We missed the videos for sure even if it was snake action. For your m18 snake find out what thread that is and run an cam nut and a longer screw. The cam nut will let you pull the lever and and tighten it almost bypassing the internal threads. It's thr same principle as a bikes quick release seat post. Worst case you can put a worm drive pipe clamp? Cheap and effective.
yeah, many folks run a spear head or small wad/root cutter only and exit fast. what that does is punch a snake like hole through any/all pipe larger diameter, BUT it also usually avoids breakages, collapsed/crushed sections. I have experience in a dual line cable breaking and pure luck recovering it by hand(40' in) with 3" root cutter in 4" cast iron/clay tile combined. big cart mounted electric eel model with very pre-kinked and worn through outter cable section. I was backing it out slowly and it bound on a section of broken pipe or the transition joint, before i could let off the button it went RRrr, SNAP. when the outter cable broke it made the inner shear, damaged as wlel long before me! (rental machine). they didn;t charge for it, even though I should not have ran it in knowing it was wonky( it did make a nice secondary scrapper on the 70+ line) lol.
No problem bro!! I'll have to take a look! Thanks and definitely a good idea. I seen u tape a chain knocker to the camera but does that work with thick roots or do I have to clean it out first with a snake
Wow bro, you’re all dolled up. Wtf you wearing a silk handyman shirt 🤣welcome back nothing like getting back on the horse or in your case back on the snake👍👏
Lol I'm already using the m18 12 amps which are stupid expensive. I don't think I wanna spend more money on batteries. But if you wanna see batteries tested with different amp hours look up project farm testing drill batteries I think 🤔
@thehandymanexperience226 oh shoot 12 amps is seriously strong enough. Nahh I just wanted to see it on that machine only. I think I'm gonna get it also. I had a little battle with roots the other day that almost defeated me lol
Saw you using a Milwaukee backpack tool bag in one of the first videos I came across before subbing to your channel. Have you looked at the Veto Pro Pac’s yet? They have some pretty badass tool bags.
I use the same Milwaukee setup and the same Vevor camera..... If i have to use a camera and a sectional its a minimum of $350. and it goes up from there...I'm actually considering getting into home warranty jobs because of this channel....did this job/call pay you pretty good?
yea i used to throw my snake in, then move my camera in, line up the head of my snake with the root ball, put the auger in neutral, take out the camera if youre scared, and run it for a little in that same position, or go back and forth since you now know where youre at in the line.
@@thehandymanexperience226 yessir wasnt sure if someone already mentioned his channel to you or not but yea he uses a pressure washer with root cutting attachments it works really really well but it seems like you mostly need access to an outside cleanout but then again ive seen some of his videos where he just reels the hose out and goes from the inside
jetting setups are great, when you can block all the indoor points and have outdoor cleanouts (it's what all the sewer and sanitation departments use). but as Olly does, many times indoors and major back-ups across the outback(Australia) it makeas a huge mess. not that removing a whole house trap cover doesn't do about the same when indoors (ny drains). handyman makes minimal mess, which is grea when the place is not already wrecked from sewage!
I was getting the geo graphing yea 15,000 is about right but if you look it up it might take up to 3 or 4 sessons but I should be happy after 2 times. I don't really see any scaring . Not sure what the hair looks like in the back where they rip out the individual hairs tho
That's a good idea I might. I didn't wanna go over there since u always hear about bad experiences definitely alot cheaper out there. Yea it's like $15,000 per session lol I had 2 and the second was $13,000
Hahahahha I know right ! Guys at my old work would mess with me the ones that already shave there heads cus their balding and they would be like it's cool brian I got a shaver in the back of my truck. Problem fixed lol
honestly, myself I'd just go chrome dome/turtle wax/shiny head, before doing/wasting time on any of the marketing bull-snot . but that's just me, the moddest jackwad whom doesn't care what others think about me. well as long as they aren't in my face gum-flapping about it, if so, who knows what may occur. (P.S. I never noticed anything wrong or odd about your hair to start with) 🧐 I am far-far more judgemental about work quality and materials, which can harm or kill others when done very wrongly.🥸
We missed the videos for sure even if it was snake action. For your m18 snake find out what thread that is and run an cam nut and a longer screw. The cam nut will let you pull the lever and and tighten it almost bypassing the internal threads. It's thr same principle as a bikes quick release seat post. Worst case you can put a worm drive pipe clamp? Cheap and effective.
Lol yea I have to wear button ups for awhile so I don't rip my hair out lol 😅
yeah, many folks run a spear head or small wad/root cutter only and exit fast. what that does is punch a snake like hole through any/all pipe larger diameter, BUT it also usually avoids breakages, collapsed/crushed sections. I have experience in a dual line cable breaking and pure luck recovering it by hand(40' in) with 3" root cutter in 4" cast iron/clay tile combined.
big cart mounted electric eel model with very pre-kinked and worn through outter cable section. I was backing it out slowly and it bound on a section of broken pipe or the transition joint, before i could let off the button it went RRrr, SNAP. when the outter cable broke it made the inner shear, damaged as wlel long before me! (rental machine). they didn;t charge for it, even though I should not have ran it in knowing it was wonky( it did make a nice secondary scrapper on the 70+ line) lol.
Scary stuff man!!!! Yea that's my worse nightmare is breaking the cable!
Welcome back, Brian. Great video
Thanks man lol 😆
Thanks for the shout out! I’m still running the vevor camera can be seen in my last video of me replacing a sewer line. Keep up the good work.
If I find a root spot that I can’t seem to get I will put snake in then check that I’m in the right location with camera. Then work back and forth.
