Few people know how these carbide inserts work in turning metal
Vložit
- čas přidán 9. 05. 2024
- A Brief Chat about Carbide Tooling !!!
==================================
Good afternoon, friends!!!
My name is Sergey, I am the author of Cool Ideas DIY channel. On this channel I present everything that I made with my own hands at home. Creative ideas, useful tips, homemade tools and inventions. Welcome to my channel - Cool Ideas DIY!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative ideas
🔥Make in home
🔥Life hacks
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share! - Věda a technologie
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](http://i.ytimg.com/vi/dpPmYYexQJ8/mqdefault.jpg)
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](/img/tr.png)
What a relief not hearing crappie music
And you did a good job of your video
Just wished there was a little more detail in the actual cut or finished product
Thanks, my friend❤❤❤
Thanks and welcome!
Very good👍
Thanks!
You are a master of your craft!
Thanks my friend and welcome!
I’ve only been doing this for 50 years, but if I’m working to a very fine tolerance, +or- 0.0001” , or thereabouts, I find it much quicker to rough turn to plus 0.010” and cylindrically grind, inside and out.
So now we know that carbide inserts will cut metal.
It's a good thing😁Welcome!
Good work man !!
Muy útil he interesante,
Un saludo
Gracias, amigo mío.
Molodyets Sergey. Do you know if you would get acceptable results with positive top rake WNMG inserts on a small lathe?
Thank you! I think you should try it on a small lathe! Welcome my friend!
That’s great. But, what kind of finish will they produce at a lesser depth of cut? Say, spec is +/- .0002, true it is a total of .0004. One would dial in with “small” increments.
Thanks, I'll give it a try)
What was the point of that
Is a DRO necessary for that job?
👍👏
👍🤝🙏
He should have explained the difference in the performance on different material is dictated by the corner radius. Softer the material the larger the radius.
MASHA.ALLAH.GOOD
Thank you, my friend.
Good job Guy ;oP
🙏🙏🙏
thks
🙏
Number four is a very good chip breaker. They were length perfect. Number one had a bad finish, but it didn’t look to be working hard enough? While fannying around on my lathe I’ve noticed that really working it gives a better finish. Skim cuts can be the worst.
أللهم صلى وسلم وبارك على نبينا وحبيبنا محمد صلى الله عليه وسلم ❤❤❤
💯👍🤝
👍🤝🙏
😊👍👍👍
👍🤝🙏
Não entendi nada kkk ...kkkk
Hai intenzione di mostrare come si toglie la ruggine.?.?
No entendi
No me gusta hacer de menos a nadie .
Ahora jubilado , antes ingenieria del mecanizado .
Hay muchisima gente profesional que conoce todo el SISTEMA ISO , DE DENOMINACIONDE INSERTOS TANTO DE FRESADO COMO DE TORNEADO ,
INCLUIDO SUS CALIDADES Y CUALIDADES , SEGUN MATERIAL. ( P M K etc )
Asi como VC , avance por RPM , ETC .
SALUDOS !!#
When I learned machine trades I had to grind my own bit from High Speed Tool Steel. Insert bits like that were just starting to come around. Teacher of the class had a hard time finding a bit that would withstand the force exerted on the bit from this forged Stellite die for drawing wire.
Weil es kaum Metal Facharbeiter gibt 👎
Seems like this person doesn't know either.
you have confused the box
What did I saw here? He did not even name the inserts! The results looked very similar at 2..6), why did he prefer 5? Why did he always knocked on the DRO?
Great waste of time.....
This video is useless
Welcome!
@CoolIdeasDIY-qv1nz
What was the conclusion? It is not very clear at all. It looks like they all did more or less the same job. Aby difference is difficult to see. No explanation...
@@drafty0183 In this video, I show step-by-step that this record can work with a lot of removals!
@@CoolIdeasDIY-qv1nz Working on CNC lathes for years. VP15TF is crap. Video is useless.
@@idudodomu What kind of plates do you use? What do you think are the best?
very best king class show
Thank you so much.
Bonjour, peux-tu nous écrire le type de plaquette, on ne voit pas bien sûr la boîte, merci, très intéressant !