Kawasaki Ninja H2 SX SE (2019) Exterior and Interior

Sdílet
Vložit
  • čas přidán 26. 08. 2024
  • 2019 Kawasaki Ninja H2 motorcycle seen from outside and inside. The vehicle has four-cylinder in line, 4-stroke, liquid cooled with compressor, Double ACT, 16-valve, 998 ccm engine. Compression ratio 11.2:1. Bore x Stroke 76x55 mm. Fuel injection Ø 40 mm x 4 with double injectors. Electric start. Forced lubrication wet sump with oil pump. Max power 147.1 kW (200 hp) at 11000 rpm. Max torque 137 Nm (14 kgfm) at 9500 rpm. Fuel consumption 5.7 l/100 km. Carbon dioxide emissions of 139 g/km. Transmission is 6-gear dog-ring system. Clutch is multidisc in oil pump and manual. Final drive by sealed chain. Frame is lattice, high-strength steel with swingarm mounting plate. Trail 103 mm. Wheel travel front 120 mm. Wheel travel rear 139 mm. Front tire 120/70ZR17M/C (58W). Rear tire 190/55ZR17M/C (75W). Length 2135 mm. Width 775 mm. Front brake by double discs semi-floating 320 mm. Two monobloc radial calipers with 4 opposed pistons. Rear brakes are simple disc 250 mm. Double pistons calipers. Front suspension is upside-down fork 44 mm with regulated compression, release, preload, and upper springs. Rear suspension is new Uni-Trak with gas shock absorber with separate tank and upper springs. Regulated compression, release and preload. Height 1260 mm. Wheelbase 1480 mm. Clearance 130 mm. Fuel tank 19 liters. Seat height 825 mm. Weight 260 kg. Color is Green Emerald Blazed / Black Metallic Diablo.
    The motorcycle was shown at Paris Motor Show 2018.

Komentáře • 11