No problem bro!! I'll have to take a look! Thanks and definitely a good idea. I seen u tape a chain knocker to the camera but does that work with thick roots or do I have to clean it out first with a snake
Wow bro, you’re all dolled up. Wtf you wearing a silk handyman shirt 🤣welcome back nothing like getting back on the horse or in your case back on the snake👍👏
Decaf coffee due to hair transplant procedure? Always knew I was just gonna let myself go bald. 😂
@@oldfredbear lol can't have caffeine right now
✌️ Weeks!!!!! 🤨
You'll have a great head of hair bro 💪👍
Thanks man!!
keep watching Utube and increase your tips and tricks, thxs for sharing...head over to Mom's soon
I know I'm due lol 😆
Holy shit bro, put a dam hat on
Lol 😆 I do when I show up on the job 😆
I noticed you like to go with "badda boom badda bing" instead of the ol "badda bing badda boom"
@@GuerrieriCarl lol 🤣 hahaha
Can you please try that drain snake with a Forge battery please. I want to see if it'll perform better in roots and stuff
Lol I'm already using the m18 12 amps which are stupid expensive. I don't think I wanna spend more money on batteries. But if you wanna see batteries tested with different amp hours look up project farm testing drill batteries I think 🤔
@thehandymanexperience226 oh shoot 12 amps is seriously strong enough. Nahh I just wanted to see it on that machine only. I think I'm gonna get it also. I had a little battle with roots the other day that almost defeated me lol
Welcome back, missed the videos. You take a pill as well? I’m on Finasteride and it does help keep hair and grow new hair and it’s just 1 pill a day.
I do the guy told me to cut it into 4 and take a 1/4 every day it makes the prescription last forever
i will stick to my spartan 300 and Gorlitz sewer machine
Yep there will always be a better mouse trap
Saw you using a Milwaukee backpack tool bag in one of the first videos I came across before subbing to your channel. Have you looked at the Veto Pro Pac’s yet? They have some pretty badass tool bags.
They are definitely nice but there heavy. I light the Milwaukee bag cus it hooks to my pack out case
I use the same Milwaukee setup and the same Vevor camera..... If i have to use a camera and a sectional its a minimum of $350. and it goes up from there...I'm actually considering getting into home warranty jobs because of this channel....did this job/call pay you pretty good?
The home warranty company is a handful I haven't been taking anymore work from them but I only dealt with 1 company
Jetter purchase time.
Lol seems like alot of people r pushing me for the jetter!
yea i used to throw my snake in, then move my camera in, line up the head of my snake with the root ball, put the auger in neutral, take out the camera if youre scared, and run it for a little in that same position, or go back and forth since you now know where youre at in the line.
Definitely a awesome idea!
I think your going forward to fast let the cutter work
This is true!!
you should get a setup like the drainaddicts channel
@@psyfertech I'll have to take a look! Thanks
@@thehandymanexperience226 yessir wasnt sure if someone already mentioned his channel to you or not but yea he uses a pressure washer with root cutting attachments it works really really well but it seems like you mostly need access to an outside cleanout but then again ive seen some of his videos where he just reels the hose out and goes from the inside
jetting setups are great, when you can block all the indoor points and have outdoor cleanouts (it's what all the sewer and sanitation departments use).
but as Olly does, many times indoors and major back-ups across the outback(Australia) it makeas a huge mess. not that removing a whole house trap cover doesn't do about the same when indoors (ny drains). handyman makes minimal mess, which is grea when the place is not already wrecked from sewage!
For what its worth i didnt think you had any thining.
Thanks man!!
It looks painful!
A little
@@thehandymanexperience226 looks good though, gotta pamper yourself sometimes too, it's the little things
You have some guts, Brian. My hair has been a toilet seat since I was about 40.
It's so pricey. Man my head blew up like a mushroom!
How much will it cost you in the end for the hair? Wondering if I should do mine… when you go bald you’ll have scars. I was thinking like 15k at least
I was getting the geo graphing yea 15,000 is about right but if you look it up it might take up to 3 or 4 sessons but I should be happy after 2 times. I don't really see any scaring . Not sure what the hair looks like in the back where they rip out the individual hairs tho
what's up with the cut
Got a hair transplant so I had to shave my head
holy SHT hair transplant!. Homie hook me up!. now you gotta get on trt and hit the gym dawg. Get them lonely housewives
Lol I used to hit the gym all the time back In the day 😆 stupid hair transplants costa a arm and a leg
@@thehandymanexperience226 can you make a vid on your experience, where, why there and how much?. Why didn't you try going to Turkey?
That's a good idea I might. I didn't wanna go over there since u always hear about bad experiences definitely alot cheaper out there. Yea it's like $15,000 per session lol I had 2 and the second was $13,000
Just get a Trump hair wig
😆
Brother. Why spend all that money on a hair transplant. You throw a hat on and wammo donesky. 😂 I'm just messing with you bro. To each their own.
Hahahahha I know right ! Guys at my old work would mess with me the ones that already shave there heads cus their balding and they would be like it's cool brian I got a shaver in the back of my truck. Problem fixed lol
@thehandymanexperience226 Yea my hairline has be receding since I was about 30. I'm 40 now. I wear a hat everyday anyways so I'm like oh well.
honestly, myself I'd just go chrome dome/turtle wax/shiny head, before doing/wasting time on any of the marketing bull-snot . but that's just me, the moddest jackwad whom doesn't care what others think about me.
well as long as they aren't in my face gum-flapping about it, if so, who knows what may occur. (P.S. I never noticed anything wrong or odd about your hair to start with) 🧐
I am far-far more judgemental about work quality and materials, which can harm or kill others when done very wrongly.🥸
The chrome done is coming back, it's so common!