NEVER TOW WITH ALUMINUM SPACERS! TRY THESE INSTEAD...
Vložit
- čas přidán 24. 04. 2019
- Check Out Our Current Diesel Truck Giveaway! 🎟🥇
www.enthuzst.com
_
Find me on Instagram! @Durrrrtymax | @EnthuzstApparel
Like Us On Facebook! / enthuzst
_
PART DISCOUNTS - Use Code "ENTHUZST" For any / all!
- WEHRLI FAB - Free Shipping: www.wcfab.com/
- RECON LIGHTS - 20% Off: gorecon.com/
_
Lime Ridge Auto (Seriously.. Go Check Them Out!)
/ lra_dieseltrucks - Auta a dopravní prostředky
If they're hub-centric you're fine, the load is transferred thru the ring. 6061 Aluminum, as long as the hub thickness (the lip of the centering ring) is 4mm+ the load transfer is about 28,853lbs with a safety factor of 4, it would fail around 110k lbs of vertical load. All of that is moot if you don't have a torque wrench and try the Ugga Dugga method of torquing bolts.
Idea: take the BIG TEX stickers off the trailer and put an ENTHUZST sticker there....
1DjScarface could do both with all that room. Maybe do Enthuzst sticker in big letters and the CZcams and Insta in smaller letters to the side, one above the other
I’m stoked for the new 2020 Silverado HD too! My dealership has several L5P’s scheduled for production 1st week of June!
Heck ya us farmers just got recognized by good ol durtymax jack!!! Lol great video man!
Definitely a great video for newer HD owners.. Keep up the great work brother! LIKE LEAGUE STAND UPP!!!
Great content as always Jack! Keep up the grind brother!
the song is Aries - Carousel
Where’s the content of the steel spacer on the truck?
I think your production quality is spot on brother! 👍🇺🇸
Awesome setup right there 👌🏻
That whole setup looks sick af!
What about shifted industries wheel spacers?
I look forward to every Tuesday, Thursday, and Sunday. I love your videos man keep up the good work!
The good thing about towing a goose neck is the better turning ability. Hauling a empty trailer you don't need to put your truck in tow gear. I like the look with the new truck and trailer package you got going on. I would have kept the 1ton to pull that trailer but to each their own.
That LML fits that trailer well and makes for an awesome towering rig
Looked great towing! Nice and smooth. The 15 didn't look like it struggled at all pulling that load, sounded good too.
Remember to grease the ball up next time you unhook. Can't stress that enough. Love it though.
Great videos as always man! I've got the Bora 2" spacers on my LLY and just hauled a 7k lb skid steer on a gooseneck with no problems! I've always been skeptical of wheels spacers but ik Bora is one of the best! I also check the lug nuts around every 3k miles or before I go on long trips just to ensure that they're properly torqued and have no problems
Maddmaxx_66 how are them spacers coming along i have some ready to install but just gathering info on safety since I tow a 34 foot travel trailer a lot
Man I love what you do it’s different and it give us the chance to have something from your channel keep it up
Love the dually!!!!!!!
I love this channel!!
God damn that trailer set up looks good with the daddy max can’t wait to see it with the white minimax
Hey man love the videos! I have an 07.5 LMM myself and would like to see an LMM or an LB7 as the next project truck!
XxAtReYu54xX Got the same body style but have the LML. My favorite body style for sure.
Yeah lb7 content
Amazing love these videos jack you need to upload more cmon man where alllllll wanting that
What kind of set-up do you plan on going with the new DMax? Dually or single wheels? Long box or short?
Enjoying the content, keep it up👍🏻
Love the videos true 4 life fan keep up awesome videos
are spacers hard on wheel bearings?
Hey from mountjoy i love ur trucks I got to see them in real life and their nice af
Word up brotha how ya doing..? I have a 2014 Chevy Silverado 3" level with 2” blocks on the rear on 20x12 and I'm looking on getting 275/45/20 general grabber at3 tires.. Question 🙋 can I run 2 inch spacers without rubbing or 1.5 inch would be my better option
Measure from the outer base of the wheel to the fender and that should get your answer 😬
Message me if you have any more questions !
Theres tons of hub centric spacers on Amazon/Ebay 🤷🏻♂️
U should put in the mirrors on the Trucks u pull
Steven Batten I was thinking the same thing
Bora or Stahl steels all day.
Dont turn the truck and trailer to a 90 degree angle (happens at times in tight areas) without unplugging the trailer 7 way plug until you get it in the bed. I only say this because I work at a dealership that sells trailers and parts and I allways see people do it and its one of those things where its a dumb mistake that can make you mad.
Just a heads up to try and prevent.
Great content!
You know how hard it is to turn a full 90° man it’s not easy unless you’re backing up
If you read it i said when your backing up
Looking sick😎
Grease that gooseneck ball...
Keep up the great vids man love the channel🇺🇸
When ur towing u can pull out ur mirrors
NICE set up.
I miss your old truck man it was so nice!
Those two Duramax looking Beautiful
Love you’re videos
Might have to put 2” spacer between my 08 dodge 3500 dually wheels. Going up to a 35” tire. Will I be safe towing my 38ft fifth wheel using quality Bora spacers?? Thx.
Can't wait for the new truck
Name of the steel wheel spacers
Hey @durtymax, that's a sweet setup. How high is your lift/tire combo? I am looking to lift my L5P, but I don't want to lose my ability to use a GN hitch after the lift. Thanks in advance!
Stoked!!!!!!
I bought supreme suspensions spacers which are both hub centric and lug centric. For $160 from amazon and they work great
SportTracNation lol I think the same
Loved the edit when you were at the gas station
Where do you buy the steel wheel spacers and did you have to trim the lug nuts?
