't want hour long videos do we 😂🤫🍻
Great camera work Drew!
Mint ain't he! Really added to the feel of the video. Final finale 🤜🤛
@@IzzytheBricky who ever edited it as well got the tempo right. Keep it up, looking forward to your next project.
@@BerkleyBuilds thanks so much! I do all of the editing and take alot of pride in that as well as my Brickwork
Excellent work from both of you.
Bet you had a sleepless night over that pillar measurement 🤣
Cheers Robin! Glad you enjoyed it 🤜🤛 😂😂😂 really made me giggle gonna lie...as it's the family I/they wasn't bothered...so I got off lucky 😂
Cheers for your support fella
Hey Izzy, please excuse my ignorance but why didn’t you need weep vents in the soldier course? Was it because the roof is directly above?
Hi mate, if it's less than 600mm of masonry above dpc and wheeps are not needed ☺️
Indont think you put any ties in from the blocks tobthe bricks on that last top section ..or did I miss something!!? you fixed the blocks to the timber , but....🤔 tell me Im wrong 😉
You just finished a Extensiom for family ,I have just started one only difference is I am doing the hole lot, block laying carpentry and the rest
Oh wow what an undertaking mate! Best of luck to you! Enjoy your week and thanks for watching 🤜🤛
@@IzzytheBricky ya will be takeing up alot of weekend lucky it's a small one
Great video ❤
Thank you Osian! 😀
Great videos fella! And great workmanship.
What make is the laser level kit ? I’m a landscape gardener and wondered if it would work in my area of work?!
Hi mate thanks so much! Appreciate it massively! It's an Imex E60 Lazer! Would definitely work for you 😀
Excelente trabajo 👊 🧱💯👏💪👌🏻❤️❤️
Thanks buddy! Always appreciate ya comment 🤜🤛💪💪🧱
Impressive work 🔥👏
Thanks fella 💪
Excellent work 💯
Thank you! Cheers!
Dunno if it's your dad's Izzy but those metal Makita chop saw tables might be old but mines still going strong and ever so handy 👍🏻 oh, and the video wasn't bad either 😁
Hiya mate! Yes it's his mate! I remember working with him when I was 14 and he had it back then 😂😂 probably older than me 😂
Cheers matey appreciate it 🤜🤛
could you laser from one pillar to another and then mark it on the wall and drop a level down ?
liked and subbed
Thanks so much mate, really appreciate it! Welcome and tha ms for the support ☺️
Well played bud
Yeeaaa boiiii 🤜🤛
Izzy my friend!! Fancy a trip to the isle of wight? Extension project
Haha I'd love it mate, but probably a bit too far for my liking 😂🤜🤛
Ma and pop must be over the moon
Cheers mate! Yea they are buzzin now it's done ..I did tell them I'd have it wrapped up by end of September 😂🤫🤫...ey beggers can't be choosers ey
Hahaha you did a great job and it’s only 6 weeks off. At least they trusted their builder innit, that’s worth a lot
Nobody can match your work keep buzzing and my next project I will ask you to do brick work for me
Cheers mate appreciate it! Always happy with a trowel in my hand 🤜🤛
I require a bricklayer in Sutton Coldfield for a large extension. Previous bricklayer was asked to leave site due to poor workmanship. Any recommendations please?
Hi mate, did your parents have to get planning permission for the garage extension?
Great job 👍 But the inside of the garage wall looks a bit rough, or is that just the bricks being off? 🤔
Tha ms Jason appreciate it! And no your right mate😂... honestly the top few course didn't get pointed up..so I'll probably go back and make sure that's done.
You had to get it right or your dad would never have let you forget it
😂😂 that's it mate
deffo getting the hang of it lol any reason you didn't joint inside garage?
Cheers Scott! How've you been
@@IzzytheBricky good mate thanks
Why did you put a brick in the centre of the column ?
Just making it stronger mate 💪💪
@@IzzytheBricky I could understand that IF you had filled in the gaps ... like the Yanks do with their hollow blocks
hi,where is youre postcode in london ??
why didn't you point the inside wall of the garage, it would have looked better.
I'll get to it 😂🤜🤛
Lovely work mate, video editing ent to bad either 👊🏻
Thanks so much Ashley! Really working on the production of the videos ☺️ happy someone noticed it 🤜🤛
What lazer level do you use ???????????????????????????
Hiya mate Imex E60☺️
👍🧱nice one
Yeeaa boi, cheers my mate! How ya been
hi where i can find you on london ??
Hi mate I'm not based in London sorry
Belting video and end result buddy... Nowt better than looking after your mum and dad..
Thanks mate! Glad you enjoyed the video and that mate! Yea was nice to help and get this out the way 🤜🤛
Could you do a video on how you learnt to see and overcome doing tippers consistently ??🧱
Sure mate I'll try to get that sorted for you, as I think a few people could benefit from it ☺️
@@IzzytheBricky thankyou , looking forward to it 👌