My 3500hd is the same way. The stock ride is smooth. With a load even smoother.
I'm selling my 01 Cummins, has 93k original miles on it. I'm near Chattanooga, Tn. Putting it on truck trader tonight. I'm needing a full four door truck.
glad you are doing this upgrade, I was wondering what u where running. especially since you have big offset wheels that puts more stress on the studs too. I have question. do you know pa laws on if cdl required if trailers gvwr is over 10k? or is it that you are good till total truck & trailer gvwr is over 26k? I'm in nys and we can tow over 10k trailer as long as combined is under 26k. They updated it a few years ago. When I read pa law I wasn't sure by the wording.
The edits are awesome and great content
With the dsp5 switch would you only put the truck in the tow tune and or tow haul on the shifter?
Hey jack! I’ve got a both a WI and a TX plate off my Dmax if you would like them.
do you fill the bags before you load your trailer or after?
Do you have to trim your factory studs in order to fit adapters? In other words do the factory studs hit the back of the rims when mounted
Relays Jack. Install those damn Relays!!!!! Lmao
So i want to send my old plates to Jack. Where do i send it?
I know I'm gonna sound dumb with this question bbuuutttt, you're single rear wheel why do you have to put spacers on the back of your truck for towing?
Just for looks.
I have seen a lot of eBay and Amazon spacers that are hub centric
Was thinking the samething and ones that also have the wheel centric lugs ands the acorn style holes for the studs and lugs.....
@@christopherlueth123 I haven't payed that much attention to them but I believe your right
Are you going to be going to Kempton dirt drags?
Your other spacer video was the first ever video I watched on this channel
The word from dealers in Ontario, Canada you can order 2020hd in August then wait another 6-8 weeks, how are you getting it so early
Roll bed cover takes care of problem no rust on hitch
Never in my life did I think I’d be impressed by a trailer or thought that a truck would look better with a trailer. But DAMN, that looks so nice
goosenecks are easier to haul with rather than bumper hitched trailers
What song is that
People who came here for your diesel trucks are not going to complain about that turbo whistle.
what song is that
It’s gonna be May 🤞🏻🤞🏻
Egts on highway towing ?
If you want to talk about something hard to load try turning a skid steer around on the trailer. That’ll really make you sweat.
@Adam Felty You load it forward then turn it around for the weight transfer to be correct. You can also park the thing further back allowing for more space on the rfront for other items. If your just hauling thenskid steer, it can be whatever way you choose.. I personally haul mine backwards to have the machine further back on the tires vs in the direct middle incase i grab a load of cedar posts. or somthing.
Did you go with Bora for these steel spacers?
What size spacers are they on front and rear?
I wanna see a Chevy 5500 done
That truck and trailer with the mini max would be a nice setup
How do I send a new style Iowa plate? I see you have an old style one. We just changed plates to a new style an I have one sitting around
FOR THE DENALI PLEASE GET A 3500 SRW LONG BED 🗣🙏🏽
Hey bud love your trucks and fold them mirrors in for Safety
Any tips for someone new to towing
I made 600hp with my old sbc on 3in amazon spacers and I broke my axle shafts not my spacers😂 also I’m making 700 in my duramax on amazon adapters and haven’t had any issues🤷♂️
I run eBay spacers got them for $60 2.5 years ago and I rotate my tires about every year and I check the lugs every year and they don’t even budge. And I’ve hauled prolly about 5,000 tongue weight on them.
Has tow mirrors but doesn't use them😑
Great Video brotha! The daddy max would look baller up here in Maine. Hoping I get the keys to that big boy 🙏🏿
I was thinking the same thing when I read this. I hope you win and I see the truck around. I hope you have a great weekend!
I love Maine.
p.s I am from the Chelsea ME area.
Jason Strout I really hope I win, maybe you’ll get it too! I’m from and live in Portland but spend most my time on the lake in Bridgton. Hope you’re have a great weekend too brotha! Stay dry 😎
Is that safe to tow with a lift truck? I heard so many different things.
Gonna be coming down to gold ol benson. If ya haven't been to galot before your gonna love it man
Nice flooring sir
I've been towing on 2" aluminum spacers for 4 years with zero issues but you can never be too careful. If I ever see a sign of having issues I will consider steel spacers
Still good? Lol
Anyone know the name of the song?
Did you put the steal spacers on the back only?
You have a website for the steel wheel spacers
are the brand of the steel spacers Bora as well?
I don't think you should tow with any spacers. Spacers cause tremendous wear and stress on bearings and other components. Idk that's just my opinion
Colt Hund exactly what I was thinking 😂😂😂😂😂
@@Rustylarrysgarage glad other people are aware as well lol
Yep, that and offset. Thats just eating those bearings in no time flat.
Glad someone else knows what’s up haja
I need some good sized spacers so I can put some simi tractor trailer rims and tires on a 1980 Ford ranger.
Great content as always, but damn i hope i win Ron Burgandually.
Yeah make sure you do wheel spacers right. Make sure you get good quality hub centric spacers.
You should have stripped the bnw hick down the metal and painted it yourself the paint dose not last at all
Did you do a 20 +5 or a 25+5 on the trailer
How do i send you a plate?
You got it made my man, God dangit!!
Might sound crazy but we alrqady have 2 2020 denalis at out dealer in ny
Thomas Reardon you are lying
@@williamhavens9747 nope at at all
Thomas Reardon send me a pic on Instagram the w. Havens
You never said they brand of the steel wheel spacers what brand is it 🤯!!!